Rehau ABS edgebanding 716041-168 is an ABS edge banding from Rehau, Inc. that finishes panel edges so exposed board is covered and protected on cabinets, fixtures, or furniture parts. The 15/16 inch width from the 15/16X.018 CP60223 LAC 600FT description gives enough coverage to cap common 3/4 inch panels while allowing trim margin, which supports cleaner flush-trimming in the shop. The .018 inch thickness from the same description creates a slim edge profile that blends with the panel face, which helps achieve a finished look without a bulky line at the edge. The ABS material identified in the name provides a consistent thermoplastic edge, which supports repeatable machining and finishing across multiple parts in a run. The 600FT length referenced in the description supplies a continuous run of edging, which reduces changeovers on larger cabinet or millwork jobs.
The 15/16X.018 CP60223 LAC 600FT description provides the working dimensions that matter when setting up an edgebander or handheld trimmer. The stated 15/16 inch width gives coverage past typical panel thickness, which allows the installer to run the banding slightly proud and then trim it back to flush in a controlled step. The .018 inch thickness keeps the edge banding thin enough that trimming tools handle it efficiently, which can help maintain sharp edges without leaving a heavy ridge at the panel perimeter. Because this product is identified as ABS edgebanding, it integrates into workflows designed around ABS edge material, which helps keep machine parameters and trimming techniques consistent across similar jobs.
The Category listing as Edgebanding and Edge Banding identifies this product for finishing raw panel edges on cabinetry, furniture, and similar woodworking projects, which keeps substrate edges covered where they are visible in the final installation. The 15/16 inch width from the 15/16X.018 CP60223 LAC 600FT description suits work with panels near 3/4 inch thick, which fits many cabinet sides, shelves, and case components used in the shop. The ABS material called out in the Rehau ABS Edgebanding name supports use on projects that are already specd for ABS edge banding, which keeps edge material consistent across doors, drawer fronts, and casework. The 600FT coil length in the description serves projects that require many repeated parts, which helps installers and fabricators run long sequences of panels without stopping to change edging material mid-job.
The .018 inch thickness referenced in 15/16X.018 CP60223 LAC 600FT gives a relatively thin edge, which helps trimming passes remove only a small amount of material and can support a smoother transition between edge and face. The 15/16 inch width from that same description provides built-in tolerance for slight panel variation, which allows operators to position the banding with some overhang and then bring it back flush without exposing the core. The ABS composition named in Rehau ABS Edgebanding offers a uniform thermoplastic surface, which lets cutting and flushing tools behave predictably across every length of edge in a production run. The manufacturer part number 716041-168 connects this coil directly to the Rehau, Inc. catalog, which supports repeat use of the same profile and color reference wherever this specific ABS edgebanding has been specified on drawings or project standards.
Rehau ABS edgebanding 716041-168 is an ABS edge banding from Rehau, Inc., which is used to cover and finish exposed panel edges on cabinetry, furniture, and similar woodworking components.
Rehau ABS edgebanding 716041-168 has a stated width of 15/16 inch in the 15/16X.018 CP60223 LAC 600FT description, which provides coverage beyond typical 3/4 inch panels for trimming back to a flush edge.
Rehau ABS edgebanding 716041-168 has a .018 inch thickness noted in the 15/16X.018 CP60223 LAC 600FT description, which yields a thin edge that trims easily and blends closely with the panel surface.
Rehau ABS edgebanding 716041-168 is described with 600FT in the 15/16X.018 CP60223 LAC 600FT text, which indicates a 600-foot coil useful for extended production runs.
Rehau ABS edgebanding 716041-168 is identified as ABS in the product name, which provides a thermoplastic edge suitable for machining and trimming with common edgebanding equipment.
Rehau ABS edgebanding 716041-168 uses manufacturer part number 716041-168, which links directly to the Rehau, Inc. reference for matching the same edging on repeat orders.
Rehau ABS edgebanding 716041-168 combines ABS material with a 15/16 inch width and .018 inch thickness, as detailed in 15/16X.018 CP60223 LAC 600FT, so cabinet and millwork shops can cover 3/4 inch panel edges and trim to a clean, consistent line. The 600FT coil length in the description supports longer production runs, which helps keep edge details uniform across a full job. Selecting this specific 716041-168 part number ties projects directly to the Rehau, Inc. ABS edgebanding reference, which supports consistent edge appearance when the same material is reordered for ongoing or repeat work.
Sold In: 1 Roll