Rehau ABS edgebanding 716041-211 is an ABS edge banding from Rehau, Inc., so it gives cabinet and furniture panels a finished edge that matches your layout and protects exposed board edges in everyday use. The product is categorized as edgebanding and edge banding, which means it is intended specifically for covering raw panel sides in woodworking and casework projects. The SAP description lists 15/16 x .018, so the banding is sized for edging standard panel thicknesses with a slim, low-profile edge that sits neatly at the panel face. The same description shows a 600FT length, giving you a continuous roll suited to longer runs and repeat work on the same project. The manufacturer part number 716041-211 and WBSC reference ensure you can reorder exactly the same banding when matching existing installations.
The 15/16 x .018 sizing in the SAP description means this Rehau ABS edge banding lays slightly proud of common 3/4 inch panels, giving enough margin for trimming tools to clean the edge without cutting into the substrate. The narrow .018 inch thickness produces a subtle edge line at door and panel fronts, so routed or trimmed edges stay visually tight to the surface. With a 600FT roll length documented in the description, installers can run multiple cabinet sections or full room sets from the same coil, keeping the setup time consistent from piece to piece during edgebanding operations.
This Rehau ABS edgebanding, classified as edgebanding and edge banding, is suited to covering raw edges on cabinet parts, shelving, and similar panel-based constructions where a clean finished perimeter is required. The 15/16 inch width supports use on standard casework built from common sheet goods, giving enough coverage to handle minor sheet size variations while still trimming back to a precise line. With a length of 600FT indicated in the SAP description, the product works well on projects that involve repeated parts, such as banks of cabinet doors or multiple closet sections, because the same roll can be used throughout. The defined manufacturer part 716041-211 lets shops specify this exact banding when they need consistent edge appearance from one run to the next.
The 15/16 inch width in the SAP description provides a small overhang beyond a typical 3/4 inch panel, giving edge banders and trimmers just enough material to cut back to a clean, straight edge without exposing the core. The .018 inch thickness combines a light edge with defined coverage, so applied pieces sit close to the face material and keep the transition line tight around doors and panels. Because the roll is specified at 600FT, operators can set up feed and trimming stations once and run many parts consecutively, helping maintain consistent edge reveal from the first component to the last on a given order. The clear Rehau branding and part number 716041-211 on this ABS edge banding simplify matching previous installations that already use this specific banding size.
Rehau ABS edgebanding 716041-211 has a listed width of 15/16 inch, so it covers standard 3/4 inch panel edges with a controlled overhang for trimming to a flush, finished edge.
This Rehau ABS edge banding has a stated thickness of .018 inch, which creates a slim edge profile that blends closely with adjacent panel surfaces after trimming.
The SAP description lists a 600FT length, so one roll can cover multiple cabinets or large runs of shelving while keeping edge appearance consistent throughout the project.
The product name identifies this as ABS edgebanding, providing a synthetic edge surface that creates a uniform, finished look along exposed panel sides.
The 15/16 inch width gives slight overhang on typical 3/4 inch panels, allowing trimming tools to remove excess while leaving a clean edge without cutting into the substrate.
The 716041-211 part number uniquely identifies this Rehau ABS edgebanding, allowing shops and installers to specify and reorder the same edge treatment across jobs.
This Rehau ABS edgebanding 716041-211 from Wurth Baer Supply combines 15/16 inch width, .018 inch thickness, and a 600FT roll length to support efficient edge finishing on panel-based projects. The defined manufacturer part and edgebanding classification help align specifications between design, purchasing, and installation teams. For work that repeats the same panel sizes and finishes, this single ABS edge banding size provides a consistent solution across cabinets, shelves, and other casework elements.
Sold In: 1 Roll