Rehau ABS edgebanding 340984-024 is an ABS edge banding designed for finishing exposed panel edges, so cabinet and furniture projects get a consistent, protected edge surface. The product description "43X1MM ABS CP41531 EMB DECOGLS 600FT" establishes that this is a 43mm wide, 1mm thick ABS strip, giving a substantial edge profile that stands up well in everyday use. The 43mm width suits thicker panels or overhanging designs where a wider edge is needed, keeping visual lines straight along doors, gables, or shelving. The 1mm thickness provides a more solid edge feel than thin tape, which helps panels look finished rather than raw. The ABS material defines it as a thermoplastic edging commonly used in cabinet and woodworking environments, providing a practical balance between workability and performance when edging man-made panels.
The notation "43X1MM" in the description defines the edgeband as 43mm wide and 1mm thick, so installers can set up edgebanding equipment to match those dimensions and keep feed, trimming, and flush routing accurate. The "ABS" material callout means the banding is part of the ABS edgeband family from Rehau, aligning with common shop workflows for machining panel edges. The term "EMB DECOGLS" describes an embossed decorative gloss surface, allowing edge finishes to visually align with higher-sheen decorative panels where gloss continuity is part of the design intent. The 600FT detail identifies a continuous length that supports running multiple cabinet or fixture parts from the same roll, which helps maintain visual uniformity from one component to the next.
This Rehau, Inc. product is classified as edge banding in the edgebanding category, so its primary role is finishing exposed panel edges in cabinetry, fixtures, and similar casework. The 43mm width lets it cover edges on thicker boards or stepped designs where a narrow strip might leave lines or substrate showing, which supports more demanding layout requirements on custom projects. With a 1mm thickness identified in the "43X1MM" description, the edgeband forms a noticeable, solid edge rather than a film-like layer, which gives doors, drawer fronts, and side panels a more substantial finished feel. As an ABS edgebanding, it is suited to standard ABS edging workflows, so shops using typical panel edgebanders or manual trimmers can integrate it into existing processes without unusual handling steps. The embossed decorative gloss surface description means this banding works well where the edge needs both texture and gloss, helping panels read as a continuous decorative surface at the front and sides.
The combination of 43mm width and 1mm thickness gives installers clear dimensional targets, which simplifies machine setup and helps reduce rework from misaligned trimming or insufficient coverage. The ABS material specification keeps the product within a familiar performance range for cutting, trimming, and corner detailing, helping edges stay clean through standard shop operations. The "EMB DECOGLS" surface description tells fabricators they are working with an embossed decorative gloss finish, so they can orient parts and layout sequences to present consistent sheen across multiple cabinets or fixtures. The 600FT length detail supports running larger batches from a single roll, which reduces edge-to-edge variation from roll changes and helps maintain a uniform appearance across an entire installation. The manufacturer part number 340984-024 ties these attributes to a specific Rehau ABS edgebanding, supporting repeat ordering when a project standard is established.
Rehau ABS edgebanding 340984-024 is described as 43X1MM, meaning it is 43mm wide and 1mm thick, so equipment can be set for that width and thickness during edging operations.
The description EMB DECOGLS indicates an embossed decorative gloss surface, so the edging provides a textured, glossy appearance that aligns with decorative panel designs needing a higher-sheen edge.
The 600FT length provides a long continuous run of Rehau ABS edge banding, supporting large cabinet or fixture projects where consistent color and finish are needed across many parts.
The 340984-024 edge banding is described as ABS, placing it in the ABS thermoplastic family commonly used for edgebanding in cabinet and woodworking applications.
The specified 1mm thickness gives the edging a more substantial profile than very thin tape, providing a solid-feeling edge that suits cabinet fronts and exposed panel edges.
This ABS edgebanding with manufacturer part number 340984-024 is from Rehau, Inc., aligning it with Rehau's edge banding product family.
Choose Rehau ABS edgebanding 340984-024 when a 43mm wide, 1mm thick ABS edge banding with an embossed decorative gloss surface aligns with the panel design and edging workflow. The defined dimensions, ABS material, and long 600FT length support consistent edging across cabinets, fixtures, or furniture projects that rely on coordinated surface appearance and solid-feeling edges.
Sold In: 1 Roll