Rehau ABS edgebanding is an ABS edge banding product designed to cover and finish exposed panel edges, so cabinet and furniture projects gain a clean, professional-looking perimeter instead of raw substrate. The product name Rehau ABS Edgebanding, 716041-152 identifies it as a Rehau, Inc. edge banding solution with manufacturer part number 716041-152, which ties directly to a consistent color and finish in the CP20733 LAC reference. The SAP description 15/16X.018 CP20733 LAC 600FT states that this roll is 15/16 inch wide and .018 inch thick, giving enough coverage to wrap typical board thicknesses while keeping a low-profile edge. The same description also specifies a 600FT length, which supports longer production runs or multiple installations without frequent roll changeovers.
The 15/16 inch width defined in the 15/16X.018 CP20733 LAC 600FT description gives installers workable overhang on common panel thicknesses, which helps trimming tools track accurately along the edge. The .018 inch thickness stated in the same description means the Rehau ABS edgebanding presents a relatively thin edge, so it transitions smoothly to the panel surface after trimming and light finishing passes. The 600FT length listed in the SAP description provides a single continuous run for many parts, which supports consistent feed settings on edgebanders and helps maintain uniform edge appearance from piece to piece.
The category Miscellaneous|Edgebanding and product class Edge Banding identify Rehau ABS edgebanding, 716041-152 as material used on exposed edges of laminated or finished panels in cabinetry and furniture. The 15/16 inch width from the 15/16X.018 CP20733 LAC 600FT description suits typical carcass and shelf thicknesses, so a single size can work across many components on a job. Because it is described as ABS edgebanding, the material is intended as an edge treatment rather than a structural element, letting panels carry the load while the banding defines the visual boundary. The CP20733 LAC reference in the SAP description ties edge appearance to a specific decor, which helps create continuous visual lines around doors, drawer fronts, and cabinet sides when panels use the matching finish. The 600FT length reduces interruptions on an edgebander, supporting consistent alignment from the first piece to the last in a run.
The 15/16X.018 CP20733 LAC 600FT SAP description consolidates the key working dimensions of this Rehau ABS edgebanding, so shop setup can be based on fixed, predictable measurements. The 15/16 inch width gives enough material to slightly overlap both faces of most boards, which helps trimming stations remove minor panel variation without exposing core material. The .018 inch thickness indicated in the same description keeps the edge slim, so edge radius tooling or light sanding can refine the transition without creating a pronounced ridge. The CP20733 LAC decor reference supports visual continuity between the edgebanding and matching surface materials, which matters when doors, drawer fronts, and cabinet frames meet in tight reveals. Finally, the 600FT roll length supports batching many similar components from one coil, helping keep feed tension and heat settings consistent on edge processing equipment across an entire cabinet set.
Rehau ABS edgebanding with a 15/16 inch width, as stated in the SAP description, covers standard panel edges with slight overhang, allowing clean trimming to a flush, professional edge.
Rehau ABS edgebanding at .018 inch thickness, specified in 15/16X.018 CP20733 LAC 600FT, creates a thin edge profile that blends smoothly into panel faces after trimming operations.
The CP20733 LAC code in the SAP description identifies a specific decor reference, helping match the Rehau ABS edgebanding to coordinating surfaces in cabinet and furniture projects.
This Rehau ABS edgebanding has a 600FT length, as stated in the SAP description, which supports long production runs and consistent edging settings across many components.
The manufacturer part number 716041-152 uniquely identifies this specific Rehau ABS edgebanding, tying together its width, thickness, decor reference, and roll length for accurate selection.
This item is classified under Miscellaneous|Edgebanding with product class Edge Banding, indicating it is intended for finishing exposed panel edges in cabinetry and furniture work.
Rehau ABS edgebanding, 716041-152 pairs a 15/16 inch width with .018 inch thickness and a 600FT length, as defined by the 15/16X.018 CP20733 LAC 600FT description, to support efficient cabinet and furniture edge work. The CP20733 LAC decor reference and clear manufacturer part number help maintain visual and material consistency across multiple jobs and repeat orders when finishing panel edges.
Sold In: 1 Roll