Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding 361987-022 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so cut board edges are covered and visually clean on cabinets, casework, or fixtures. The 43x1mm ABS C700208 EMX LAC dimension in the SAP description indicates this strip is 43mm wide and 1mm thick, which covers standard panel thicknesses while allowing enough material for a solid glue line and trimming. The ABS material classification identifies it as a thermoplastic edging, so it conforms along straight runs when properly processed and gives a consistent edge surface. As an edge banding product in Wurth Baer Supplys edgebanding offering, it fits into a workflow where panels are cut, edged, and trimmed before assembly, helping deliver a finished appearance on workpieces that would otherwise show raw core.
The 43x1mm ABS C700208 EMX LAC 600FT detail in the SAP description indicates this Rehau ABS edgebanding is sized for edges that need roughly 43mm of coverage, which suits panels where the face thickness plus front and back wrap fall within that width. The 1mm thickness helps create a defined transition at the edge instead of a film-like layer, which matters when routing or scraping flush on production edgebanders. As ABS edge banding, it is intended for operations where the edging is bonded to substrate edges and then trimmed, so it integrates into standard casework and cabinet fabrication sequences. The defined manufacturer part number 361987-022 lets shops specify the same edgebanding consistently across multiple runs, supporting visual continuity in repeat work.
The product name Rehau ABS Edgebanding, 361987-022 establishes it as an ABS edgebanding choice for finishing exposed panel edges in woodworking applications. The 43mm width called out in 43X1MM ABS C700208 EMX LAC 600FT makes it suitable for panel situations where the edge plus front and back wrap land inside that coverage, such as typical casework built from board that requires a modest wrap beyond the thickness itself. The 1mm thickness in the SAP description gives the edge a more substantial profile than ultra-thin tapes, which helps create a crisp line when trimming and scraping on cabinet or fixture edges. As an edge banding under Wurth Baer Supplys edgebanding category, it slots into workflows for cabinet shops, millwork operations, and other woodworking environments that already process ABS edging on automatic or manual equipment.
The 43X1MM ABS C700208 EMX LAC 600FT SAP description provides fixed dimensions and material type, so once a shop dials in feed, heat, and trim settings for this specific 43x1mm ABS, those parameters can be reused for consistent edges from job to job. The 1mm thickness influences cutter and scraper settings, and keeping that dimension constant through the 361987-022 part number reduces the need to change tooling offsets between runs of the same edging. The ABS designation signals that it behaves as an ABS thermoplastic during machining, which matters when tuning trimming, scraping, and buffing steps around this edge banding. Combined with the Rehau brand and specific part number, these stable characteristics help a shop standardize its edgebanding process and maintain a uniform appearance on panels that use this product.
Rehau ABS edgebanding 361987-022 is an ABS edge banding from Rehau, Inc., used to cover and finish exposed panel edges so raw board edges are not visible on the finished piece.
The SAP description 43X1MM ABS C700208 EMX LAC 600FT indicates this edgebanding is 43mm wide and 1mm thick, giving coverage for typical panel edges with material left for trimming.
The 1mm thickness provides a solid edge layer, which affects how tools trim and scrape it and gives a more defined edge profile compared to very thin edging materials.
The manufacturer part number 361987-022 uniquely identifies this specific Rehau ABS edgebanding, so shops can specify and reorder the exact same edging across multiple projects.
The 43mm width allows coverage of the panel edge plus a front and back wrap margin, so trimming operations can cut back to a clean, flush edge without exposing the core.
Being classified by Wurth Baer Supply as Edge Banding and Edgebanding places this product with related edging items, helping users match it to other board and laminate choices.
Rehau ABS edgebanding 361987-022 combines a defined 43mm width, 1mm thickness, and ABS material in a single, clearly identified edge banding product. The 43X1MM ABS C700208 EMX LAC 600FT description gives stable dimensions for dialing in edgebander and trimming setups. With the Rehau brand and specific manufacturer part number, this edging supports repeatable panel finishing on projects that demand consistent edge appearance. For shops aligning edgebanding with core materials and laminates, this clearly specified ABS edge banding offers a reliable reference point when planning and running production work.
Sold In: 1 Roll