Rehau ABS edgebanding 716041-309 is ABS edge banding that covers and protects raw panel edges, which helps deliver a finished look on cabinetry and casework using this specific Rehau color and finish reference. The 15/16 inch width gives coverage across typical 3/4 inch panel edges, so installers have a bit of lateral tolerance to trim back to a crisp, straight edge. The .018 inch thickness provides a low-profile edge, so the transition from face material to edgeband stays subtle on doors, drawer fronts, and shelves. The ABS material matches projects that are already using ABS-based edging, which supports consistent machining behavior during trimming and routing. The CP41544 EMB LAC code identifies a defined texture and lacquered appearance, which matters when tying this banding into a coordinated panel or door program that calls out that surface reference. The 716041-309 manufacturer number lets shops reorder the same banding for repeat jobs.
The 15/16 inch width on this Rehau edge banding gives fabricators room to position the band slightly proud of the substrate edge, so trimming tools can bring it down flush without exposing core material. The .018 inch thickness keeps the edge lean, which helps doors and drawer fronts stay visually balanced while still gaining full edge coverage. The combination of ABS material and this thickness works well with standard edgebanding trimmers, so operators can run continuous passes along cabinet parts. The defined CP41544 EMB LAC reference keeps the surface consistent from piece to piece, which matters when multiple cabinets or panels are lined up in the same room.
This Rehau ABS edge banding is a 15/16 inch wide, .018 inch thick band designed for edging panel-based components where an ABS edge is specified. The width suits typical 3/4 inch sheet goods used in cabinetry and casework, letting installers apply the band with a slight overhang that can be trimmed back. The 600FT roll length supports edging multiple cabinet boxes, shelves, or fronts in a production run, which helps keep color and surface appearance consistent across an entire room or project. The CP41544 EMB LAC description and 716041-309 part number allow shops to match this banding with panel programs or cut lists that reference the same identifiers, which helps keep design intent intact from ordering through installation.
The .018 inch thickness of this ABS edgebanding provides enough material to cover the panel edge while staying thin enough for a clean, low-step transition after trimming. This thickness pairs well with standard trimming tools, supporting smooth passes without excessive material removal. The 15/16 inch width offers installers working tolerance on both sides of a 3/4 inch edge, which is useful when edging parts cut from different panel batches within the same job. The ABS composition keeps all edges within the project on the same base material when ABS is specified, which simplifies routing and finishing sequences. With the 600FT roll, shops can plan longer edging runs from a single color and texture reference, reducing visual breaks between cabinets or panels that share the 716041-309 specification.
Rehau ABS edgebanding 716041-309 is 15/16 inch wide and .018 inch thick, which suits edging on typical 3/4 inch panel stock while keeping a low edge profile after trimming.
This edgebanding is supplied in a 600FT roll, allowing shops to run multiple cabinet or casework components from one lot, which supports consistent color and surface across a project.
The CP41544 EMB LAC description identifies a specific surface and lacquer reference for this ABS edgebanding, helping match it to panel or door programs using the same coded finish.
This product uses ABS material, so it aligns with projects already specified for ABS edgebanding, helping maintain consistent machining and trimming behavior across all edged parts.
The 15/16 inch width gives slight overhang on 3/4 inch panels, letting installers trim the ABS edgebanding back to a flush, clean edge without exposing the core.
The 716041-309 manufacturer part number uniquely identifies this Rehau ABS edgebanding, supporting accurate reordering when a project or spec calls out this exact edge banding.
This Rehau ABS edge banding in 15/16 inch by .018 inch dimensions gives shops a defined solution when a project calls out the 716041-309 reference. The CP41544 EMB LAC description and 600FT roll length support coordinated, repeatable edging work on cabinetry and casework using ABS material. For projects built around this specific Rehau edgeband color and surface, choosing this part number keeps dimensions, material, and finish aligned from the cut list to final installation.
Sold In: 1 Roll