Rehau ABS edgebanding 716041-299, 15/16 x .018, 600FT

Rehau ABS Edgebanding 716041-299 For Finished Edges

Rehau ABS edgebanding 716041-299 is an ABS edge banding product from Rehau, Inc. that provides a finished edge on qualifying panel projects. The SAP description states 15/16X.018 CP60301 EMB LAC 600FT, which identifies this as 15/16 inch wide, .018 inch thick edgebanding supplied in a 600 foot length for extended runs. The CP60301 EMB LAC designation describes an embossed lacquer surface, giving the edge banding a textured, lacquered appearance that supports visual consistency across exposed panel edges. As an edge banding classified under Miscellaneous|Edgebanding, this material is suited for applications where raw panel edges need to be concealed and visually matched, helping projects present clean edges along doors, drawer fronts, and casework components.

Key Rehau ABS Edge Banding Worksite Advantages

• The 15/16 inch width from the 15/16X.018 CP60301 EMB LAC 600FT description covers typical 3/4 inch panel edges with overhang, allowing trimming for a flush, accurate edge on casework and fronts.
• The .018 inch thickness noted in the SAP description supports a slim edge profile, which helps maintain clean lines on doors and panels while keeping routine trimming efficient.
• The 600 foot length identified in the SAP description lets shops run multiple cabinets or a full job from one roll, reducing roll changes and helping maintain consistent appearance across all parts.
• The CP60301 EMB LAC designation indicates an embossed lacquer surface, providing a textured, lacquered look that supports a coordinated finish on exposed edges.
• The ABS material type referenced in the product name positions this edgebanding for typical woodworking environments where thermoplastic edges are preferred on furniture or cabinetry.

Edgeband Dimensions That Support Straightforward Application

The 15/16 inch width of this Rehau ABS edge banding, as specified in the 15/16X.018 CP60301 EMB LAC 600FT description, gives enough coverage to span standard panel thicknesses while leaving trim allowance, aiding in precise edge flush trimming. The .018 inch thickness stated in the same description keeps the banding relatively thin, which benefits edgebanding machines and trimmers by limiting excess material at corners. The 600 foot length documented in the SAP description supports continuous feeding through automatic banders or extended manual runs, reducing downtime between coils and keeping production flow steadier during cabinet and fixture builds.

Where Rehau ABS Edgebanding 716041-299 Fits Best

Using 15/16 x .018 CP60301 EMB LAC On Panels

The category designation Miscellaneous|Edgebanding and the product class Edge Banding show that Rehau ABS edgebanding 716041-299 is intended for edging panel products rather than structural framing. The 15/16 inch width from the SAP description aligns with edging typical casework components such as cabinet sides, shelves, doors, and drawer fronts where a slightly oversized band is trimmed back. The .018 inch thickness, also stated in the description, creates a relatively low-profile edge, which suits applications aiming for modern, square-edged panel work. The CP60301 EMB LAC wording indicates an embossed lacquer surface, positioning this edgebanding where a textured, lacquer-style visual is desired along exposed edges, such as in commercial fixtures, residential cabinetry, or furniture elements that present to the user.

Details That Help Maintain Consistent Edge Results

The 600 foot length identified in the 15/16X.018 CP60301 EMB LAC 600FT SAP description allows fabricators to process many components from one continuous roll, supporting consistent color and surface look throughout a project. The 15/16 inch width offers extra coverage over common 3/4 inch substrates, which helps achieve repeatable trimming margins on automated banders and handheld trimmers. The .018 inch thickness helps limit the material lip at corners, reducing the amount of finishing work needed to blend edges. As an ABS edge banding from Rehau, Inc., the product identity provides a defined material type and manufacturer reference for shops that standardize on specific edgebanding lines, supporting repeat ordering and matching across multiple jobs. The manufacturer part number 716041-299 further anchors this specific color and surface configuration in purchasing and production records, helping maintain continuity when projects are repeated or expanded.

Common Questions About Rehau ABS Edgebanding 716041-299

Select Rehau ABS Edgebanding 716041-299 For Your Next Run

Rehau ABS edgebanding 716041-299 combines a 15/16 inch width, .018 inch thickness, and a 600 foot length, as detailed in the 15/16X.018 CP60301 EMB LAC 600FT description, to support extended edging runs on cabinet and panel projects. The CP60301 EMB LAC embossed lacquer surface provides a defined textured, lacquered appearance for exposed edges. With its clear product classification as Edge Banding from Rehau, Inc., this ABS edgebanding suits shops looking to apply a consistent, identified material across current and repeat projects.