Rehau ABS edgebanding 716041-042 is an ABS edge banding from Rehau, Inc. that finishes exposed board edges so panel projects have a consistent, finished look across doors, drawer fronts, and carcass parts. The product is identified as edge banding in the Edgebanding category, so it serves as the finishing layer over raw substrate edges in woodworking or cabinet components. The SAP description lists 15/16X.018 CP60205 LAC 600FT, showing it is a 15/16 inch wide, .018 inch thick ABS band in the CP60205 LAC reference and supplied in a 600 foot roll length, which supports longer production runs and repeat jobs from the same material reference. The manufacturer part number 716041-042 ties this specific color or finish into Rehau systems, which helps shops match the same banding across jobs that share the same specification.
The SAP description 15/16X.018 CP60205 LAC 600FT specifies that this Rehau ABS edgebanding is 15/16 inch wide, which provides slight overhang on nominal 3/4 inch panels so edges can be trimmed back clean after bonding for a flush result. The .018 inch thickness stated in the same description defines a relatively thin ABS layer, which helps create a low-profile edge that blends visually with the panel face while still covering the substrate. The 600FT length in the description indicates a long roll format, which supports continuous runs across multiple cabinet parts on an edgebander without frequent stops to change material during production.
The product name Rehau ABS Edgebanding, 716041-042 and the category Edgebanding show this material is intended for finishing the exposed edges of manufactured panels in woodworking or similar shop environments. As an ABS edge banding from Rehau, Inc., it aligns with applications where an ABS-based edge is desired on casework, shelving, or furniture components that use panel constructions. The SAP description calls out 15/16X.018 CP60205 LAC 600FT, indicating a width that suits edging panels that are around 3/4 inch thick, which are common in cabinet carcasses and built-ins. In this context, the 600 foot roll length supports production work where many parts share the same finish, allowing longer edging runs before changing material.
The manufacturer part number 716041-042 and the CP60205 LAC reference in the SAP description together position this banding for jobs that require consistent repeatability of the same finish or specification across multiple orders. When a shop references 716041-042 in its internal documents, it is tying that work directly to this specific ABS edge banding from Rehau, which helps maintain continuity in appearance as door fronts, panels, and replacement parts are produced at different times but with the same specified banding.
The SAP description 15/16X.018 CP60205 LAC 600FT provides key edge dimensions that affect finished results at the machine. The 15/16 inch width gives enough material beyond a typical 3/4 inch board edge to allow trimmers to cut back to a precise flush or slightly radiused edge, helping avoid visible substrate at the corners. The .018 inch thickness provides a defined edge profile while keeping the band relatively thin, which can support a smoother transition between banding and surface in many panel applications.
The long 600 foot roll identified in the SAP description means a single roll can edge a significant number of parts, which supports uninterrupted operation on edgebanding equipment. This extended length also aids repeatability, because the same roll can be used across a full batch of cabinet components that share the same Rehau ABS edgebanding 716041-042 specification. The manufacturer part number 716041-042 keeps that specification consistent for future runs, aligning procurement and production around the same edge banding when matching previous work or standard shop programs.
Rehau 716041-042 is ABS edgebanding from Rehau, Inc., so it is used as edge banding to finish exposed panel edges in woodworking or cabinet-related applications.
The SAP description 15/16X.018 CP60205 LAC 600FT shows the banding is 15/16 inch wide and .018 inch thick, which suits edging work on many panel-based components.
The SAP description lists 600FT, so this ABS edge banding comes in a 600 foot roll that supports extended edgebanding runs in shop production.
The CP60205 LAC reference appears in the SAP description, identifying a specific variant of this ABS edgebanding so shops can call out the same material consistently.
This product is in the Edgebanding category and Edge Banding product class, which helps purchasing teams locate it as a dedicated edge finishing material.
Manufacturer part number 716041-042 uniquely identifies this Rehau ABS edgebanding, linking shop documents and reorders to the same specific banding.
Rehau ABS edgebanding 716041-042 provides a defined 15/16 inch by .018 inch ABS edge banding format from Rehau, Inc., so panel-based projects can rely on a consistent dimension when finishing exposed edges. The SAP description 15/16X.018 CP60205 LAC 600FT confirms a 600 foot roll length, which supports longer production runs under a single material reference for cabinet, furniture, or other panel constructions. The clear identifiers Rehau ABS Edgebanding, 716041-042 and CP60205 LAC align purchasing and shop documentation around one specific edge banding choice, supporting repeatable results across current jobs and future orders that call out the same Rehau banding.
Sold In: 1 Roll