Rehau ABS edgebanding 327877-123 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so raw substrate is covered and protected on cabinet and furniture projects. The 15/16 inch width indicated by the 15/16 dimension in the SAP description gives coverage across common 3/4 inch board edges with overhang for trimming, which helps installers flush and square the edge after bonding. The 1.2mm thickness described in the SAP line provides a substantial edge profile that stands up to normal shop handling and edge trimming operations. This edgebanding is classified as edge banding in the product class, so it is intended specifically for edge finishing tasks rather than broad surface lamination, which helps focus it on bander setups and manual applications where a defined edge strip is needed.
The SAP description 15/16X1.2MM ABS LE C400815 EMX LAC 600FT documents that this Rehau ABS edgebanding combines a 15/16 inch width with a 1.2mm thickness, giving installers a predictable strip size to dial in trimmers and banders. The 600FT length in the same description indicates a continuous supply suitable for repetitive cabinet or casework edging, which can streamline production sequences by limiting downtime between runs. The designation as ABS in the description confirms the thermoplastic material type, which matters when aligning glue choice, temperature settings, and edge finishing steps with other ABS components in a shop workflow.
The classification as edge banding and the 15/16 inch width make Rehau ABS edgebanding 327877-123 suitable for covering exposed edges on panels sized around standard cabinet thicknesses, so it aligns well with casework, doors, and fronts that use similar stock. The 1.2mm thickness from the SAP description creates a defined edge that can be machined and lightly profiled, which is useful when panels need a consistent, furniture-like edge rather than a thin tape line. Because the product sits in the edgebanding category within a woodworking-focused assortment, it supports typical shop layouts where banding is applied to engineered wood or similar substrates as part of cabinet and furniture runs.
The 15/16X1.2MM dimension in the SAP description gives installers a fixed width and thickness, so edgebanding equipment and trimming tools can be set once and run multiple panels with consistent edge reveal. The 600FT length specified in the description supports extended runs of the same material, which helps maintain visual continuity and process stability across a full job without switching to a different edge strip. The ABS material noted in the description provides a known plastic edge type, so shops that standardize on ABS can keep bonding, trimming, and finishing processes consistent from one project to the next.
Rehau ABS edgebanding 327877-123 is described as ABS in the SAP description, providing a thermoplastic edge material that works with ABS-focused cabinet and furniture workflows.
Rehau ABS edgebanding 327877-123 uses a 15/16 inch width as indicated by 15/16 in the SAP description, giving coverage suitable for typical cabinet panel edges with trimming allowance.
Rehau ABS edgebanding 327877-123 has a 1.2mm thickness, noted in the SAP description, providing a substantial edge that can be machined and finished on standard shop equipment.
Rehau ABS edgebanding 327877-123 is described as 600FT in the SAP line, offering a continuous length that supports longer cabinet or casework runs without frequent material changes.
The 15/16 inch width spans standard panel edges with a bit of overhang, giving room to trim the Rehau ABS edgebanding 327877-123 back to a flush, clean edge.
The manufacturer part number 327877-123 uniquely identifies this specific Rehau ABS edgebanding, helping shops match existing work and reorder the same edge material.
Rehau ABS edgebanding 327877-123 combines ABS material, a 15/16 inch width, and 1.2mm thickness in a 600FT length, as described in the SAP line, giving shops a defined edge solution for cabinet and furniture panels. The precise manufacturer part number 327877-123 supports repeat jobs that need the same look and dimensions across multiple runs. For projects that rely on ABS edge banding within woodworking-focused operations, this Rehau option aligns with standard edgebanding practices and supports consistent edge finishing.
Sold In: 1 Roll