Rehau ABS edgebanding 327877-144 15/16 x 1.2mm

Rehau ABS Edgebanding 327877-144 For Clean Edges

Rehau ABS edgebanding 327877-144 is an ABS edge banding designed to finish exposed panel edges with a consistent, manufactured look. The ABS material, called out in the SAP description, provides a uniform synthetic edge that visually matches engineered panels in modern woodworking projects. The 15/16 inch nominal width from the 15/16X1.2MM dimension covers standard panel thickness while giving a small tolerance for flush trimming along cabinet and furniture parts. The 1.2mm thickness in the same dimension line gives a solid edge profile that can be machined without feeling overly thin in handling or during finishing steps. The LE C100350 EMX LAC identification in the SAP description ties this edgebanding to a specific color and surface code, supporting repeatable appearance across multiple jobs and reorders. The 600FT length described in the SAP text supports longer production runs or multiple smaller projects with one continuous roll.

Key Rehau ABS Edgebanding Details For Jobs

• The SAP description 15/16X1.2MM ABS LE C100350 EMX LAC defines the edgebanding as ABS material in a specific coded finish, so installers can match this exact appearance across cabinets, casework, or replacement work where color consistency matters.
• The 15/16 inch width in the SAP description gives coverage for typical panel thicknesses used in woodworking, allowing slight overhang for trimming so finished edges align cleanly with the panel faces after machining.
• The 1.2mm thickness, also specified in the SAP description, provides a more substantial edge than ultra-thin tape, which supports cleaner milling at corners and reduces the risk of a fragile feeling edge when parts are handled.
• The 600FT length noted in the SAP description gives a long continuous run of edgebanding, which helps maintain a consistent look on multiple doors, drawer fronts, or long cabinet runs without frequent material changes.
• The manufacturer part number 327877-144 uniquely identifies this Rehau ABS edgebanding, so shops can reorder the same product and keep finish and sizing consistent from job to job and between different production batches.

Installation Fit Based On Size And Material

The ABS material called out in the SAP description works as a synthetic edgebanding, so it behaves predictably under typical machining used in woodworking shops. The 15/16 inch width in the 15/16X1.2MM reference allows the strip to overhang both sides of common panel thicknesses, which supports standard trimming operations to bring the edge perfectly flush. The 1.2mm thickness noted in the same description provides enough material at the edge for clean scraping or routing without cutting through, which helps maintain a finished look at corners and radius details. The defined LE C100350 EMX LAC finish coding keeps the surface appearance consistent along the full 600FT length, which supports uniform results across all panels using the same roll in a production run.

How This ABS Edge Banding Works In Practice

Where Rehau ABS Edgebanding 327877-144 Fits

This Rehau ABS edgebanding, identified as product name Rehau ABS Edgebanding, 327877-144, belongs to the Edge Banding product class and the Edgebanding category, so it is intended for finishing edges on panel-based woodworking components. The ABS designation in the SAP description defines it as a plastic edgeband suited to engineered wood or similar substrates in cabinets, furniture, and casework. The 15/16X1.2MM dimension in the SAP text points to use on panels whose thickness can be fully covered by 15/16 inch width, letting installers trim back to a smooth, co-planar surface. The LE C100350 EMX LAC coding in the SAP description connects this roll to a specific look, which is important when panel faces are coordinated to matching edgebanding. The 600FT length referenced in the SAP description supports higher piece counts on a single job, such as multiple cabinet doors, drawer fronts, or shelf edges made from the same core material.

Details That Support Consistent Installation Results

The combination of 15/16 inch width and 1.2mm thickness in the 15/16X1.2MM SAP description gives installers a workable balance between coverage and machinability, so trimmed edges line up square without feeling overly bulky. The ABS material specified in the description allows the banding to respond in a controlled way to cutting, routing, or scraping processes commonly used after bonding, which supports a predictable workflow on edge-banding machines or manual setups. The defined LE C100350 EMX LAC surface code in the SAP description provides a consistent finish from one end of the 600FT roll to the other, which helps avoid visible variation across banks of cabinets or repeated parts. The manufacturer part number 327877-144 and the web description WBSC - 1432 - RU327877-144 together create a clear product identity, which streamlines ordering and stocking so shops can repeatedly draw the same material into production.

Common Questions About Rehau ABS Edge Banding

Select Rehau ABS Edgebanding 327877-144 For Panels

Rehau ABS edgebanding 327877-144 combines ABS material with a 15/16X1.2MM profile and a defined LE C100350 EMX LAC finish, so it supports consistent edge finishing on panel-based projects. The 600FT length called out in the SAP description suits production runs or multiple builds from one roll. With a clear manufacturer part number 327877-144 and its classification as Edge Banding in the Edgebanding category, this product aligns well with shops that want repeatable sizing and appearance on cabinet and furniture edges.