Rehau ABS edgebanding is an ABS edge banding from Rehau, Inc. that is designed to finish exposed panel edges, so cabinet and furniture projects present a clean transition instead of raw core. The 15/16 inch width stated in the description gives coverage over typical 3/4 inch panels with a bit of overhang, so trimming operations can flush the edge without exposing substrate. The .018 inch thickness described in the SAP text identifies this as a thin edgebanding, which suits jobs where a light edge detail is preferred over a heavy radius. The CP40817 LAC designation in the SAP description identifies a specific decor and surface type, so projects using that matching material maintain color and surface continuity across doors, drawer fronts, and casework. The 600 foot length called out in the SAP description supports longer production runs, so multiple pieces can be edged from a single continuous run.
The SAP description listing 15/16 inch width aligns this Rehau ABS edgebanding with common 3/4 inch casework, so standard edgebanders and trimmers can process it with familiar setups. The .018 inch thickness defined in the same description identifies a flexible edge material, so it responds well to typical glue application and trimming knives without aggressive stock removal. The CP40817 LAC identifier in the SAP text points to a specific finish configuration, so when that same code appears on panel materials, the banding helps maintain visual continuity around openings and long runs. The 600 foot length documented in the description supports continuous feeding through edgebanders on repetitive parts, so operators can maintain throughput without frequent roll changes.
The product class "Edge Banding" identifies this Rehau ABS edgebanding as trim for exposed panel edges, so it naturally fits cabinet, furniture, and casework builds using panel construction. The 15/16 inch width specified in the SAP description suits edging for panels built from standard sheet goods, giving enough coverage for slight panel variation and routine overhang before trimming. The .018 inch thickness called out in the same description characterizes it as a thinner banding, so it is well suited to doors, drawer fronts, and carcass edges where a low-profile edge line is wanted instead of a bulky rim. The CP40817 LAC reference in the SAP text ties the banding to a particular decor, so fabricators working with that decor can carry the same appearance around corners and across multiple components. The 600 foot roll length described there supports runs of repeated parts, so production environments and serious DIY projects can process many linear feet without swapping rolls midstream.
The identification "Rehau ABS Edgebanding, 716041-137" ties the product to a specific manufacturer part number, so reordering the same edge appearance for future projects follows a consistent code-based process. The manufacturer part number 716041-137 itself is a fixed identifier, so job records and cut lists can reference it when documenting materials for service work or expansions. The SAP description "15/16X.018 CP40817 LAC 600FT" combines all core attributes into one string, so estimators can pull width, thickness, decor code, and roll length directly into planning documents. The .018 inch thickness stated there helps operators anticipate trimming behavior, so they can select knives and feed speeds appropriate for a thinner ABS band without unnecessary passes. The 15/16 inch width and 600 foot length, both declared in the SAP description, translate into predictable linear coverage, so yield calculations and cost per foot estimates stay tied to a known dimension and roll size.
Rehau ABS edgebanding 716041-137 is an ABS edge banding from Rehau, Inc., which is used to cover and finish exposed edges on panel-based cabinet, furniture, and casework components.
The 15/16 inch width listed in the SAP description gives coverage over typical 3/4 inch panels, allowing a slight overhang for trimming to a flush, clean edge line after bonding.
The .018 inch thickness described in the SAP text identifies a thin ABS edgebanding, which suits applications where a modest edge profile and lighter trimming passes are preferred on cabinet and furniture parts.
The CP40817 LAC code in the SAP description indicates a specific decor and surface type, so it helps match the edgebanding appearance with panels or fronts that carry the same decor identification.
The 600 foot length stated in the SAP description supports long edging runs, so multiple cabinet or furniture components can be processed continuously from one roll in production or large DIY projects.
The manufacturer part number 716041-137 and web reference RU716041-137 give consistent identifiers, so shops can specify and reorder the same Rehau ABS edgebanding for repeat work and matching future jobs.
This Rehau ABS edgebanding, identified by manufacturer part number 716041-137 and SAP description "15/16X.018 CP40817 LAC 600FT", combines defined width, thickness, decor code, and roll length, so it fits planning and documentation workflows around CP40817 LAC-based projects. The 15/16 inch by .018 inch format supports edging on standard panel builds where a thinner ABS profile is desired. For shops and serious DIY users working with that decor, choosing this specific Rehau ABS edgebanding keeps edge appearance and material codes aligned from project layout through installation.
Sold In: 1 Roll