Rehau ABS edgebanding provides a dedicated edge solution for panels where a consistent ABS edge is required, giving casework and components a unified finished look along visible edges on cabinets, fixtures, and other millwork runs.
The 43x1mm ABS format defines both the width and thickness of this edge banding, so it matches panel edges built around that size, helping installers keep reveals, overhangs, and flush trims predictable from part to part.
The manufacturer part number 361984-006 ties this ABS edgebanding to a specific color and finish combination, supporting repeat projects where the same appearance is needed across multiple jobs, repairs, or later additions.
The C600902 designation further identifies the exact decor within the Rehau system, so shops can order this banding against panel or door programs matched to that code, maintaining visual alignment across full installations.
The lacquered mirror gloss description indicates a high-sheen ABS surface, which lets this edgebanding visually align with mirror-gloss panels that depend on strong reflection for their design impact on doors, drawer fronts, and vertical elements.
The 600ft reference connects this edgebanding to extended production runs, supporting longer sequences of parts without frequent coil changes, which can simplify material handling and keep runs of identical color and finish grouped together.
The 43x1mm dimension on this Rehau ABS edgebanding defines the profile that edgebanders, guillotines, and trimmers will see, so machine setups can be dialed toward this thickness and width for consistent milling results.
Having a fixed 43mm width gives operators room to position the banding on slightly overbuilt panels, then trim back to the substrate, which supports clean corners and reduces the risk of starved edges on casework parts.
The 1mm ABS thickness interacts with standard edge banding heat and pressure settings, allowing equipment tuned for 1mm ABS to apply this product in a familiar range, which supports repeatable adhesion behavior within that material family.
The lacquered mirror gloss surface finish is part of the banding itself, so trimming and scraping routines can focus on preserving that gloss plane at the final pass, aligning edge sheen with high-gloss panel faces for a continuous appearance.
The C600902 decor reference helps align this banding to matching panels or fronts tied to that same code, which supports installations where an exact color and gloss relationship between faces and edges is essential.
This Rehau ABS edgebanding, identified by manufacturer part number 361984-006, is positioned within an edgebanding product class, so it is intended to finish exposed panel edges on cabinets, furniture components, and similar casework elements.
The 43mm width lets shops work with a range of panel thicknesses within that coverage band, giving enough overhang to trim flush on tops, bottoms, and vertical edges without leaving raw substrate exposed on visible faces.
The 1mm thickness supports everyday machining on standard edge banding equipment, allowing operators to run doors, drawer fronts, and carcass parts through familiar pressure, temperature, and feed settings tuned for 1mm ABS stock.
The ABS composition connects with projects that specify ABS edgebanding for their material standard, so a run using this product keeps the edge material aligned with that requirement across panels, doors, and interior components.
The lacquered mirror gloss characteristic means this banding is oriented toward high-gloss visual programs, giving designers and shops a way to continue the same reflective look from large panel faces around to their narrow edges.
The C600902 decor code, as part of the SAP description 43X1MM ABS C600902 LAC MIRRGLS 600FT, anchors this roll inside a defined color and finish family, which is useful when coordinated panels and fronts reference the same decor identifier.
The WBSC - 1432 - RU361984-006 web description ties the banding to Wurth Baer Supply ordering systems, helping shops store that reference in job notes so future replacements or expansions can draw the exact same item.
The 600ft length figure points this product at longer production or multiple smaller jobs, giving edge banding lines enough material to process series of cabinets or furniture pieces while staying with a single decor and finish.
The 43x1mm sizing allows edge banding equipment to be set once for that thickness and width, so repeated parts in a batch will see the same material profile, supporting consistent trimming results across a project.
The lacquered mirror gloss surface calls for finishing passes that respect a high-sheen layer, so once operators tune their trimming and scraping to protect that gloss plane, they can expect a uniform reflective appearance along every treated edge.
The C600902 decor reference provides a clear link between this banding and other materials cataloged under that code, giving shops a reliable way to align color and gloss between edges, doors, and panel faces chosen from the same decor family.
The ABS material designation supports workflows built around ABS-specific heat, pressure, and trimming behavior, so existing settings proven for other ABS edgebanding can inform how this 43x1mm band is processed in similar equipment.
The manufacturer part number 361984-006 gives engineers and buyers a precise ID to record on drawings, cut lists, or purchasing documents, which helps keep future orders locked to the same appearance and format used on the original build.
The Wurth Baer Supply web description WBSC - 1432 - RU361984-006 offers an additional searchable reference, so office staff and shop leads can align on a single identifier when aligning production notes and purchasing activity for this banding.
The Rehau 361984-006 edgebanding is ABS, so it aligns with projects that call for ABS edge material and lets shops use settings tuned for ABS behavior on their edgebanders.
The 43x1mm size specifies a 43mm wide, 1mm thick ABS strip, giving edge coverage suited to panels in that range and enough material to trim back to a clean, flush edge.
The lacquered mirror gloss finish creates a high-sheen ABS surface, so this edgebanding visually lines up with mirror gloss panels and fronts where reflective appearance is part of the design.
The C600902 decor code identifies the specific color and finish combination, helping shops match this edgebanding with panels and fronts specified under the same decor program.
The 600ft length ties this roll to extended runs, giving edge banding lines enough material to process multiple cabinets or furniture pieces while staying on a single decor and finish.
The manufacturer part number 361984-006 precisely defines this Rehau ABS edgebanding, allowing purchasing and production teams to reorder the exact same decor, size, and finish for future jobs.
The Rehau ABS edgebanding 361984-006 brings together ABS material, 43x1mm sizing, and a lacquered mirror gloss C600902 decor to serve projects built around that specific edge profile and appearance on cabinets, fixtures, or furniture fronts.
When a job calls for ABS edgebanding tied to the C600902 decor code and a 43x1mm profile, this product aligns those requirements into a single reference, simplifying selection for shops that want consistent edges across multiple components.
Sold In: 1 Roll