Rehau ABS edgebanding 340984-020 is an ABS edge banding from Rehau, Inc. that finishes exposed edges on panels so they present a consistent, professional surface around cabinet and furniture components. The 43x1mm ABS dimension in the SAP description 43X1MM ABS CP41527 EMB DECOGLS 600FT identifies this as a 43 mm wide, 1 mm thick ABS strip, so it covers common panel thicknesses while giving a solid edge profile that matches the face material. The ABS material called out in the description provides a uniform man-made edge, which supports machining, trimming, and handling in typical woodworking shop workflows. The reference to EMB DECOGLS in the SAP description indicates an embossed decorative gloss style, so the edging delivers a textured, decorative look that visually ties into corresponding decorative surfaces on cabinet or fixture runs.
The SAP description 43X1MM ABS CP41527 EMB DECOGLS 600FT identifies this Rehau ABS edgebanding as 43 mm wide and 1 mm thick, so it is sized for straightforward feed through standard edge banding machines that accept 43 mm stock. The ABS material noted in the description provides a uniform, man-made substrate that works with common edgebanding application methods used in woodworking shops. The 600FT reference defines an extended length format, supporting longer machine runs where consistent feed of the same edging profile is important for keeping edges uniform across cabinets, casework, and fixtures in the same project.
The Category listing Miscellaneous|Edgebanding and Product Class Edge Banding identify this Rehau 340984-020 product as a dedicated edging solution for covering raw panel edges in cabinet, furniture, and casework work. The 43 mm width noted in 43X1MM ABS spans the full edge face on typical panel constructions, allowing fabricators to center the material during application so trimming produces a clean, even reveal on both faces. The 1 mm thickness specified in the SAP description creates a substantial edge layer, giving the finished part a defined profile that pairs visually with laminated or decorative gloss surfaces. The EMB DECOGLS notation signals an embossed decorative gloss character, so when this edging is applied to door and drawer front edges, it visually ties into decorative gloss designs for a coordinated run of components.
The ABS construction described in 43X1MM ABS CP41527 EMB DECOGLS 600FT provides a homogeneous plastic edge, so shops can process it using standard trimming, flushing, and scraping steps without shifting away from typical ABS edgebanding workflows. The long 600FT length stated in the SAP description supports batch production where multiple cabinets or fixture sections use the same decorative edge, allowing continuous machine setup for repeated panels. With Manufacturer Part # 340984-020 and Web Description WBSC - 1432 - RU340984-020, shops can reference a specific, repeatable edging when reordering for future runs, keeping edge appearance consistent across projects and service replacements.
The 43 mm width indicated in 43X1MM ABS gives operators enough coverage over standard panel edges so slight panel thickness variations still trim back to a flush, straight edge, reducing rework on visible cabinet faces. The 1 mm thickness defined in the same description helps maintain a stable band during feeding and trimming, which supports smooth machine operation and consistent edge quality when running long sequences of parts. The ABS material reference in the SAP description means the edge banding maintains predictable behavior under shop conditions, supporting uniform trimming pressures and scraper settings from piece to piece.
The EMB DECOGLS detail in the SAP description points to an embossed decorative gloss style, which keeps the edge appearance in line with decorative gloss surfaces throughout a project, aiding installers who are matching replacement fronts or extending existing runs. The 600FT run length called out in the description reduces the number of roll changes during production, so once a machine is dialed in for this 340984-020 profile, that setup can carry across many parts for consistent results. The clear Manufacturer Part # 340984-020 designation and Brand Rehau, Inc. allow project documents and shop lists to call out this exact edging, supporting accurate repeat orders whenever additional components or matching replacements are required.
Rehau 340984-020 is an ABS edge banding classified under Edge Banding, so it is used to cover exposed panel edges on cabinets, furniture, and similar casework projects.
The 43X1MM in the SAP description indicates 43 mm width and 1 mm thickness, so the edging spans typical panel edges and provides a solid profile for trimming.
The EMB DECOGLS notation in the SAP description indicates an embossed decorative gloss style, so the edge presents a decorative, gloss-oriented look on finished parts.
The ABS material called out in 43X1MM ABS creates a uniform plastic edge, so it supports consistent cutting, trimming, and scraping during cabinet and furniture production.
The 600FT reference in the SAP description identifies an extended length, so shops can run longer edgebanding sequences on multiple panels with one continuous supply.
This edging is identified by Manufacturer Part # 340984-020 and Web Description WBSC - 1432 - RU340984-020, so project records can specify the exact same product.
Rehau ABS edgebanding 340984-020, as described by 43X1MM ABS CP41527 EMB DECOGLS 600FT, provides a defined 43 mm by 1 mm ABS profile in an embossed decorative gloss style, giving shops a repeatable edging solution for coordinated cabinet and casework runs.
Sold In: 1 Roll