Rehau ABS edgebanding 716041-144 15/16 x .018

Rehau ABS Edgebanding 716041-144 For Clean Edges

Rehau ABS edgebanding 716041-144 is ABS edge banding that finishes exposed panel edges while matching jobs built around the CP60405 designation. The 15/16 inch width covers typical 3/4 inch panels and the overhang gives room to trim back to a crisp edge. The .018 inch thickness keeps a low profile on cabinet parts and furniture components, so edges stay visually tight to the face material. The ABS construction provides a uniform, machinable edge that works well in common shop workflows. The 600FT length in the SAP description supports longer production runs or multiple projects without constant changeover. The specific manufacturer part number 716041-144 helps tie this banding to drawings, cut lists, or material schedules that call out this exact edge banding.

Key Rehau ABS Edgebanding Details That Matter

• Branded as Rehau ABS edgebanding, it aligns with projects that specify Rehau, simplifying sourcing when a particular supplier or performance history is required on cabinet or fixture work.
• The 15/16 inch dimension in the SAP description gives enough coverage over standard 3/4 inch substrates, allowing a small margin for flush trimming without exposing the core material.
• The .018 inch thickness stated in the SAP description creates a thin edge profile that helps parts stack smoothly and keeps a subtle transition at door and drawer fronts.
• The CP60405 LAC reference in the SAP description identifies a specific finish or design line, which supports visual coordination across doors, panels, and matching trim components.
• The 600FT length called out in the SAP description supports sustained runs on edgebanders, reducing downtime from frequent coil changes during repetitive cabinet or casework production.

Edgebanding Dimensions That Support Straightforward Fit

The SAP description 15/16X.018 CP60405 LAC 600FT signals a 15/16 inch wide ABS edgebanding sized for common 3/4 inch board work. That extra width is useful when trimming because it tolerates minor misalignment at application while still covering the substrate. The .018 inch thickness works well where a thinner edge is preferred, limiting the step between the banding and surface so doors and shelves sit neatly against adjoining parts. With 600FT available under this designation, shops can run door, drawer, and panel edges under one part number across a series of cuts.

Using Rehau 716041-144 ABS Edgebanding In Shop Work

Where This ABS Edge Banding Fits Best

This product is identified as Rehau ABS edgebanding in the edgebanding category, positioning it for cabinet, furniture, and general woodworking edge treatment. The 15/16 inch width in the SAP description covers exposed edges on case sides, shelves, and fronts cut from standard sheet goods. That coverage suits layouts where panels are nominally 3/4 inch thick but may vary slightly from batch to batch. The thin .018 inch profile supports applications where a lighter, less pronounced edge is preferred, such as modern cabinet fronts or fixture panels. The manufacturer part number 716041-144 lets estimators, engineers, and production staff reference the same banding on prints and pick lists, keeping material selection consistent from design through finishing.

Details That Help Maintain Consistent Edge Results

The 15/16X.018 dimension in the SAP description gives a predictable starting point for machine setup on edgebanders and trimmers. Operators can dial in trim heads knowing the banding will sit slightly proud of the core and finish down to a clean line. The ABS material classification supports repeatable cutting, trimming, and scraping because the banding is formulated for edge applications on woodworking components. The 600FT length associated with this part number supports extended runs under one setup, which helps keep edge quality and appearance uniform across multiple doors, drawer fronts, and panels within the same job.

Common Questions About Rehau ABS Edgebanding 716041-144

Select Rehau 716041-144 For Matched ABS Edges

Rehau ABS edgebanding 716041-144 ties the 15/16X.018 CP60405 LAC 600FT specification to a single, trackable part number for shop use. When a project calls out this exact Rehau ABS edgebanding, choosing this Wurth Baer Supply listing aligns material selection, edge appearance, and production planning under the same clearly defined edge banding.