Rehau ABS edgebanding 716041-177 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so cut boards present a clean, uniform band instead of raw substrate, which supports a more professional result on cabinets and fixtures. The product is identified as edge banding, so it is designed to cover and protect the edge of sheet goods, helping the edge resist everyday contact in typical woodworking environments. The 15/16 inch width described in the SAP line gives coverage across common 3/4 inch panels with a small overhang, allowing trimming back to a tight, flush line. The .018 inch thickness noted in the SAP description keeps the banding relatively thin, which helps the edge transition feel smooth to the touch on doors, drawer fronts, and casework.
The 15/16 inch width in the SAP description gives coverage that extends beyond a typical 3/4 inch board, which lets installers center the strip and then trim each side for a crisp, even edge. The .018 inch thickness keeps the material relatively flexible, so it conforms along straight edges on cabinet components and helps the edge feel less bulky once trimmed. Because the category and product class both identify this as edgebanding, it is intended to be applied along exposed board edges, supporting a consistent finished line wherever a panel edge would otherwise show core material.
The product category and class identify Rehau ABS edgebanding 716041-177 as edgebanding for woodworking applications, so it suits cabinet shops and serious DIY projects that use sheet goods with visible edges. The ABS material referenced in the product name makes this banding appropriate wherever a plastic-based edge is preferred over wood, such as contemporary casework or commercial fixtures that call for a uniform, manufactured look. The 15/16 inch width from the SAP line supports work on panels around 3/4 inch thick, giving a bit of overhang on each side so edges can be trimmed flush after bonding. The 600 ft length in the SAP description supports runs where many edges must be finished with the same material, such as kitchens, banks of closets, or matching shop-built furniture, without needing frequent roll changes between parts.
The .018 inch thickness documented in the SAP description means this ABS edge banding creates a lean edge profile that transitions gently from face to edge, which helps routing and scraping leave a smooth line without a pronounced ridge. The 15/16 inch width again contributes to repeatable results by allowing a bit of centering tolerance during application, so slight placement differences can be cleaned back to the same final width. Because the manufacturer part number 716041-177 and the Rehau, Inc. brand are specified, shops can repeatedly source the same ABS edgebanding for follow-up jobs or replacement parts, keeping color and texture aligned with earlier work that used the same reference. The 600 ft roll length described in the SAP data further supports consistent workflow on production-style jobs, reducing interruptions that can occur when switching to another roll or material mid-run.
Rehau ABS edgebanding 716041-177 is an ABS edge banding classified as edgebanding, so it is used to cover and finish exposed panel edges on cabinets, casework, and similar woodworking projects.
The SAP description lists the edgebanding as 15/16 inch wide, giving coverage that extends past typical 3/4 inch panels so edges can be trimmed back to a clean, flush finish.
The SAP description specifies a thickness of .018 inch, providing a relatively thin band that creates a subtle transition between the panel face and the finished edge.
The SAP description notes a length of 600 ft, allowing multiple cabinets or larger runs of parts to be edged from a single roll for consistent appearance.
The product name identifies it as ABS edgebanding, meaning the strip is made from ABS, providing a plastic-based edge surface along panel borders.
The manufacturer part number 716041-177 clearly ties this Rehau ABS edgebanding to the same reference in documentation or prior jobs, supporting consistent reorders.
Rehau ABS edgebanding 716041-177 from Wurth Baer Supply combines a 15/16 inch width, .018 inch thickness, and 600 ft length to support edging multiple 3/4 inch panel projects with one consistent ABS band. Using the specific Rehau part number 716041-177 aligns new work with jobs already specified with the same edgebanding, helping cabinet shops and serious DIY users keep edge appearance uniform across doors, sides, and shelves.
Sold In: 1 Roll