Rehau ABS edgebanding 327877-121 is an ABS edge banding from Rehau, Inc. that covers and protects raw panel edges, giving casework, fixtures, and cabinetry a finished appearance that matches the specified design. The SAP description 15/16X1.2MM ABS LE C200838 EMX LAC 600FT identifies this as an ABS edgebanding sized for edge treatment, so it runs along the edge of sheet goods where cores would otherwise be exposed. The 15/16 width provides full coverage on common panel thicknesses, so edges present a consistent face rather than revealing substrate. The 1.2mm thickness gives the edge band a defined profile, so edges feel solid in regular use on doors, drawer fronts, and carcass work. The 600FT length in the SAP description supports longer production runs, so shops can process multiple jobs using the same edgeband reference without frequent changeovers.
The 15/16 width in the 15/16X1.2MM ABS LE C200838 EMX LAC 600FT description gives installers edge coverage that slightly exceeds many common panel thicknesses, so trimming equipment can cut back to a clean, flush line after application. The 1.2mm thickness works as a defined edge layer, so trimming knives and routers have a clear material boundary when flushing to the board surface. The ABS designation means it is an ABS edgebanding, so technicians can run it on edgebanders set up for ABS material behavior during heating and trimming. The specific manufacturer part number 327877-121 identifies this exact configuration, so set-ups and job notes can reference the same code whenever the same edge appearance and thickness are required.
This product is classified as Edge Banding in the Miscellaneous|Edgebanding category, so it is intended for use on exposed edges of casework, furniture components, and similar panel-based assemblies. The ABS edgebanding material from Rehau, Inc. works on panel edges where a coordinated finish band is required to complement the chosen surface. Because the SAP description specifies 15/16X1.2MM ABS LE C200838 EMX LAC 600FT, it suits runs of parts that call for that 15/16 width and 1.2mm thickness, so all edges in the run match in visual thickness and proportion. The Rehau ABS edgebanding 327877-121 designation ties this edge treatment to a specific reference, so shops can align it with drawings, cut lists, and material schedules that call for this exact band.
The manufacturer part number 327877-121 gives installers and planners a single identifier for this ABS edge banding, so reorders and inventory labels point back to the same sizing and material combination every time. The 15/16 width supports a repeatable trim margin, so after bonding, operators can use the same flush-trim procedures across parts without changing expectations on overhang. With the 1.2mm thickness, the edge presents a uniform visual band, so when doors and drawer fronts line up, the revealed edges look consistent from piece to piece. The ABS material noted in the description defines thermal and cutting behavior, so edgebanding machines can be tuned based on known ABS processing parameters and then reused whenever this product code is loaded. The 600FT length allows a single roll reference to cover sequences of cabinet bodies or fronts, so projects benefit from one continuous run of the same edge detail.
Rehau ABS edgebanding 327877-121 is described as ABS in the SAP description, so it is an ABS edge banding suited to ABS-compatible edgebanding equipment and processing.
The SAP description 15/16X1.2MM specifies a 15/16 inch width and 1.2mm thickness, so it provides full edge coverage with a defined profile for trimming and finishing.
The 600FT detail in the SAP description indicates a 600 foot length, so it supports extended runs on edgebanders without frequent material changes during production.
This product is classified as Edge Banding in the Miscellaneous|Edgebanding category, so it is suited to edging panel-based cabinetry, furniture, and similar woodworking projects.
The 1.2mm thickness in the description creates a substantial edge band, so high-contact surfaces like doors and drawer fronts present a solid-feeling edge in everyday use.
The 15/16 width offers slight overhang beyond many panel edges, so trimming operations can flush the band cleanly to the surface for a uniform finished edge.
The Rehau ABS edgebanding 327877-121 product name, paired with the SAP description 15/16X1.2MM ABS LE C200838 EMX LAC 600FT, defines a specific ABS edge banding size and length that suits panel edge finishing. The 15/16 width and 1.2mm thickness support predictable trimming, so cabinet, fixture, and furniture edges align visually across a project. The ABS material and 600FT length help shops run this edge band through standard ABS edgebanding processes over longer sequences. Using the 327877-121 identifier connects design notes, shop drawings, and material orders to the same Rehau, Inc. edge banding reference for repeatable project results.
Sold In: 1 Roll