Rehau ABS edgebanding 716041-171 is an ABS edge banding from Rehau, Inc. that finishes raw panel edges so cabinet, furniture, and fixture work presents with a consistent edge detail on exposed runs. The 15/16 inch width covers common 3/4 inch panel edges with margin, which supports flush trimming without exposing the core when equipment is set correctly. The .018 inch thickness keeps the edge profile lean, so doors and drawer fronts maintain tight reveals where clearance is limited. The CP60227 designation ties this edgeband to a specific color and texture match within the Rehau system, which matters when tying in replacement work or extending an existing project line. The LAC reference in the description identifies a lacquered-style finish, giving the edge a finished look that is ready to align visually with the specified surface. The 600 ft length supplies enough material for larger runs or multiple smaller jobs from a single roll.
This Rehau ABS edgebanding is sized at 15/16 inch wide, giving extra coverage beyond the face of 3/4 inch panels so trimming operations can bring the edge perfectly flush without leaving thin reveal lines. The .018 inch thickness keeps the edge profile slim, which helps maintain consistent reveals on doors, drawer fronts, and panel joints where every added layer affects alignment. Together, this width and thickness balance coverage and profile so cabinet shops and serious DIY users can run standard settings on most edgebanders and trim flush without overbuilding the edge. The defined CP60227 LAC finish spec supports visual alignment with matching Rehau surfaces, helping finished pieces look unified from panel face to edge detail on both new installs and follow-up work.
This Rehau ABS edgebanding sits in the Edge Banding product class and Edgebanding category, positioning it for cabinet, furniture, and general woodworking edge finishing where ABS is already part of the material spec. The 15/16 inch by .018 inch format suits most 3/4 inch casework, shelves, and fronts, giving fabrication shops one profile that can handle a broad range of standard panel applications. The ABS construction lines up with glue systems and machines tuned for ABS banding, so it slots into existing shop workflows without changes to core processes. The CP60227 LAC identification connects this band to a particular finish reference, which matters in commercial millwork or repeat residential programs where project specifications call out color or finish by code. With a 600 ft roll length, it supports room-scale or multi-unit runs from a single roll, which is useful in production, multi-cabinet installations, or coordinated fixture packages.
The defined 15/16 inch width gives a predictable amount of overhang past a 3/4 inch panel, which supports consistent trimming passes and reduces rework from under-coverage on slightly misaligned panels. The .018 inch thickness keeps the added build at the edge minimal, helping doors and drawers stay within their intended clearances when multiple banded parts meet at a joint. The ABS material identity means the banding behaves in a known way under typical heating and pressing conditions for ABS, so temperature and feed settings can stay in familiar ranges on edgebanders. The CP60227 LAC specification provides a reliable reference for matching the banding to coordinated materials, which is important when multiple shops, phases, or replacement runs all have to present the same edge appearance. Together, these defined characteristics help keep edge finishing repeatable across jobs, from first install through later additions that use the same Rehau code.
Rehau ABS edgebanding 716041-171 is specified at 15/16 inch width and .018 inch thickness, giving overhang for trimming while keeping the edge profile slim on finished panels.
The CP60227 LAC description identifies a specific finish and color reference for this Rehau ABS edgebanding, supporting visual matching across cabinets, panels, and future replacement work.
This Rehau item is listed in the Edge Banding product class and Edgebanding category, positioning it for use as edge treatment on cabinet, furniture, and woodworking panels.
Rehau 716041-171 is identified as ABS edgebanding, aligning it with ABS-focused glue systems and edgebanding equipment commonly used in cabinet and millwork shops.
This Rehau edge banding is described with a 600 ft length, giving enough continuous material to run larger cabinet or fixture projects from one roll.
The 716041-171 manufacturer part number uniquely identifies this specific Rehau ABS edgebanding, which supports consistent reordering and coordination with project documentation.
Rehau ABS edgebanding 716041-171 ties specific dimensions, material, and finish coding into one defined product, so panels, doors, and casework can share a consistent edge detail across a project. The 15/16 inch by .018 inch format supports common 3/4 inch constructions while keeping reveals controlled. The CP60227 LAC reference anchors the visual spec, and the 600 ft length suits both shop production and serious DIY runs. For work that needs repeatable ABS edge treatment tied to a clear part number, this Rehau edgebanding aligns with that requirement from start to finish.
Sold In: 1 Roll