Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding 327877-147 is ABS edge banding from Rehau, Inc. that covers and finishes exposed panel edges, so cabinet and furniture projects gain a clean, unified look around visible sides. The SAP description identifies this material as 15/16 x 1.2mm ABS, giving you a practical width that works well on common 3/4 inch panels while the 1.2mm thickness builds a defined edge profile suitable for many shop applications. The LE C600899 EMX LAC designation ties this edgebanding to a specific laminate-related reference, helping align edge material with the intended decorative surface on your panels for consistent appearance. The 600FT notation in the SAP description signals a long-run length that supports larger jobs or repeat work on the same finish without frequent changeover, which helps keep production more consistent from one batch to the next.
The SAP description defines this Rehau ABS edgebanding as 15/16 x 1.2mm, giving installers a band slightly wider than a 3/4 inch panel edge, which leaves material to trim for a crisp line. The 1.2mm thickness gives edge banding equipment enough material to heat, press, and trim cleanly without feeling overly bulky at the front face. The ABS composition called out in the description works with standard edgebanding machinery set up for ABS, so feed, temperature, and trimming setups can be tuned around a consistent, known material type across similar Rehau products.
This Rehau ABS edgebanding, identified as product 327877-147 and classified as Edge Banding in the Edgebanding category, is suited to projects where exposed sheet edges need a finished band that matches a laminate-oriented system. The 15/16 inch width described in the SAP data aligns well with casework built from nominal 3/4 inch substrate, so shelf fronts, cabinet sides, and door edges can be covered in one pass with trimming margin. As an ABS edge banding product from Rehau, Inc., it fits into woodworking shops that already run ABS on edgebanders, letting them align this specific code with other Rehau materials for repeatable shop standards.
The 15/16 x 1.2mm sizing described in the SAP description gives fabricators predictable geometry, which helps standardize edgebander setup and trimming passes across jobs using this same Rehau ABS edgebanding 327877-147. The 1.2mm thickness offers enough body for consistent pressure from edgebanding rollers and trimming tools, supporting a square feel on door and panel fronts after processing. The LE C600899 EMX LAC designation ties this edge to a defined reference point in your material list, simplifying re-ordering and enabling shops to build documentation and cut lists around a stable, named edge material. The 600FT run length noted in the description favors batch work, where running long stretches of identical ABS edgebanding reduces downtime and promotes visual continuity across an entire room of cabinets or fixtures.
Rehau 327877-147 is ABS edge banding from Rehau, Inc., so it serves as a finishing strip for exposed panel edges in cabinetry and similar woodworking projects.
This edgebanding is described as 15/16 x 1.2mm, providing a band slightly wider than typical 3/4 inch panels with a 1.2mm edge thickness for trimming and profiling.
The 15/16 inch width gives extra material beyond the panel edge, so after bonding you can trim back to a clean, flush edge without exposing the substrate beneath.
The 1.2mm thickness offers enough body for edgebanding machinery to heat and trim cleanly, helping create a defined, solid-feeling edge on doors and panels.
The LE C600899 EMX LAC code ties the edgebanding to a specific reference, supporting color and system alignment with related laminate or panel materials in your project.
The 600FT length described in the SAP data supports extended runs of the same edge material, limiting changeovers and promoting consistent appearance across many panels.
This Rehau ABS edgebanding 327877-147 pairs a 15/16 x 1.2mm profile with ABS construction and a defined LE C600899 EMX LAC reference, giving shops a traceable, repeatable edge material. For cabinet, furniture, or fixture work built around laminate-style systems, this edge banding offers dimensions and length that support steady production and consistent visible edges from one project to the next.
Sold In: 1 Roll