Rehau ABS edgebanding 340984-022 is an ABS edge banding designed to finish exposed panel edges with a consistent, factory-style look. The 43X1MM dimension sets the strip width and thickness, so it covers standard panel edges while adding a defined edge profile that is straightforward to trim flush.
The ABS material provides a stable plastic edge, so cut panels gain a uniform, impact-resistant perimeter that holds up through normal shop handling and installation. The CP41526 reference ties this banding to a specific color or design family, so matching runs across multiple panels stay visually consistent from piece to piece.
The EMB DECOGLS designation identifies this as a decorative gloss style, so the finished edge presents a reflective surface that aligns with high-sheen panel faces in coordinated layouts. The 600FT reference indicates an extended run length, so longer production jobs can be handled with fewer roll changes and less downtime.
The 43X1MM sizing defines both the working width across the panel edge and the thickness of Rehau ABS edgebanding 340984-022, so edge banders and trimmers can be tuned to these dimensions and run repeatedly without chasing inconsistent material size. The ABS edge banding format allows users to apply the strip continuously along straight panel edges, then trim back the 1MM thickness for a clean shoulder that transitions from face to edge.
The decorative gloss EMB DECOGLS surface provides a smooth, high-sheen face across the banding, so cutters and scrapers can be set to protect that finish while still removing minimal overhang. With a 600FT reference length in a single run, setup time can be spread across many parts as the same parameters carry through a full production sequence.
Rehau ABS edge banding in the 43X1MM size is suited to panels whose edge width aligns with that dimension, so casework, cabinetry, or shelving that share similar thicknesses can be processed on the same settings. The ABS material pairs with projects that already specify ABS edgebanding, so the finished edge matches the plastic profile expected in those assemblies.
The CP41526 design reference and EMB DECOGLS decorative gloss surface guide this edgebanding toward applications that use coordinated, glossy finishes, so visible cabinet sides, doors, or partitions can present a unified reflective edge. On multi-cabinet installations, the 600FT run length allows repeated use across many parts, so color and gloss remain constant from one component to the next throughout the job.
The defined 43X1MM dimension on Rehau ABS edgebanding 340984-022 means feed wheels, pressure settings, and trim heads can be aligned to a known thickness and width, so once dialed in, they deliver consistent edges without frequent measurement adjustments between parts. The ABS composition supports uniform cutting and scraping behavior, so trimming back the 1MM thickness yields a predictable edge radius or sharp line, depending on how knives or scrapers are profiled.
The EMB DECOGLS gloss decorative surface encourages careful finish protection during trimming, so operators can balance cut depth and feed rate to keep the reflective face intact while removing overhang. Because the 600FT reference points to an extended length, these dialed-in settings can stay in place over long production runs, so every cabinet or panel in that series carries the same CP41526 gloss appearance and edge geometry.
Rehau ABS edgebanding 340984-022 uses a 43X1MM size, which indicates the working width and thickness, so edge banders and trimmers can be set precisely for that profile.
The ABS material on this edge banding provides a stable thermoplastic edge, so panels gain a consistent, impact-resistant perimeter during cabinet or casework fabrication.
The CP41526 reference on Rehau ABS edge banding links the strip to a specific design family, so matching panels and future jobs can specify the same appearance code.
The EMB DECOGLS decorative gloss finish creates a reflective surface, so the edge visually aligns with high-gloss panels and maintains a continuous sheen along cabinet edges.
The 600FT reference length indicates extended material for longer runs, so multiple cabinets or panels can be processed from a single roll with consistent color and gloss.
Rehau ABS edgebanding 340984-022 has fixed 43X1MM dimensions, so edge banders can be calibrated once and used across many parts without changing size parameters.
Rehau ABS edgebanding 340984-022 combines a defined 43X1MM profile, ABS material, CP41526 design reference, and EMB DECOGLS decorative gloss finish, so edge work on matching panels stays consistent. The 600FT length supports extended cabinet and casework runs where a uniform ABS edge and coordinated gloss appearance are required across many parts.
Sold In: 1 Roll