Rehau ABS edgebanding 43x1mm identifies this product as a 43 mm wide, 1 mm thick ABS edge banding, so it covers standard furniture and casework edges with a consistent strip that hides core material and gives panels a finished appearance. The ABS material reference in the description means the banding is based on acrylonitrile butadiene styrene, which supports typical woodworking fabrication methods where a thermoplastic edge is preferred over exposed substrate. The manufacturer part number 363325-001 ties this specific banding to a defined color and finish in the Rehau system, which helps match it to CP60637 mirror gloss panel stock in jobs that call for coordinated surfaces. The edge banding product class notation confirms that it is intended for edge treatment tasks, so it fits into workflows where raw board edges need to be converted into visually consistent, wipeable surfaces on cabinets, fixtures, or similar projects.
The 43 mm width noted in the description gives adequate coverage for commonly used panel thicknesses, so installers can position the band over the edge with some overhang and then trim it flush without risking gaps. The 1 mm thickness reference indicates a moderately thick ABS edge, which creates a noticeable, durable strip that stands up to typical handling rather than a very thin film that might mark more easily during fabrication. The mirror gloss term in the product description points to a highly reflective surface, which aligns with high-gloss panel systems and allows the edge detail to read similarly to the faces under normal lighting on finished jobs. The CP60637 code in the description ties this edge banding to a specific decor match, so shops can maintain visual continuity from panel to edge wherever that decor is specified in casework or fixtures.
The product class listing as edge banding defines this Rehau item for closing off raw panel edges, so it fits naturally in cabinet, furniture, and fixture workflows where exposed substrate needs to be covered. The ABS material noted in the description suits applications that expect a thermoplastic edge, so shops can incorporate it into edge-banding stations designed around ABS processing characteristics. The 43 mm width supports use on standard panel sizes because it offers enough overhang to trim back on both faces, which is important when running parts with slight dimensional variation through edgebanding machines. The 1 mm thickness provides a solid edge profile that stands out cleaner on corners than ultra-thin tape, helping finished panels present a defined boundary between face and edge surfaces. The CP60637 mirror gloss reference in the description indicates that this banding is intended to coordinate with a CP60637 mirror gloss surface, which is useful wherever that specific decor is part of a design package so that edges read as part of the same system. The 600 foot length callout suits environments producing multiple parts in the same decor, allowing extended runs of case parts, doors, or shelves without frequent roll changes during production.
The Rehau, Inc. brand assignment in the product data connects this banding to an established color and decor catalog, which supports consistent matching when a project repeats CP60637 mirror gloss surfaces across several areas. The explicit 43x1mm dimension in the description helps programmers and machine operators reference a known width and thickness, which is important when dialing in edgebander settings for trimming, scraping, and corner work. The ABS material designation signals that the product behaves as a thermoplastic edge, which influences temperature and feed settings on equipment that is already tuned around ABS performance. The mirror gloss finish identified in the description points to a reflective surface level that aligns with high-gloss faces, so fabricators can plan handling and stacking routines that respect the appearance of a gloss system during edge processing. The manufacturer part number 363325-001 ties procurement, inventory, and production instructions to a single identifier, which helps avoid mix-ups between different decors or finishes when multiple Rehau bandings are present in the same shop. The 600FT length reference in the description supports workflow planning because a single roll can feed many parts, which reduces downtime associated with changing materials mid-run on a busy edgebander line.
Rehau 363325-001 ABS edgebanding is described as 43x1mm, meaning it is 43 mm wide and 1 mm thick, which suits many standard panel edges that require a trim-capable overhang.
Rehau 363325-001 edge banding is identified as ABS, so it is based on acrylonitrile butadiene styrene, fitting workflows designed around thermoplastic edgebanding processes.
The CP60637 mirror gloss notation links this ABS edgebanding to a specific high-gloss decor, helping projects keep panel faces and edges visually coordinated where CP60637 mirror gloss is specified.
The 600FT reference indicates a 600 foot length, allowing extended runs of matching parts so shops can process many edges before changing to another roll.
The 1 mm thickness provides a substantial ABS edge profile, giving finished panels a defined border that stands up to typical handling and post-processing of case parts.
The 363325-001 part number uniquely identifies this CP60637 mirror gloss ABS edgebanding, supporting accurate reordering and consistent color and finish matching across projects.
The CP60637 mirror gloss description on this Rehau ABS edgebanding links it directly to that specific decor, so it fits work where CP60637 mirror gloss panels or components are part of the design. The 43x1mm dimension suits standard panel edges that need enough overhang for trimming while maintaining a 1 mm ABS profile. The 600FT length reference supports production environments that run multiple parts in the same finish, helping maintain continuity from the first piece to the last in a job that relies on this exact Rehau 363325-001 banding.
Sold In: 1 Roll