Rehau ABS edgebanding 327877-141 is an ABS edge banding from Rehau, Inc. that covers and protects raw panel edges, so exposed board edges transition to a finished surface in one step. The 15/16-inch width stated in the SAP description as 15/16X1.2MM helps span typical panel thickness with room to trim, so the banding can be flush-routed without exposing the substrate. The 1.2mm thickness described in the same code 15/16X1.2MM provides a solid edge profile, so edges resist everyday knocks better than a paper-thin edging. The ABS material identified in the product name supports a consistent machined cut, so trimming and scraping produce a clean line along cabinet and furniture edges. The Rehau brand noted in the product data ties this roll to a recognized ABS edgebanding line, so shops can match it with existing Rehau-based layouts and part numbers.
The 15/16X1.2MM notation in the SAP description identifies this Rehau ABS edge banding as roughly 15/16 inch wide and 1.2mm thick, so operators can dial in bander pressure settings and trimming depth around those edge dimensions. The 600FT reference in the same description defines the roll length, so shops can plan production sequences and staging knowing how much continuous edging is available before a changeover. The manufacturer part number 327877-141 links directly to this specific size and ABS configuration, so reorder entries and machine labeling can stay consistent from project to project. The category listing as Edgebanding and Product Class Edge Banding ties this part specifically to edge finishing tasks, so it fits straight into existing edgebanding stock locations and job costing.
The category entry Miscellaneous|Edgebanding and the Product Class Edge Banding show that Rehau ABS Edgebanding, 327877-141 is intended for edging tasks on panel-based components, so it suits cabinets, furniture carcasses, and similar board constructions that need covered edges. The ABS material referenced in the product name supports routing, scraping, and light sanding around standard woodworking operations, so shops can treat this edging like other ABS-based solutions already on their edgebanders. The 15/16X1.2MM sizing from the SAP description positions this banding for panels where a 15/16-inch strip will overhang slightly on both faces, so both sides can be trimmed flush without leaving a gap or short edge. The 600FT length noted in the same description gives production teams a continuous supply, so they can edge multiple cabinet runs or a full furniture batch with fewer material interruptions and simplified staging along the line.
The combination of 15/16X1.2MM and ABS in the SAP Description 15/16X1.2MM ABS LE C200831 EMX LAC 600FT ties material type and size together, so operators can standardize on one set of feed speeds, heat profiles, and trimming passes that match this specific edging. The manufacturer part number 327877-141 provides a single reference for purchasing, inventory labeling, and machine program naming, so each time this number appears on a work order it points back to the same Rehau ABS edge banding. The Web Description WBSC - 1432 - RU327877-141 ties the Wurth Baer Supply internal reference to the same Rehau part, so buyers can connect supplier documentation and internal lists to this identical material. The Rehau, Inc. brand association means this ABS edgebanding belongs to a defined manufacturer range, so shops that standardize on Rehau codes can align color, finish, and performance expectations across jobs when they specify 327877-141.
Rehau ABS Edgebanding, 327877-141 is an ABS edge banding classified under Edgebanding and Edge Banding, so it is used to finish and protect raw panel edges in woodworking projects.
The 15/16X1.2MM in the SAP description indicates a 15/16-inch wide, 1.2mm thick ABS strip, so installers can size setup, trimming depth, and panel overhangs around those edge dimensions.
The SAP description specifies 600FT, so this Rehau ABS edgebanding 327877-141 provides a 600-foot length for extended cabinet, furniture, or millwork edging runs without frequent roll changes.
The product name and SAP description identify this as ABS edgebanding, so it is made from ABS thermoplastic that responds well to standard edge banding, routing, and scraping operations.
The manufacturer part number 327877-141 uniquely identifies this Rehau ABS edge banding size and configuration, so purchasing, inventory, and machine programs consistently point to the same edging.
Rehau ABS Edgebanding, 327877-141 is listed as Edgebanding and Edge Banding, so it slots directly into panel-edge finishing steps for cabinets and furniture panels during routine shop production.
Rehau ABS edgebanding 327877-141 combines ABS material, a 15/16-inch by 1.2mm profile, and a 600FT length as outlined in the SAP description, so it aligns closely with edge banding demands on cabinet and furniture jobs. The clear manufacturer part number 327877-141 and its listing under Edgebanding and Edge Banding mean this roll ties cleanly into ordering, stocking, and machine setup routines without guesswork. For shops standardizing on specific Rehau, Inc. ABS edge banding codes, adding this 327877-141 variant into regular stock keeps panel edge finishing consistent from one project release to the next.
Sold In: 1 Roll