Rehau ABS edgebanding 361988-003 is an ABS edge banding from Rehau, Inc. that provides a dedicated solution for finishing exposed edges on panels in woodworking projects. The SAP description "43X1.2MM ABS LE C600895 EMX LAC 600FT" establishes that this is an ABS material strip sized at 43 mm wide and 1.2 mm thick, giving a substantial edge profile suitable for many furniture and cabinet components. The ABS construction supports edge finishing where an ABS edgebanding is required, helping deliver a consistent material from face to edge. The 43 mm width offers coverage for panels in that size range without multiple passes, which can simplify layout on straight runs. The 1.2 mm thickness creates a more solid edge presence than very thin tape, which is useful when an application calls for a more robust edge detail.
The SAP description "43X1.2MM ABS LE C600895 EMX LAC 600FT" defines the physical format of Rehau ABS Edgebanding, 361988-003, giving installers concrete size parameters. With 43 mm width, the banding is suited to panel edges that are dimensioned to work with that coverage, leaving room for trimming and flush-finishing. The 1.2 mm thickness provides a defined edge layer that responds differently in cutting and trimming than ultra-thin bandings, which can influence tool setup and feed speed choices during installation. The 600-foot length designation signals a continuous supply length suited to repetitive production runs, reducing interruptions to stop and change material. Having these dimensions clarified in the product description supports planning of edgebanding passes, trimming steps, and material yield on a per-job basis.
This Rehau ABS Edgebanding, 361988-003, is categorized as Edge Banding and Edgebanding, aligning it with tasks that finish exposed panel edges in woodworking environments. The ABS designation in "ABS LE C600895" means it serves situations where an ABS edge is needed on board materials, such as casework or furniture components using compatible surfaces. The 43 mm width allows application on panels dimensioned around that edge size, giving coverage that accommodates trimming to a clean finished line. The 1.2 mm thickness supports applications calling for a more substantial edge layer than very thin tape, which can matter on parts where the edge acts as a visible design feature. The 600FT length supports runs where many similar components share the same edge treatment, helping maintain uniform material throughout a set of cabinets or fixtures.
The defined "43X1.2MM" dimension in the SAP description gives fabricators a predictable match between panel thickness and edge coverage, which helps plan trimming allowances and tool paths. The ABS material callout in "ABS LE C600895" indicates that this is part of an ABS system, supporting jobs where ABS is specified for edge and surface coordination. The manufacturer part number 361988-003 provides a repeatable reference, so once a shop dials in equipment settings for this banding, the same part number can be used to reproduce results on later orders. The 600FT length recorded in the description means the edgebanding is suited to extended production runs of similar parts, which helps reduce downtime tied to material changes. Together, these details allow shops to align this Rehau edgebanding with panel sizing, equipment setups, and run length expectations on repetitive woodworking projects.
Rehau ABS Edgebanding, 361988-003 is identified in the SAP description as ABS, so it is suited to applications where ABS edge material is required to match project specifications.
The SAP description lists this edgebanding as 43X1.2MM, providing a 43 mm width and 1.2 mm thickness for planning edge coverage and trimming allowances.
Rehau ABS Edgebanding, 361988-003 is described with a 600FT length, supporting larger production runs where extended continuous edgebanding is advantageous.
This product is categorized as Edge Banding and Edgebanding, aligning it with woodworking projects that need finished edges on panels and similar components.
The manufacturer part number 361988-003 links directly to Rehau documentation, helping shops reorder the same ABS edgebanding once they have validated it on their equipment.
The 1.2 mm thickness noted in the SAP description creates a defined edge layer, which influences trimming behavior and supports applications needing a more substantial edge profile.
Rehau ABS Edgebanding, 361988-003 from Wurth Baer Supply pairs a clearly defined 43X1.2MM dimension with a 600FT length, giving shops a consistent ABS edge material for repeatable panel work. The manufacturer part number and ABS designation in the SAP description support accurate reordering and coordination with other ABS-based components. When your project calls for ABS edge banding sized to 43 mm width and 1.2 mm thickness, this Rehau option provides a clearly specified choice suited to production-oriented woodworking workflows.
Sold In: 1 Roll