Rehau ABS edgebanding 340984-003 is an ABS edge banding designed for finishing exposed panel edges in woodworking projects. The SAP description 43X1MM ABS CP20940 EMB LAC 600FT identifies this product as a 43 mm wide, 1 mm thick ABS edgeband with CP20940 reference and an EMB LAC finish over a 600 ft length, so it suits longer cabinet or casework runs where consistent appearance and dimensions are important from piece to piece.
The Rehau, Inc. brand and edge banding product class place this item in a professional edgebanding line, so it fits cabinet shops, millwork operations, and serious DIY users that need a defined 43 mm by 1 mm profile. As part of the Edgebanding category, this ABS strip serves to cover and protect raw panel edges during construction, giving a finished look while maintaining a predictable thickness that supports flush trimming and alignment across doors, drawer fronts, and carcass edges.
The 43 mm width defined in the SAP description supports edging panels where the finished edge needs a wider band, such as thicker cabinet doors or carcass sides, allowing trimming for a flush, square edge along the face. The 1 mm thickness noted in 43X1MM provides a stable edge profile that can be milled and flushed with standard edgebanding trimmers, helping the band sit solidly against the substrate without a fragile feather edge.
Because the roll length is specified as 600 ft, longer production runs can be handled from a single coil, which reduces mid-job changeovers and helps keep color and finish uniform across multiple parts. As ABS edgebanding in the Edgebanding category, this product fits into typical edge banding workflows where a defined width and thickness are needed for repeatable results on cabinet, furniture, or fixture projects.
The Rehau ABS edgebanding, 340984-003, belongs to the Edge Banding product class, so it is intended for covering exposed edges on panel-based components in cabinet, furniture, and general woodworking applications. The 43 mm width stated in the SAP description suits panels where the edge build-up or design calls for a broader band, supporting use on thicker doors, gables, or vertical partitions that need material beyond standard narrow tape.
The 1 mm thickness described in 43X1MM gives a substantial layer of ABS at the edge, which supports machining, light profiling, and flush trimming as part of standard edgebanding operations, without drastically changing the overall panel dimension. As part of the Edgebanding category, this roll is designed to convert raw substrate edges into finished edges that visually align with the rest of the surface material, helping maintain a consistent look across casework components.
The ABS designation in the SAP description identifies the material as ABS plastic, positioning it within ABS-friendly processes commonly used in woodworking shops, such as edge banding machines or manual edge application systems that accommodate ABS strips. The CP20940 code present in the product description ties this roll to a specific Rehau identification, helping align it with jobs where CP20940 is specified as the required edgebanding reference.
The clearly defined 43 mm width means each cut length of this Rehau ABS edgebanding sits with predictable overhang on typical panel thicknesses, which simplifies setup for trimming tools and helps maintain straight, even reveals along door and cabinet edges. The 1 mm thickness gives a uniform build at the edge, so once trimmed, the transition from substrate to band stays consistent from part to part, minimizing visual variation across doors, drawer fronts, and cases.
The 600 ft length described in the SAP data allows multiple cabinets or a full project run to be processed from the same roll, which supports color and finish continuity across the installation. The EMB LAC reference in the SAP description marks a specific finish variant within the Rehau ABS line, so using this exact 340984-003 part number helps maintain the same surface character on every edged component within a job that calls for that designation.
The manufacturer part number 340984-003 ties directly to Rehau, Inc. cataloging, giving shops a precise identifier when aligning purchasing, inventory, and production documents. Being categorized by Wurth Baer Supply as Edgebanding under Miscellaneous|Edgebanding places this product within a recognized supply stream for woodworking operations that use defined ABS edgebanding sizes as recurring materials.
The Rehau 340984-003 ABS edgebanding is identified as 43X1MM in the SAP description, meaning it is 43 mm wide and 1 mm thick, supporting edging on thicker panels needing a broader band.
The SAP description lists this Rehau ABS edge banding as 600FT, so the roll provides 600 feet of material, supporting extended cabinet or fixture runs from a single coil.
The SAP description states ABS, so this edgeband is made from ABS plastic, aligning with common ABS edgebanding processes used in woodworking shops.
The CP20940 code in the SAP description identifies a specific Rehau designation for this ABS edgebanding, helping match it to projects or materials that call for the same CP20940 reference.
The 1 mm thickness stated in 43X1MM provides a solid edge profile that supports trimming and light profiling while keeping overall panel dimensions predictable after edging.
The 43 mm width defined in the SAP description suits edging thicker doors, gables, or partitions where a wider band is needed to cover the edge and allow trimming for a clean finish.
The Rehau ABS edgebanding, 340984-003, delivers a defined 43 mm width, 1 mm thickness, and 600 ft length, so it supports cabinet and woodworking projects that need consistent ABS edges across multiple components. The CP20940 and EMB LAC identifiers position this roll for jobs calling for that specific Rehau designation, helping align shop material selection with documented requirements. For projects built around ABS edge banding dimensions and finish codes, this Rehau, Inc. 340984-003 roll from Wurth Baer Supply provides a clearly specified option.
Sold In: 1 Roll