Rehau ABS edgebanding 716041-167 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so cut board edges present a uniform, professional look on cabinets, fixtures, and other casework using this specific color and surface.
The 15/16 inch width stated in the SAP description covers common 3/4 inch panel thickness with overhang, so installers can trim flush and leave a tight, consistent edge without exposed substrate on cabinet and furniture projects.
The .018 inch thickness defined in the SAP description provides a slim edge profile that blends closely with the panel face, helping projects match modern, low-bulk styling while still covering raw edges along long runs.
The CP20726 LAC designation in the SAP description identifies the particular finish and look of this banding, so repeat projects using the same reference can keep edge color and surface appearance aligned across multiple jobs or repairs.
The 600 ft length specified in the SAP description supplies a continuous roll suited to production or multi-piece work, allowing long edges and multiple components to be banded from the same run for consistent color and surface from part to part.
The Manufacturer Part # 716041-167 and the WBSC reference in the web description together give a clear ordering identity, so shops can specify this same Rehau ABS edgebanding when they need to match prior work or standardize material across crews.
The 15/16 inch width from the SAP description is slightly wider than typical 3/4 inch board thickness, so edgebanding machines and manual irons can place the banding with a small overhang that trims cleanly without exposing the core.
The .018 inch thickness defined in the SAP description keeps the edge profile slim, which helps maintain tight reveals at doors and drawer fronts where multiple banded edges align, supporting accurate layout when parts meet at corners.
The CP20726 LAC finish code in the SAP description identifies a repeatable look, so when shop drawings or job files carry this reference, installers can match the edge appearance to earlier sections of the same project.
The 600 ft length detailed in the SAP description gives a long, continuous run of ABS edge banding, helping edge banders minimize splices along visible stretches and maintain uniform color and surface across multiple components.
The ABS edge banding product class and the Rehau ABS Edgebanding name define this as an edge treatment for panels, so shops can use it on cabinet boxes, shelves, and fronts where raw board edges need a finished, color-consistent surface.
The 15/16 inch width stated in the SAP description suits edging for standard 3/4 inch casework material, giving enough coverage so both faces of the panel receive a secure bond line after trimming, which supports everyday cabinet construction layouts.
The .018 inch thickness listed in the SAP description fits projects requiring a subtle transition at the edge, so flat panel doors and modern fixtures can maintain clean lines when viewed from the front, even across long cabinet runs.
The ABS material referenced in the product name frames this banding for panel edging where a defined plastic edge is preferred, allowing fabricators to align it with ABS-focused machining, sanding, and finishing steps in their existing workflow.
The CP20726 LAC identifier from the SAP description points to a specific appearance that can be called out on project documentation, so different teams working on the same job can pull the same edge code and maintain visual consistency across phases.
The Manufacturer Part # 716041-167 from Rehau, Inc. gives a precise product reference, so shops can document this exact ABS edgebanding on cut lists and job files, then reorder the same material for service work or extensions to an installation.
The 600 ft length specified in the SAP description supports continuous feeding through edge banding equipment, helping operators run multiple cabinet parts from one roll and maintain the same CP20726 LAC finish from first piece to last.
The 15/16 inch by .018 inch dimensions defined in the SAP description create a known profile, so machine setups, pressure settings, and trimming expectations can be standardized around this size, improving repeatability across different batches and crews.
The ABS material identified in the product name suits workflows built around ABS edge banding, so tooling, heat settings, and post-trim finishing steps that are already dialed in for ABS can be applied to this specific Rehau 716041-167 product.
The WBSC - 1432 - RU716041-167 web description ties the product to Wurth Baer Supply, giving an internal reference that purchasing teams can use to align shop requests with the supplier record, supporting consistent sourcing for ongoing cabinet programs.
The Rehau, Inc. brand stated in the product data positions this ABS edge banding within a defined manufacturer line, allowing specifiers who already work with Rehau products to keep their edge treatment within the same brand family for project standardization.
Rehau ABS edgebanding 716041-167 has a 15/16 inch width and .018 inch thickness per the SAP description, which supports edging typical 3/4 inch panels with a slim, trimmable overhang.
The CP20726 LAC code in the SAP description identifies the specific finish and appearance of this ABS edge banding, helping projects repeat the same look across multiple jobs.
The Rehau ABS edgebanding 716041-167 is described as 600 ft in length, giving shops a continuous run suitable for edging multiple components in production work.
Rehau 716041-167 is identified as ABS edgebanding, so it provides an ABS plastic edge treatment compatible with ABS-focused trimming and finishing workflows.
ABS edgebanding 716041-167 is made by Rehau, Inc., giving shops a defined manufacturer reference when specifying materials in cabinet and woodworking projects.
Wurth Baer Supply uses the web description WBSC - 1432 - RU716041-167, aligning this Rehau ABS edgebanding with their internal catalog for straightforward ordering.
The Rehau ABS edgebanding 716041-167 from Wurth Baer Supply combines a 15/16 inch by .018 inch profile, CP20726 LAC finish code, and 600 ft roll length to support consistent edge treatment across casework, fixtures, and cabinetry using ABS edge banding.
Using the Manufacturer Part # 716041-167 and WBSC - 1432 - RU716041-167 references when planning projects helps align shop drawings, purchasing, and installation around this specific Rehau ABS edgebanding so finished edges remain consistent job to job.
Sold In: 1 Roll