Rehau ABS edgebanding 716041-294, 15/16 x .018

Rehau ABS Edgebanding 716041-294 For Clean Panel Edges

Rehau ABS edgebanding 716041-294 is an ABS edge banding from Rehau, Inc. that covers and finishes raw panel edges, giving casework, cabinetry, and fixtures a defined, uniform edge line. The ABS material provides a consistent edge surface that supports dependable trimming and finishing on woodworking projects. The 15/16 inch width gives coverage for standard panel thicknesses with a small overhang, allowing flush trimming for a straight, professional edge. The .018 inch thickness works well in applications where a thin, tight edge is preferred, helping panels maintain a clean visual profile without a bulky edge. The CP41533 reference in the description identifies a specific design or match point within the Rehau program, supporting repeat use on projects that need the same appearance. The EMB LAC notation designates an embossed, lacquer-type surface, which gives the edge banding a textured, finished look that aligns with decorative panel faces.

Key Rehau ABS Edgebanding Details For Projects

• The 15/16 inch width provides coverage across typical panel edges with slight overhang, so installers can trim back to a clean, flush line on cabinets, shelves, and casework.
• The .018 inch thickness keeps the edge banding relatively thin, which supports tight-radius corners and crisp visual edges where a low-profile band is preferred over heavy edge stock.
• The ABS construction defines a stable thermoplastic edge material, which works well in woodworking environments where a predictable trim and machining response is important.
• The CP41533 designation ties this edgebanding to a specific decor reference, helping shops repeat the same edge look across multiple jobs that share this design code.
• The EMB LAC notation indicates an embossed, lacquer-style surface, giving the banding a textured, finished appearance that coordinates with matching decorative surfaces.
• The 600FT length stated in the description identifies a long run source, which supports production environments that band many parts with the same material before reloading.

Edgebanding Size And Surface Details For Installation

This Rehau ABS edge banding uses a 15/16 inch width that supports edge coverage on common panel builds, providing enough material for trimming operations after bonding. The .018 inch thickness keeps the profile slim, which helps during routing and scraping steps where installers want minimal material to remove. The EMB LAC description flags an embossed lacquer-type face, giving the band a finished surface that visually ties into complementary panel designs. The ABS composition provides a defined material type for shops that standardize their edgebanding processes around ABS characteristics.

Using Rehau 716041-294 Edgebanding In Shop Work

Where This ABS Edgebanding Fits Best

The Rehau ABS edgebanding 716041-294 is positioned in the edgebanding category, making it suitable anywhere a raw board edge needs to be covered with a decorative edge. The 15/16 inch width aligns with many cabinet and casework panel thicknesses, so it serves well on doors, drawer fronts, and shelving that match this size range. The .018 inch thickness suits projects where a lean edge profile is desirable, such as modern-style cabinetry or fixtures that use slim fronts and visible panel edges. The CP41533 code ties the banding to a specific decor family, supporting environments that run coordinated panel and edge programs for consistent looks across jobs. The EMB LAC embossed lacquer surface helps this banding visually integrate with textured or lacquer-finished faces that share the same design reference.

Details That Support Repeatable Edgebanding Results

The 15/16 inch width on this ABS edge banding leaves manageable excess beyond a standard panel face, which helps installers trim consistently without large overhangs that slow routing and scraping. The .018 inch thickness keeps the material light at the edge, aiding tools in cutting cleanly and supporting fine edge detail where flush alignment is critical. The ABS material type gives shops a known thermoplastic to run with established heat and trimming routines, helping maintain uniform edges across runs. The CP41533 decor reference and EMB LAC surface description let project planners call out the exact banding needed whenever this specific embossed lacquer look is required, supporting accurate reorders and consistent edges on repeat projects. The 600FT length described in the SAP text further supports production workflows by offering extended runs before a coil change, which is valuable on large batches.

Common Questions About Rehau ABS Edgebanding 716041-294

Select Rehau ABS Edgebanding 716041-294 For Matching Edges

Rehau ABS edgebanding 716041-294 combines a 15/16 inch width, .018 inch thickness, ABS construction, and the CP41533 EMB LAC decor reference to support consistent, matched edges on cabinetry and panel projects. Use this specific code when projects call for the same embossed lacquer appearance across multiple runs.