Rehau ABS edgebanding 716041-174 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges on woodworking projects, so cabinet and furniture parts move from raw board to a uniform, professional-looking edge. The product is identified as edge banding in the edgebanding category, which positions it as a trim solution around casework, shelving, and similar components where a banded edge is needed instead of a visible core. The SAP description lists CP60232 and LAC, tying this banding to a specific color and finish reference that helps installations match existing layouts that use the same designation. The 15/16 inch width stated in the SAP description gives coverage that overlays typical panel thicknesses and allows a small overhang for trimming. The .018 inch thickness balances flexibility and a defined edge, supporting consistent trimming and scraping without feeling bulky on the workpiece.
The SAP description lists this Rehau ABS edge banding as 15/16 inch wide, so it covers common panel thicknesses while leaving a trim margin that can be flush-routed or trimmed after bonding. The .018 inch thickness in the description keeps the material relatively thin, helping it follow straight edges and modest curves without fighting the substrate during application. The ABS material is identified in the product name, so the banding pairs with application processes and trimming tools typically used for ABS edging in cabinet shops. The 600FT length in the SAP description supports repeated installation steps across many parts in a single run, so operators can stay at the machine longer without switching to another coil of the same specification.
The product is classified as edge banding in the edgebanding category, so it is intended for covering exposed edges on panels, cabinet parts, and similar components in woodworking. The 15/16 inch width from the SAP description suits edges on typical casework where the banding needs to straddle the panel and give a small overhang. That overhang allows trimming tools to clean the edge back to the face for a flush transition, which supports a neat finished line on cabinet sides, doors, and shelving. The ABS material identified in the name makes this banding suitable for applications that align with standard ABS edgebanding processes, such as use on melamine or laminate-faced panels where a thermoplastic edge is preferred. The CP60232 designation gives a consistent visual reference, which is useful on runs of cabinetry where every exposed edge needs the same tone or pattern to tie doors, drawer fronts, and cases together visually.
The .018 inch thickness listed in the SAP description supports predictable trimming and scraping without creating a heavy step at the edge, which helps finished parts stack and align cleanly in assemblies. That thickness also gives machine operators a familiar feel under the cutter head, which supports repeatable feed speeds and trim passes on production equipment already dialed for similar ABS edging. The 600FT length in the SAP description lets shops process many parts from the same coil, which maintains color and finish consistency across an entire project tied to the CP60232 LAC specification. The manufacturer part number 716041-174 and the SAP description together give a precise reference for reordering, so when a shop locks in settings for this exact banding, they can repeat the same results by using the same identifiers on future jobs.
Rehau 716041-174 is ABS edge banding in the edgebanding category, so it is used to cover exposed panel edges on cabinets, furniture, and other woodworking components.
The SAP description lists the banding as 15/16 inch wide, giving coverage that spans common panel thicknesses with enough overhang for flush trimming after application.
The SAP description specifies a .018 inch thickness, which provides a slim edge that trims cleanly while still offering enough material for finishing passes.
The SAP description lists CP60232 LAC, tying this banding to a specific color and finish reference that helps match other components ordered to the same designation.
The SAP description notes 600FT, providing a long run suitable for multiple cabinets or casework sections without changing to another coil of the same specification.
This ABS edge banding is manufactured by Rehau, Inc., so it aligns with other Rehau edgebanding products identified by similar part number and SAP description formats.
The Rehau ABS edgebanding 716041-174 pairs a 15/16 inch width with a .018 inch thickness, giving shops a known size for panel edges that suits common cabinet and furniture components. The CP60232 LAC reference in the SAP description links color and finish across projects, so repeating a design standard becomes straightforward when every edge uses the same specification. With a 600FT length and a clear manufacturer part number, this edge banding supports repeatable setups and reorders for ongoing production or matching future work to existing installations.
Sold In: 1 Roll