Rehau ABS edgebanding 327877-140 is an ABS edge banding from Rehau, Inc. that covers and finishes exposed panel edges, so cabinet and furniture projects present a uniform look instead of raw core material. The ABS construction identified in the SAP description supports an edgebanding workflow focused on thermoplastic edges rather than veneer. The 15/16 inch width stated in the SAP description gives coverage across standard panel thicknesses with a bit of overhang to trim back, which helps achieve a flush, professional edge. The 1.2mm thickness in the SAP description provides a substantial edge profile that stands out more than thin tape, useful when matching surrounding components visually. The C100368 EMX LAC reference in the SAP description identifies a specific finish or design, allowing projects to stay consistent across multiple panels when the same number is used.
The SAP description specifies this Rehau ABS edgebanding at 15/16 inch wide, so the strip covers the panel face and leaves manageable overhang to trim during installation. The 1.2mm thickness identified in the SAP description provides a known edge height, which helps set trimmer and router setups when working across a run of panels. The SAP description lists a 600FT length, giving a continuous run that supports multiple cabinets or components without frequent roll changes. The ABS designation in the SAP description keeps the material type clear, so installers can align their equipment settings and handling to ABS rather than another edge material.
This product is classified by Wurth Baer Supply under Miscellaneous and Edgebanding, and by product class as Edge Banding, so it occupies the role of covering and refining exposed substrate edges in woodworking projects. The 15/16 inch width referenced in the SAP description positions it for use on panels where a near-1-inch strip is appropriate, such as cabinet sides, doors, and shelves that benefit from full coverage and trim space. The 1.2mm thickness in the SAP description supports applications where a thicker ABS edge is desired instead of a very thin tape-like product. The C100368 EMX LAC designation from the SAP description defines a particular look within Rehau ABS edgebanding, which helps keep a consistent appearance when this same code is specified throughout a project or across matching runs.
The manufacturer part number 327877-140 connects directly to the SAP description 15/16X1.2MM ABS LE C100368 EMX LAC 600FT, which gives installers a repeatable reference for material type, width, thickness, and design when planning edge work. Knowing the width is 15/16 inch lets shops set up edgebanders, trimmers, and inspection steps around that coverage, leading to predictable trimming margins across each panel. The defined 1.2mm thickness provides a consistent edge dimension that can align with tooling geometry and panel layout details on drawings. The ABS identification in the SAP description signals that the material behaves as an ABS thermoplastic during normal edgebanding processes, so handling, forming, and edge finishing can be aligned to that material family on every job using this product.
Rehau ABS edgebanding 327877-140 is identified in the SAP description as ABS LE, so it uses ABS thermoplastic, which supports workflows designed around ABS edge processing.
Rehau ABS edgebanding 327877-140 is listed in the SAP description at 15/16 inch wide, giving edge coverage with extra material to trim back for a flush finish on panels.
This edge banding is described in the SAP text as 1.2mm thick, providing a defined edge profile that can coordinate with other 1.2mm components in a project.
The SAP description lists C100368 EMX LAC, identifying a specific appearance for this Rehau ABS edgebanding so projects using this code maintain a consistent visual match.
The SAP description specifies 600FT, so this Rehau ABS edgebanding provides a 600-foot length suitable for runs of cabinets or repeated panel edging.
The manufacturer part number 327877-140 links directly to the exact ABS material, dimensions, and C100368 EMX LAC design, helping repeat the same edgebanding choice on future jobs.
Rehau ABS edgebanding 327877-140 from Wurth Baer Supply combines a 15/16 inch width, 1.2mm thickness, and ABS construction as stated in the SAP description, giving a defined option for edge work. The C100368 EMX LAC designation and 600FT length in the SAP description provide a consistent appearance and extended run capacity for cabinetry or woodworking projects that depend on uniform edges. When this specific look, width, and thickness align with your drawings and preferred ABS workflow, this part number offers a clear, repeatable choice.
Sold In: 1 Roll