Rehau ABS edgebanding identifies this product as ABS edge banding from Rehau, Inc., which provides a dedicated solution for finishing exposed panel edges where a consistent material is preferred. The 43X1MM ABS detail in the SAP description indicates a 43 mm wide, 1 mm thick strip, giving installers a clear sense of coverage across typical panel thicknesses. This width allows a margin for trimming flush after bonding, which supports a clean, square edge on casework and components. The ABS material designation describes a thermoplastic band, which is often used in woodworking environments where a stable synthetic edge is required. The CP60627 reference in the SAP description points to a specific pattern or color code from Rehau, so projects using that design can match edges to the corresponding surface. The DECOGLS notation signals a decorative gloss appearance, aligning edge sheen with high-gloss faces on panels.
The 43X1MM sizing in the SAP description indicates that this Rehau ABS edgebanding is cut to 43 mm wide at 1 mm thickness, which matters when aligning banding to panel thicknesses and planning trim allowances at the router or trimmer. That width provides extra reveal beyond many common board thicknesses, which gives room to correct minor alignment shifts during application while still achieving a flush finish. The 1 mm thickness offers a defined edge presence compared to thinner tapes, influencing the visual transition between face and edge on the finished part. Because the SAP description notes a 600FT length, installers can plan continuous runs on larger jobs, reducing changeovers during edging operations and helping maintain consistent appearance across all related components.
The product name "Rehau ABS Edgebanding, 340984-025" and the SAP description "43X1MM ABS CP60627 EMB DECOGLS 600FT" position this item as edge banding for woodworking or casework components that require a defined Rehau color or design code. The ABS material reference suits projects where an ABS-based edge is already specified, such as cabinet carcasses, shelving, or furniture components that need a matching synthetic edge profile. The CP60627 identifier connects this edgebanding to a particular decorative design family from Rehau, so any job that calls out that code on drawings or cut sheets can use this part to align exposed edges with the chosen surface pattern. The DECOGLS notation indicates a decorative gloss appearance, which ties this edge solution to high-gloss or similarly reflective surfaces where a coordinated sheen across faces and edges supports a uniform finished look along cabinet doors, end panels, or work surfaces.
The 43X1MM dimension in the SAP description directly supports repeatable edging results by giving a defined 43 mm coverage band at 1 mm thickness, so operators can set up trimmers and edgebanders to a known profile. That dimension helps determine overhang allowances and trimming paths, contributing to consistent reveals and square edges across multiple parts in a batch. The specified 600FT length helps maintain continuity of color and gloss level from the same run of material, which is valuable when numerous doors, drawer fronts, or panels are fabricated under the same Rehau CP60627 scheme. The ABS material callout means that this edgebanding aligns with processes already tuned for ABS edges, so heat, pressure, and trimming practices developed around ABS substrates can carry over to this part number for predictable performance. By tying the CP60627 EMB DECOGLS code and the manufacturer part number 340984-025 together, the product allows purchasing and shop staff to reference a single identifier from ordering through fabrication, helping reduce mix-ups between different designs.
Rehau ABS edgebanding listed as 43X1MM is 43 mm wide and 1 mm thick, giving coverage across typical panel edges with enough material for trimming to a flush, defined profile.
Rehau ABS edgebanding with SAP description 43X1MM ABS CP60627 EMB DECOGLS 600FT provides a 600-foot length, supporting multiple components or larger projects from the same continuous run.
This product is identified as ABS in the SAP description, meaning the edgebanding uses an ABS substrate suited to workflows already set up around ABS edge materials.
The CP60627 EMB DECOGLS notation identifies a specific decorative gloss design code from Rehau, allowing edges to follow the same pattern and sheen as matching surfaces.
The 1 mm thickness stated in 43X1MM provides a more substantial edge line than thinner tapes, influencing the visual transition between panel face and edge on cabinets or furniture.
Manufacturer part number 340984-025 ties directly to this 43X1MM ABS CP60627 EMB DECOGLS 600FT edgebanding, helping purchasing and shop staff consistently source the same design.
The SAP description "43X1MM ABS CP60627 EMB DECOGLS 600FT" and the Rehau part number 340984-025 define a specific ABS edgebanding solution for projects calling out the CP60627 decorative gloss design. When the drawings, cut lists, or design standards specify this Rehau code, choosing this 43 mm by 1 mm banding aligns color, gloss, and edge profile with the intended look across cabinets, shelving, or furniture components. Using a single, clearly identified Rehau ABS edgebanding for all exposed edges under that scheme supports visual consistency and streamlined planning from order through final installation.
Sold In: 1 Roll