Rehau ABS Edgebanding For Clean Panel Edges

Rehau ABS edgebanding gives you an ABS-based edge banding solution for covering raw panel edges, so cabinet and furniture projects gain a finished look and a defined edge profile. The 15/16 inch width covers typical panel thickness with a slight overhang, so trimming produces a flush, professional edge along cabinet sides, shelves, and doors. The 1.2mm thickness provides a substantial edge band in one pass, so the edge feels solid and consistent along the full run. The ABS material forms a uniform surface along the edge, so the transition from face material to edge is controlled for a clean visual line. The 327877-133 part number identifies this specific Rehau, Inc. ABS edgebanding variant, so repeat orders for matching work can track directly to the same material. The ABS LE C600934 EMX LAC designation further defines this exact version for consistent specification on jobs.

Key ABS Edge Banding Details For Projects

• The 15/16 inch nominal width spans standard panel edges with room for light trimming, so installers can route or trim back to a clean, flush line without exposing core material.
• The 1.2mm thickness gives a moderately thick ABS edge band, so the finished edge presents a purposeful profile that stands up to typical cabinet and furniture use.
• The ABS LE C600934 EMX LAC description specifies this exact formulation and look, so shops can align this edgebanding to project drawings and keep material consistent across multiple runs.
• The Rehau, Inc. branding ties this edgebanding to a defined manufacturer line, so purchasing and production teams can match it with other Rehau ABS edge banding in their system.
• The 327877-133 manufacturer part number provides a precise code for this edgebanding, so reordering and inventory records can track the same product over time.

Edgebanding Dimensions That Support Clean Installation

The 15/16 inch width on this Rehau ABS edge banding covers common casework panel thickness with a manageable amount of overhang, so edgebanders and handheld trimmers can cut back to a crisp edge without leaving gaps. The 1.2mm thickness produces a noticeable ABS edge in a single pass, so the installer does not rely on multiple layers to build up the edge profile. The ABS LE C600934 EMX LAC identification defines this version for consistent handling throughout production, so setups and edge profiles stay repeatable across cabinet runs. The ABS material presents a homogeneous strip along the panel edge, so trimming cutters engage a single material for predictable cutting behavior.

Using This ABS Edgebanding In Shop Workflows

Where This Rehau ABS Edgebanding Fits Best

This Rehau ABS edgebanding is designed as edge banding for panels that match the 15/16 inch coverage and 1.2mm thickness stated in the SAP description, so it suits cabinet and furniture parts built around that edge requirement. The edge banding category placement confirms its role as a finishing strip for exposed edges, so it is aligned with casework sides, shelves, and door edges where a finished ABS edge is specified. The ABS LE C600934 EMX LAC reference ties this strip to a defined appearance and configuration, so shops maintaining a standard material set can assign it to projects that call out that code. The 327877-133 manufacturer number connects directly to Rehau documentation, so engineers and buyers can reference that identifier when specifying material for repeat builds or coordinated product lines.

Why The Specific Size And Codes Matter In Use

The 15/16 inch by 1.2mm sizing on this ABS edge band provides clear setup dimensions, so edgebanders and trimmers can be adjusted around a known width and thickness for reliable results. The ABS designation identifies the base material, so cutting, trimming, and edge-finishing steps can be tuned to ABS behavior across multiple work cells. The ABS LE C600934 EMX LAC description groups the visual and material characteristics under a single reference, so quality checks and approvals can point back to one consistent edgebanding option across jobs. The 327877-133 part number serves as a precise ordering and stocking key, so shops running standard programs can call out this exact Rehau ABS edgebanding when matching previous projects or coordinating with drawings that specify this code.

Common Questions About Rehau 327877-133 Edgebanding

Select This ABS Edge Banding For Defined Edges

This Rehau ABS edgebanding, identified as 327877-133 with ABS LE C600934 EMX LAC, provides a 15/16 inch by 1.2mm edge band sized for typical panel work, so cabinet and furniture shops can specify, stock, and repeat the same edge detail across their projects.