Rehau ABS edgebanding 327877-126 is an ABS edge banding designed to finish exposed panel edges in woodworking and casework. The product is identified as Rehau ABS Edgebanding, 327877-126, so every coil matches a known manufacturer part number for repeatable selection across projects. As an ABS edgebanding in the Edge Banding product class, it is suited to covering raw substrate edges so panels present a uniform finished edge instead of open core material. The SAP description lists 15/16X1.2MM ABS LE C600925 EMX LAC 600FT, which defines a 15/16 inch nominal width and 1.2mm thickness, giving enough coverage for common panel thicknesses while maintaining a manageable edge radius during trimming. The same description specifies a 600FT length, supporting longer runs of cabinets or casework without frequent roll changes on edgebanders.
The SAP description 15/16X1.2MM ABS LE C600925 EMX LAC 600FT indicates a continuous 600FT run of ABS edgebanding, which supports uninterrupted feeding through edgebanding equipment on production or larger custom jobs. The 15/16 inch width provides coverage across typical panel edges with a bit of overhang for trimming, helping installers achieve a flush final edge without exposing the substrate. The 1.2mm thickness creates a defined edge profile that can be machined and finished as part of standard edgebanding processes, providing a solid-feeling edge instead of a paper-thin treatment. Together, these dimensions support consistent setup of edgebanding equipment where the same size is run repeatedly across a project.
This product is listed in the Miscellaneous|Edgebanding category with a product class of Edge Banding, so it is intended for use on panel edges in woodworking applications such as cabinet components, casework sides, and shelves where a raw edge would otherwise be exposed. As an ABS Edgebanding from Rehau, Inc., it serves as a finishing layer over the substrate edge so the visible perimeter matches the face surface instead of showing core material. The size noted in the SAP description, 15/16X1.2MM, supports application on common panel thicknesses used in cabinetry, allowing a modest overhang for trimming while still leaving an appropriate reveal after machining. With a length specified as 600FT, it aligns with shop environments that run multiple parts in sequence, allowing an installer to handle numerous cabinet parts from a single coil length during edge banding operations.
The SAP description 15/16X1.2MM ABS LE C600925 EMX LAC 600FT identifies both width and thickness, and that dimensional clarity supports accurate machine setup and repeat jobs using stored edgebander programs. A 15/16 inch width gives consistent coverage across most panel edges, leaving enough excess to trim for a flush finish while still limiting waste, which is useful for predictable material usage over large production runs. The 1.2mm thickness balances a substantial edge presence with practical trimming and scraping, so the finished edge can be machined to a clean line without removing excessive material. Because this is specified as ABS edgebanding in the Edge Banding class, the material choice works within established ABS edge processing methods, letting shops use typical feed speeds, trimming tools, and scraping setups suitable for ABS without changing their general workflow.
Rehau ABS Edgebanding 327877-126 is listed as 15/16X1.2MM in the SAP description, giving a 15/16 inch nominal width and 1.2mm thickness for typical edge banding applications on panel edges.
Rehau ABS Edgebanding 327877-126 is specified as ABS in the SAP description, so it uses ABS material suited to machining, trimming, and standard ABS edgebanding processes on appropriate substrates.
The SAP description lists 600FT, indicating a 600-foot length that supports extended edge banding runs in shop environments before changing to another coil.
The 1.2mm thickness called out in the SAP description provides a defined edge profile that can be trimmed and scraped, giving a solid-feeling finished edge on cabinet and panel components.
The manufacturer part number 327877-126 uniquely identifies this Rehau ABS edgebanding, helping shops reorder the same size and type to match existing work or maintain standard tooling setups.
This product is categorized as Miscellaneous|Edgebanding with a product class of Edge Banding, indicating its role as a finishing edge on panels rather than a structural woodworking component.
Rehau ABS edgebanding 327877-126 provides a 15/16X1.2MM ABS strip in a 600FT length, pairing practical dimensions with a clearly defined manufacturer part number for consistent repeat use. For cabinet and panel projects that rely on ABS edgebanding in an Edge Banding product class, this Rehau, Inc. option delivers a known size and material profile that supports predictable setup and finished edges across multiple runs. Select this specific 327877-126 designation when a 15/16 inch by 1.2mm ABS edge is the required format for your woodworking or casework workflow.
Sold In: 1 Roll