Rehau ABS edgebanding 716041-254 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so they match the surface visually and protect the board edge in daily use. The 15/16 inch width covers standard panel thickness with a small overhang that can be trimmed for a flush, professional-looking edge on cabinets and casework. The .018 inch thickness keeps the edge slim, which is useful when a tight, low-profile edge detail is important on doors, drawer fronts, and shelves. The CP60211 LAC reference in the description identifies the specific decor and finish family, helping match this banding to the correct surface design in a project lineup. The 600 ft length supports longer runs and multiple cabinets from a single roll, which reduces job interruptions during production work.
This Rehau ABS edge banding uses a 15/16 inch width, giving panel builders enough coverage across standard board thickness while still leaving manageable excess for trimming along both faces. The .018 inch thickness keeps the material easy to process on typical edge banders and trimmers without creating a bulky edge, which is important where doors and drawer fronts must align closely. The ABS material type aligns with ABS-oriented machine settings, so feed pressures and trimming profiles can be chosen to suit a consistent plastic substrate. The CP60211 LAC reference and manufacturer part number 716041-254 provide clear identification on order sheets and shop labels, helping production teams pull the exact same edge material for repeat jobs and replacements.
This Rehau, Inc. ABS edgebanding is categorized under Miscellaneous and Edgebanding, placing it in the edge finishing step of cabinet and woodworking projects. The 15/16 inch width works well on typical casework and cabinet components cut from sheet goods, where the band must cover the full thickness and still allow for a slight trim pass. With the .018 inch gauge, the edge profile stays modest, which suits frameless cabinet doors, drawer fronts, and interior shelves that need a refined look rather than a heavy edge. The CP60211 LAC identifier aligns this banding with a specific surface design reference, giving shops a reliable way to match it to corresponding decorative panels when building coordinated installations. The 600 ft run length supports shop environments where multiple cabinets, closets, or fixtures are processed in sequence using the same color and finish.
The combination of 15/16 inch width and .018 inch thickness defines how this ABS edge banding behaves at the machine and on the finished part. A width just under 1 inch allows the band to be centered on standard board edges with enough margin for post-trimming, which helps reduce visible glue lines or uneven overhangs after machining. The thinner .018 inch construction means the edge transitions smoothly from band to panel surface, which is valuable when doors must sit close together and still look consistent across an installation. The manufacturer part number 716041-254 ties all of these attributes together in ordering systems, so production teams can repeat successful setups and color matches on future projects without requalifying a different band. The CP60211 LAC designation further distinguishes this roll within Rehau's offering, which supports precise selection when a project specification calls out that exact decor reference.
Rehau 716041-254 is an ABS edge banding from Rehau, Inc. used to finish exposed edges on panel-based cabinetry and woodworking components.
This edge banding is specified as 15/16 inch wide and .018 inch thick, giving coverage for standard panels while keeping a slim edge profile after trimming.
The product description calls out a 600 ft length, supporting longer production runs or multiple cabinet jobs using the same color and finish.
The CP60211 LAC designation identifies a specific decor and finish family, helping match this ABS edge banding to corresponding surface designs.
The .018 inch thickness keeps the edge banding low profile, which supports tight reveals and a refined look on cabinet doors and drawer fronts.
Manufacturer part number 716041-254 uniquely identifies this Rehau ABS edgebanding, supporting accurate reordering and consistent material selection for repeat work.
This Rehau ABS edgebanding 716041-254 pairs a 15/16 inch width with a .018 inch thickness and CP60211 LAC decor reference, giving cabinet shops a clearly defined edge solution for matching panels. The 600 ft length supports production-oriented workflows where a single material is applied across many parts. Selecting this specific manufacturer part number lets teams repeat successful jobs with the same ABS banding, color reference, and processing behavior across future projects.
Sold In: 1 Roll