Rehau ABS edgebanding 327877-125 is an ABS edge banding product that finishes exposed panel edges, so cabinet and furniture work gains a consistent, professional edge line. The edgebanding belongs to the Edge Banding product class, which means it is intended specifically for covering raw substrate edges on panels and casework. The SAP description lists a 15/16 x 1.2mm size, so it suits applications needing an edge just under 1 inch wide with a 1.2mm thickness for a solid edge profile. The ABS material designation shows it is a plastic edgeband, giving a uniform surface that can be matched across multiple components. The C100364 EMX LAC reference in the description identifies the specific design variant, so repeat projects can stay visually consistent when using this same part number. Wurth Baer Supply presents this product under the Rehau, Inc. brand, which connects directly to established ABS edgebanding lines.
The SAP description specifies a 15/16 x 1.2mm dimension, so installers can plan for edge coverage that slightly exceeds many common panel thicknesses and leaves enough material for flush trimming. The 15/16 inch width provides working room along the edge, which helps during application when aligning and pressing the edgeband onto the substrate. The 1.2mm thickness gives a noticeable edge layer that supports a defined arris after trimming, so edges can be finished with a consistent profile from panel to panel. The SAP description also states 600FT, indicating a 600-foot length that supports longer production runs or multiple cabinets from a single product reference.
This Rehau ABS edgebanding sits in the Edgebanding product class and Miscellaneous|Edgebanding category, so it is aligned with projects that require covering exposed panel edges in woodworking, cabinetry, or similar panel-based assemblies. The 15/16 inch width from the SAP description positions it for panels near three-quarter-inch thickness, giving enough overhang to trim back for a tight, flush finish along case sides, shelves, and doors. With a 1.2mm thickness, the ABS strip provides a more substantial edge than very thin tapes, so door and drawer fronts gain a defined, solid-feeling edge line. The ABS material designation highlights a plastic profile that suits many laminate and engineered panel constructions, so casework, fixtures, and furniture components can share a coordinated edge material across the job.
The 15/16 x 1.2mm sizing in the SAP description gives installers predictable material to work with, so trimming and edge finishing can follow the same process from board to board. The nearly one-inch width allows a consistent setup at the edgebander or during manual application, because there is enough margin to handle minor panel size variations while still trimming back to flush. The 1.2mm thickness provides an edge that can handle standard trimming and light profiling operations without cutting through, so the visible edge continues to match along doors, drawer fronts, and carcass parts. The 600FT length noted in the SAP description supports extended runs, so a shop can edge multiple components in succession using the same lot for visual continuity. The manufacturer part number 327877-125 ties all of these attributes to a single identifier, which simplifies repeat ordering and maintaining consistent results on future projects that rely on this exact ABS edgebanding.
Rehau ABS edgebanding 327877-125 is listed as 15/16 x 1.2mm in the SAP description, giving an edge just under 1 inch wide with a 1.2mm thickness for a solid edge profile.
The 15/16 inch width provides slight overhang on many common panel thicknesses, so installers can trim back to a flush, consistent edge across cabinet and furniture components.
The 1.2mm thickness gives a substantial ABS layer, supporting a defined edge that tolerates trimming and light profiling while maintaining a uniform appearance along the panel edge.
The 600FT value in the SAP description indicates a 600-foot length, allowing shops to run multiple panels or full cabinet sets using the same continuous ABS edgebanding reference.
The manufacturer part number 327877-125 uniquely identifies this ABS edgebanding variant, so future orders can match earlier work and keep edge appearance consistent across jobs.
The C100364 EMX LAC reference in the SAP description marks a specific variant, helping shops align decor selection and maintain the same Rehau ABS edgebanding across multiple components.
Rehau ABS edgebanding 327877-125 pairs a 15/16 inch width with a 1.2mm thickness, giving installers a defined ABS edge layer suited to many panel-based projects. The 600FT length listed in the SAP description supports continuous production runs, so cabinets, fixtures, or furniture pieces can be processed with one consistent edge material. Using the manufacturer part number 327877-125 and the C100364 EMX LAC reference allows shops to align orders and repeat the same visual and dimensional setup on follow-up work. For panel edges requiring ABS edge banding from a defined Rehau, Inc. reference, this product provides a clear, repeatable option.
Sold In: 1 Roll