Rehau ABS edgebanding 716041-043 15/16 x .018 600FT

Rehau ABS Edgebanding For Professional Panels

Rehau ABS edgebanding in the 716041-043 variant is an ABS edge banding designed for finishing exposed panel edges so cut boards present a clean, uniform edge on cabinets and other casework. The 15/16 inch width covers standard panel thickness with enough material to trim flush, which supports a consistent edge line after routing or trimming. The .018 inch thickness gives a low-profile edge that blends closely with the panel face, which helps projects maintain a precise, tailored look. The CP40690 LAC designation identifies the specific color and finish family for this edging, which lets shops repeat the same visual result across multiple jobs. The 600FT length provides extended run capacity from a single roll, which helps shops process multiple panels or full projects without frequent material changes.

Key Edgebanding Details That Support Workflow

• The 15/16 inch width spans typical board thicknesses while leaving trimming margin, which lets installers apply the banding with slight overhang and bring it back to the panel for a straight, clean edge.
• The .018 inch thickness keeps the edge banding relatively thin, which helps the transition between face and edge feel smooth and reduces the visual step where the edging meets the panel surface.
• The ABS material construction defines this as ABS edge banding, which supports consistent machining and trimming behavior across runs when working with standard woodworking tools and methods.
• The CP40690 LAC identifier ties this edging to a specific Rehau color and finish family, which supports visual coordination when matching existing components or repeating a finish scheme.
• The 600FT roll length allows extended production from one roll, which helps minimize changeovers during edgebanding operations and supports longer continuous runs on edgebanders.

Edgebanding Dimensions That Influence Installation

The 15/16 inch width on this Rehau ABS edgebanding gives installers extra material beyond common panel thicknesses, which allows the edging to be applied slightly proud and then trimmed back for a precise edge. The .018 inch thickness forms a relatively thin edge layer, which helps trimming tools create a smooth transition without a heavy lip at the panel edge. The 600FT length noted in the description provides a long continuous run for edgebanding machines, which supports steady production on larger jobs where multiple cabinet components share the same edging specification.

Using This Rehau Edgebanding In Real Projects

Where This Rehau 716041-043 Edgebanding Fits

This Rehau ABS edgebanding, identified as 716041-043, is part of the edge banding category for woodworking applications, which positions it for finishing cabinet parts and other panel-based assemblies. The 15/16 inch width matches well with common panel constructions where the core is near 3/4 inch, giving the extra coverage needed to handle slight sizing variations while still trimming cleanly. The CP40690 LAC designation links the edging to a defined visual specification, which matters when shops are building multiple units or matching prior work under the same scheme. Because the SAP description notes a 600FT roll, the product supports shop environments where repeated edge runs in the same material are required across several cabinet boxes or runs of shelving.

Details That Help Maintain Consistent Results

The .018 inch thickness of this ABS edge banding sets the profile installers will trim to, which helps trimming and scraping steps remain light while still leaving a finished layer that covers the core. The ABS material works as a defined substrate for machining, which supports predictable behavior when running through standard commercial edgebanders or handheld trimmers. The 15/16 inch width assists in controlling the final reveal along the edge, as the slight overage can be routed flush to the panel for a straight visual line. The 600FT length called out in the product description supports repeatability by letting the same roll serve multiple cuts and assemblies, which helps keep color and finish consistent from part to part across a job.

Common Questions About Rehau ABS Edgebanding 716041-043

Choose This Edgebanding For Matched Panel Edges

This Rehau ABS edgebanding, identified by part number 716041-043 and CP40690 LAC, offers a defined 15/16 inch by .018 inch size that supports precise trimming and consistent edge lines. The 600FT length suits shops planning repeated runs in the same finish. For cabinet and panel projects that require ABS edge banding with a known visual specification, this Rehau option from Wurth Baer Supply aligns panel edges and finish details across the job.