Rehau ABS edgebanding identifies this product as an ABS-based edge banding from Rehau, Inc., which gives cabinet and furniture edges a finished, professional look that matches adjacent surfaces on projects using this specific design.
The product name Rehau ABS Edgebanding, 716041-114 ties it directly to the manufacturer part number 716041-114, so installers and shops can reorder the same edgeband and keep color and texture consistent across new work and field touch-ups.
The SAP description 15/16X.018 CP30289 LAC 600FT confirms a 15/16 inch width and .018 inch thickness, giving a slim, precise edge that sits tight to the substrate and keeps edge build minimal for modern casework lines.
The same SAP description specifies CP30289 LAC, which identifies the intended decor match, so fabricators aligning to CP30289 panels or components can select this edge banding to keep faces and edges visually coordinated.
The 600FT detail in the SAP description indicates a roll length suitable for production runs, helping shops run longer edging sequences with fewer roll changes on their edgebanders.
The SAP description 15/16X.018 CP30289 LAC 600FT provides the working size of this Rehau ABS edge banding, so edgebander setup can be tuned to a 15/16 inch tape, reducing trial runs and improving alignment at the glue line.
The .018 inch thickness detail supports predictable trimming and scraping because knives and trimmers can be set with the thin edge in mind, reducing the potential for digging into the panel surface during finishing passes.
The 600FT length listed in the description allows longer runs on an edgebanding machine before roll changeover, which helps maintain consistent feed tension and keeps production flowing on repetitive cabinet or component batches.
Identifying the edge as part of the Edge Banding product class confirms its role in standard edgebanding workflows, so it can be routed, trimmed, and finished using typical ABS edge banding equipment settings.
The Rehau ABS Edgebanding, 716041-114 is categorized under Miscellaneous|Edgebanding and Product Class Edge Banding, placing it in everyday cabinet and furniture edge finishing where raw panel edges need a coordinated decorative band.
The CP30289 LAC portion of the 15/16X.018 CP30289 LAC 600FT description identifies a specific decor reference, so it fits jobs built around that CP30289 design where visual continuity from panel face to edge is part of the project scope.
The 15/16 inch width supports use on common panel constructions that require near full-face coverage of the edge, which helps avoid exposed substrate and reduces the need for secondary filling or painting along the edge.
The .018 inch thickness allows this ABS edge banding to sit close to the plane of the panel surface, so once trimmed it can support a clean, streamlined look on doors, drawer fronts, and case edges.
The 600FT roll length means it works well in shop environments handling multiple cabinets or repeated parts, because one roll can service many linear feet of edging before any interruption for changeover.
The combination of brand Rehau, Inc. and manufacturer part number 716041-114 gives a stable identifier for repeat orders, which matters when maintaining consistent edging across phased projects or when replacing damaged components later.
The product name Rehau ABS Edgebanding, 716041-114 and SAP description 15/16X.018 CP30289 LAC 600FT together define size and decor, helping production teams document exactly which edge banding is specified on shop drawings and cut lists.
The ABS Edgebanding designation indicates an ABS-based edge solution, so tooling and machine settings already dialed in for ABS can be applied, supporting predictable trimming quality across extended runs.
The 15/16 inch width called out in the SAP description allows a small margin beyond nominal panel thickness, giving just enough overhang for trimmers to cut back to a clean, flush edge without excessive waste.
The .018 inch thickness detail contributes to light edge mass, which can simplify fine-tuning of scraping and buffing steps where operators want the edge to blend closely with laminate or coated surfaces.
The CP30289 LAC reference ensures the edge banding is tied to a defined decor, so designers and fabricators can specify this exact band when they want the edge to follow that CP30289 look across all visible edges.
The 600FT length indicated in the description supports efficient material planning because estimators can translate total linear edge requirements into a clear number of rolls for a given project.
Rehau ABS Edgebanding, 716041-114 is described as ABS edgebanding, meaning it is based on ABS material, which aligns with equipment and settings commonly used for ABS edge banding processes.
The Rehau ABS edgebanding 716041-114 has a width identified in the SAP description as 15/16 inch, giving coverage suitable for standard panel edges with minimal overhang for trimming.
The SAP description lists .018 inch thickness, providing a thin edge profile that supports smooth trimming and a subtle transition from edge to panel surface.
The same SAP description specifies 600FT, giving a roll length that supports extended cabinet or furniture production runs before material change is needed.
The CP30289 LAC portion of the description identifies the decor reference for this edge banding, aligning it with projects using that CP30289 look on panels or components.
Rehau 716041-114 is listed under Category Miscellaneous|Edgebanding and Product Class Edge Banding, confirming its role as decorative banding for panel edges.
The combination of product name Rehau ABS Edgebanding, 716041-114 and SAP description 15/16X.018 CP30289 LAC 600FT provides a defined width, thickness, length, and decor reference, allowing shops to specify and source this exact band confidently.
By ordering Rehau ABS edgebanding under manufacturer part number 716041-114, fabricators working with CP30289-based designs can keep edge treatment aligned with their chosen panels and support consistent results across multiple jobs.
Sold In: 1 Roll