Rehau ABS Edgebanding 716041-276 For Clean Panel Edges

Rehau ABS edgebanding 716041-276 is an ABS edge banding from Rehau, Inc. that covers and finishes exposed board edges, giving casework and furniture projects a defined edge profile. The 15/16 inch width spans standard panel thicknesses with a small overhang to trim, so fabricators can flush the edge to the surface after bonding. The .018 inch thickness keeps the edge visually neat while limiting buildup at doors and drawer fronts that need tight reveals. The CP21052 LAC designation in the SAP description 15/16X.018 CP21052 LAC 600FT identifies this specific color and surface combination, supporting consistent appearance when repeating a job or matching existing work. The 600FT length in the SAP description serves long production runs or multiple cabinets from a single roll, reducing changeovers on edgebanding equipment during cutting and application.

Key Rehau ABS Edgebanding Details For Shop Use

• The 15/16 inch width stated in the SAP description 15/16X.018 CP21052 LAC 600FT allows slight edge overhang on common panel thicknesses, so installers can trim back to a clean, square edge after bonding.
• The .018 inch thickness in the SAP description controls the build at edges, which helps doors, drawer fronts, and panels maintain close reveals when this Rehau ABS Edgebanding, 716041-276 is applied.
• The ABS edge banding construction listed under Product Class supports a solid plastic edge, so routed or trimmed edges present a continuous material rather than a layered look at the cut line.
• The manufacturer part number 716041-276 ties this Rehau ABS edgebanding to a specific finish, which helps shops repeat projects with the same visual result across different production runs.
• The 600FT length in the SAP description helps production environments feed longer runs of edge work without frequent roll changes, which supports steadier workflow on edgebanding stations.

Edgebanding Dimensions That Support Straightforward Application

The 15/16 inch width stated in the SAP description lets fabricators center the Rehau ABS Edgebanding, 716041-276 over board edges with a controlled overhang, making trimming operations more predictable. The .018 inch thickness noted in the same description keeps the edge slim, so cutters and trimmers remove less material while bringing the edge flush, which can help maintain laminate or veneer surfaces during finishing passes. As an ABS edge banding product, it presents a single, uniform material at the edge, so trimming knives and routers engage consistent stock from start to finish along the run. The 600FT length described in the SAP data supports feeding multiple parts from one roll, which helps keep set-ups stable during application and reduces interruptions while edging cabinet components.

How This Rehau ABS Edge Banding Fits Shop Workflows

Where Rehau ABS Edgebanding 716041-276 Is Typically Applied

This Rehau ABS Edgebanding, 716041-276 is listed under the Edgebanding category at Wurth Baer Supply, so it is intended for covering raw board edges on casework, shelving, and cabinet components where a finished edge is required. The 15/16X.018 dimensions in the SAP description 15/16X.018 CP21052 LAC 600FT align well with panels near 3/4 inch thickness, giving fabricators enough material to trim for a crisp edge on furniture or cabinet sides. The ABS edge banding product class means that once bonded, the edge presents a plastic face, suitable for projects built around ABS-based edge finishes. The specific CP21052 LAC reference in the SAP description identifies a particular look, so shops can apply this edgeband when a job specifies that exact Rehau finish across visible cabinet and furniture edges.

Why The Dimensions And Part Number Matter For Results

The manufacturer part number 716041-276 links directly to this Rehau ABS edgebanding specification, which helps purchasing and production use the same material every time a drawing or job ticket calls for that code, keeping finished edges consistent. The 15/16 inch width and .018 inch thickness in the SAP description 15/16X.018 CP21052 LAC 600FT guide tooling set-ups, because operators can size trimming heads and edge guides knowing the banding sits just over panel faces without excessive excess. The ABS edge banding classification signals that cutting, trimming, and scraping operations work against a homogeneous plastic edge, which supports repeatable passes along straight runs and around cabinet parts. The 600FT length stated in the SAP description provides ample material for repeat jobs, helping shops run multiple cabinets or full room sets with the same lot of Rehau ABS edgebanding 716041-276.

Common Questions About Rehau ABS Edgebanding 716041-276

Select Rehau ABS Edgebanding 716041-276 For Specified Jobs

Rehau ABS Edgebanding, 716041-276 from Wurth Baer Supply ties a defined 15/16X.018 size and CP21052 LAC finish to a single manufacturer number, giving shops a repeatable choice when a drawing or specification calls out this exact edge banding. The ABS edge banding construction and 600FT length in the SAP description 15/16X.018 CP21052 LAC 600FT support continuous edging on cabinet or furniture components that rely on this specific Rehau appearance. For projects that reference 716041-276, this listing provides the identified Rehau ABS edgebanding in the stated dimensions for consistent edge treatment across panels.