Rehau ABS edgebanding 361988-012 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges in woodworking and cabinet projects, so raw substrate is covered and edges present as uniform, job-ready surfaces. The SAP description listing 43x1.2mm defines a 43 mm wide, 1.2 mm thick band, giving enough coverage for common panel thicknesses while adding a sturdier edge profile than thin tape-style materials. The ABS material designation identifies a thermoplastic edge solution, supporting typical woodworking shop machining such as trimming and flush finishing. The product class of edge banding confirms its role as a finishing band along doors, drawer fronts, and casework edges where a consistent appearance is required. The manufacturer part number 361988-012 ties directly to Rehau specifications, helping match this banding accurately to existing runs or project documents when a specific Rehau reference is called out.
The 43x1.2mm sizing in the SAP description defines how this Rehau ABS edgebanding registers on the edge of panels during application. The 43 mm width allows the band to overhang both faces of standard panels before trimming, so flush-cut tooling can remove the excess and leave a straight, even edge. The 1.2 mm thickness establishes the edge build-up, contributing to an edge profile that can be machined without feeling overly fragile. As an edge banding product in the woodworking category, this Rehau ABS strip is intended to be bonded along exposed panel edges, then trimmed and finished in line with standard shop practice to achieve a consistent finished perimeter around cabinet and furniture components.
This Rehau ABS edgebanding sits in the Miscellaneous|Edgebanding category, placing it among materials used to finish raw panel edges in woodworking environments. Its 43 mm width supports use on typical cabinet sides, shelves, doors, and similar components, where panels require a finished edge along one or more sides. The 1.2 mm thickness from the 43x1.2mm specification gives an edge that can stand up to normal handling of doors and fronts while blending visually with the panel surface. Being identified as edge banding, this Rehau strip is suited to situations where the goal is to transition from a flat panel face to a protected, uniform edge line, such as on casework ends or exposed shelving edges in shop or commercial projects.
The explicit ABS material designation in the SAP description defines a stable thermoplastic edgebanding that responds predictably during trimming and machining, which matters when running multiple panels and aiming for consistent edges across a job. The 43 mm width gives installers working room for slight alignment variation at application, because excess material can be trimmed back to the panel faces without starving the edge of coverage. The 1.2 mm thickness offers an edge that is thick enough to shape and lightly ease, which can reduce sharp-feeling corners on cabinet doors and panels. The manufacturer part number 361988-012 and the Rehau branding work together as a clear reference for matching this edgebanding to design specifications that list Rehau ABS material and this exact part for visual continuity from piece to piece.
Rehau ABS edgebanding 361988-012 is an ABS edge banding from Rehau, Inc., used to cover exposed panel edges so cabinet and woodworking components present a finished perimeter.
The 43x1.2mm description indicates this Rehau ABS edgebanding is 43 mm wide and 1.2 mm thick, guiding edge coverage and the resulting edge profile after trimming.
The ABS designation identifies a thermoplastic edge banding that integrates into woodworking workflows where edging is bonded, trimmed, and finished using standard shop machinery.
This Rehau ABS edge banding, classified as edge banding, is applied along exposed edges of panels such as cabinet sides, shelves, and doors to cover the raw substrate.
The 1.2 mm thickness, stated in the 43x1.2mm description, provides a more substantial edge that can be machined and lightly eased for a solid-feeling cabinet perimeter.
The 361988-012 manufacturer part number gives a precise Rehau identifier, supporting consistent reordering when the same edging is specified across multiple projects.
This Rehau ABS edgebanding, identified as 361988-012 with a 43x1.2mm specification, offers a defined edge profile sized for common panel work in woodworking and cabinet projects. The ABS material and edge banding classification align with standard shop trimming and finishing workflows. For projects built around Rehau references where this exact part number is specified, selecting this edging supports consistent appearance and dimensions across doors, shelves, and casework edges.
Sold In: 1 Roll