Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding 361988-014 is an ABS edge banding from Rehau, Inc. that covers and finishes raw panel edges so cabinet and furniture parts present a uniform, usable edge. The SAP description "43X1.2MM ABS LE C100350 EMX LAC 600FT" identifies it as 43 mm wide and 1.2 mm thick ABS material, which suits edge coverage on panels sized for this width. The 600FT length reference points to a long continuous run, which supports edging multiple components in one material and finish. As part of the Edge Banding product class under the Edgebanding category, it fits into typical woodworking workflows where panels need an applied edge solution that matches a defined spec. The Rehau, Inc. brand designation ties this edgebanding to a recognized manufacturer of ABS edge materials.
The "43X1.2MM" detail in the SAP description defines this Rehau ABS edgebanding as 43 mm wide and 1.2 mm thick, which matters when matching it to panel thickness and edge-banding equipment set for those dimensions. As an ABS Edge Banding within the Edgebanding category, it is meant for application along panel edges, so these dimensions help align it with edge-bander machine setups that are calibrated to similar tape sizes. The 600FT reference in the same description indicates a continuous length that supports extended production runs with a single setup using this specific banding.
The Rehau ABS Edgebanding, 361988-014, is listed by Wurth Baer Supply under Miscellaneous|Edgebanding in the Edge Banding product class, which places it directly in common cabinet and furniture panel workflows. The SAP description "43X1.2MM ABS LE C100350 EMX LAC 600FT" identifies it as a 43 mm wide, 1.2 mm thick ABS banding in a defined finish variant, which lets shops select it when panel designs and layouts call for that specific band width and thickness. When panels are cut to accept 43 mm edge coverage, this dimension helps the banding span the edge properly so trimming and flush routing leave a clean edge line. The 600FT length reference supports projects with many repeated parts because a single spec of edgebanding can be run across all corresponding edges.
The "43X1.2MM" notation in the SAP description defines both width and thickness in one spec, which supports consistent edge results because machine setups and trimming expectations can be matched to this exact profile. As an ABS Edge Banding from Rehau, Inc., identified by Manufacturer Part # 361988-014 and Web Description "WBSC - 1432 - RU361988-014," this product ties every reference on a job back to one defined banding, which simplifies ordering the same edge material again when a project repeats. The 600FT length detail supports longer production sequences on cabinets or furniture runs, because operators can process multiple components with the same ABS edgebanding spec without changing material midstream.
Rehau ABS edgebanding 361988-014 is an ABS Edge Banding listed in the Edgebanding category, so it is used to cover and finish the exposed edges of panels in woodworking projects.
The "43X1.2MM" in the SAP description indicates this ABS edgebanding is 43 mm wide and 1.2 mm thick, which guides panel edge design and edge-banding machine setup.
The 600FT reference in the SAP description points to a long continuous run, which supports edging many parts with the same ABS edgebanding spec in one production sequence.
The 361988-014 ABS edgebanding is from Rehau, Inc., which ties the product to this manufacturer for matching material and future repeat orders.
This ABS edgebanding is identified by Manufacturer Part # 361988-014 and the SAP description "43X1.2MM ABS LE C100350 EMX LAC 600FT," which together define its size and variant.
The product is listed by Wurth Baer Supply under the Miscellaneous|Edgebanding category as an Edge Banding item, positioning it among other panel edge solutions.
The Rehau ABS Edgebanding, 361988-014, combines a clearly defined 43X1.2MM size with ABS material and a 600FT length designation, so it aligns with projects designed around that exact edge profile. As an Edge Banding product from Rehau, Inc., identified in the Miscellaneous|Edgebanding category by Manufacturer Part # 361988-014, it ties job planning, production, and reordering to one consistent edgebanding spec. When a run of cabinet or furniture components calls for 43 mm wide, 1.2 mm thick ABS edges, this product provides that defined edge banding reference.
Sold In: 1 Roll