Rehau ABS edgebanding 361984-011 is ABS edge banding designed to finish exposed panel edges on woodworking and cabinet projects, so raw core material is covered and the finished part presents a consistent, professional edge line along every run.
The 43x1mm ABS edgebanding size means the band is produced at 43 mm width and 1 mm thickness, giving enough coverage for many common panel thicknesses while offering a solid edge profile that feels substantial in everyday use.
The C600904 reference in the description identifies a specific decor or match line within the Rehau program, helping shops align this banding with coordinated surfaces when building or repairing laminated components that rely on that decor code.
The LAC MIRRGLS notation in the description points to a lacquered mirror-gloss style finish, so the face of the banding is produced for a high-gloss visual effect that matches mirror-gloss style surfaces along the edge for a uniform, finished appearance.
The 600FT length designation indicates this edgebanding is supplied in a 600-foot run, giving shops a continuous length that supports longer production runs or multiple projects using the same Rehau, Inc. 361984-011 specification.
The 43x1mm ABS edgebanding dimension anchors how this banding fits typical casework and panel builds, because the 43 mm width offers generous coverage for many standard board thicknesses while leaving workable trim margins after bonding.
The 1 mm thickness in the 43x1mm ABS C600904 LAC MIRRGLS 600FT description produces an edge that reads as a solid band rather than a film, so routed or flushed edges present a defined profile that complements modern cabinetry and furniture lines.
As an ABS edge banding product in the Edgebanding category, this strip is intended to be applied along panel edges in woodworking environments, allowing fabricators to conceal the panel core and align the visual finish to the chosen surface decor.
The Rehau ABS edge banding identification gives shops a consistent reference for matching this 361984-011 item in future work, which supports repeat jobs, repairs, or expansions that must visually align with earlier runs using the same decor code.
The Edge Banding product class and Edgebanding category place Rehau ABS edgebanding 361984-011 directly in panel-edge finishing roles, so it is used where exposed edges on laminated or coated boards need a matching decorative band.
The 43 mm width described in 43x1mm ABS C600904 LAC MIRRGLS 600FT supports edge treatment on panels that fall within that coverage range, giving shops flexibility for case sides, shelves, and similar components that share that thickness window.
The LAC MIRRGLS mirror-gloss style noted in the description aligns this banding with high-gloss panel faces, allowing cabinet and furniture builders to carry a mirror-like appearance continuously from the main surface around the edges of doors or carcass parts.
The C600904 reference in the SAP description acts as a decor pointer within the Rehau ABS edge banding lineup, which matters when a project specification calls out that code for color or effect consistency across multiple components or job phases.
The 600FT length listed in the product description is suited to production-minded woodworking shops, because the long coil format supports edging numerous parts with the same 361984-011 band before a changeover is needed in the workflow.
The Rehau, Inc. brand attached to this ABS edgebanding signals that 361984-011 follows a defined manufacturing standard, so shops can expect the 43x1mm dimensions and LAC MIRRGLS finish to repeat predictably across coils purchased for different projects.
The ABS material specification in the Rehau ABS edgebanding name identifies the polymer used for the strip, giving installers a consistent substrate to work with when dialing in edgebander heat, pressure, and trimming tools for this specific class of banding.
The 1 mm thickness in the 43x1mm ABS designation sets how the edge feels and trims in practice, supporting a balance between a solid-looking edge and manageable trimming passes when finishing cabinet, furniture, or fixture components.
The C600904 LAC MIRRGLS wording in the SAP description ties thickness, width, decor, and gloss level into one coded product, allowing project documents or cut lists to carry a precise shorthand that points back to this specific 361984-011 banding.
The Edge Banding classification in the product data confirms this Rehau ABS edge banding is dedicated to edge finishing rather than general molding, helping shops assign it to edgebanders and edge-focused workflows where those metric dimensions are fully utilized.
Rehau ABS edgebanding 361984-011 uses a 43x1mm size, meaning the strip is 43 mm wide and 1 mm thick, which guides setup for edge coverage and trimming on matching panel thicknesses.
The C600904 LAC MIRRGLS description identifies a specific decor and mirror-gloss style for this ABS edgebanding, helping projects call out the exact visual match for high-gloss panel edges.
The ABS material in this edge banding defines the plastic substrate, so edgebanders and trimming tools can be set for ABS behavior across heating, bonding, and finishing passes on cabinet parts.
The 600FT length described for Rehau ABS edgebanding 361984-011 supplies a long continuous run, supporting uninterrupted edging of many parts before any coil change on production equipment.
The LAC MIRRGLS mirror-gloss style gives the banding a high-gloss face, so finished edges visually align with mirror-gloss panels, keeping reflections and sheen consistent around doors and panels.
The Edge Banding product class and Edgebanding category show this Rehau 361984-011 item is dedicated to panel-edge finishing, guiding shops to use it specifically in edgebanding workflows.
The Rehau ABS edgebanding 361984-011 specification combines a 43x1mm ABS strip with a C600904 LAC MIRRGLS mirror-gloss style, so it aligns edge finish, decor, and thickness for panel-based woodworking projects using that visual standard.
The 600FT length format and defined Edge Banding classification position this Rehau ABS edge banding as a practical choice when a shop wants one coded product to carry mirror-gloss edging consistently across production or follow-up work.
Sold In: 1 Roll