Rehau ABS Edgebanding 716041-310 15/16 x .018

Rehau ABS Edgebanding For Clean Panel Edges

Rehau ABS Edgebanding gives you a dedicated edge banding solution from Rehau, Inc. for finishing panel and board edges on woodworking projects where a matching ABS edge is required. The 15/16 inch width covers typical board thicknesses while allowing a small trim margin, so installers can flush-trim to the face without starving the edge. The .018 inch thickness keeps the banding low-profile on the edge, which helps maintain a clean transition from face material to edge and supports a consistent finished look across multiple panels. The CP41542 reference in the description identifies the specific color or decor family this roll belongs to, helping shops keep color and pattern alignment consistent on repeat jobs. The 600FT length is sized for production or multi-piece runs, so cabinet and casework shops can run a job or series of jobs from one continuous roll with fewer changeovers during edgebanding.

Key Edgebanding Details That Support Your Work

• The 15/16 inch width gives enough coverage over standard panel thicknesses, so you have trimming allowance while still hiding the substrate edge cleanly on cabinets, shelving, or casework runs.
• The .018 inch thickness keeps the ABS profile slim on the edge, which helps the banding sit tight to the substrate and supports a more seamless transition from the face material to the treated edge.
• The CP41542 designation in the description defines the specific design line of this banding, helping you match this roll to other CP41542 jobs so finished parts hold a consistent visual across multiple components.
• The 600FT roll length is suited to shop or onsite production where long runs are common, reducing time spent stopping to change rolls and supporting smoother throughput on edgebanding equipment.
• The Rehau, Inc. branding ties this edgebanding to a dedicated edgebanding manufacturer, giving shops a consistent reference part number when reordering by 716041-310 for future projects.

Edgebanding Dimensions That Affect Installation

The 15/16 inch by .018 inch sizing in the SAP description directly affects how this Rehau ABS Edgebanding handles during installation. The 15/16 inch width provides enough overhang beyond common panel thicknesses to allow flush trimming on edgebanders or with hand tools without exposing core material. The .018 inch thickness keeps the edge profile modest, which can reduce the amount of material removed during trimming and help maintain a crisp edge on doors, drawer fronts, and panels. Because the dimensions are fixed by the part number and description, shops can dial in edgebander settings once for this size and repeat the setup whenever they run the 716041-310 roll on similar substrates.

How This Rehau Edgebanding Fits Into Shop Work

Where This ABS Edgebanding Is Typically Applied

The Rehau ABS Edgebanding, identified by manufacturer part 716041-310 and category Edge Banding, is intended for edging tasks in woodworking environments. The edge banding classification and ABS description position it for finishing exposed edges of boards, panels, and components where an ABS edge is required to cover and protect the core material. The CP41542 reference in the SAP description signals a defined style or decor within Rehau offerings, so shops that standardize on that look can use this roll when they need consistent ABS edge treatment across doors, drawer fronts, and casework parts. Because the product is listed under Miscellaneous|Edgebanding, it fits into general edgebanding workflows rather than a highly specialized niche, supporting everyday cabinet and furniture production where ABS edge treatment is planned.

Why The 716041-310 Details Matter For Results

The specific SAP description "15/16X.018 CP41542 EMB LAC 600FT" tied to the 716041-310 part number gives installers and shop leads several concrete controls over their process. The 15/16 inch width defines the amount of edge coverage, which helps determine how aggressively edges can be trimmed while still hiding the board core on finished parts. The .018 inch thickness influences edge feel and trimming behavior, so operators can adjust feed speeds and cutter depth to avoid overcutting a thin edge. The CP41542 and EMB LAC elements distinguish this roll from other Rehau variants, helping inventory managers keep the right design and finish grouped under a single identifier for repeat jobs. The 600FT length directly supports batching work, since shops can estimate how many linear edges a single roll will handle when planning cabinet runs or furniture lines, which leads to more predictable material usage. Together, these details support repeatable edgebanding results because every roll that carries 716041-310 behaves the same within the defined width, thickness, and design family.

Common Questions About Rehau ABS Edgebanding 716041-310

Select Rehau 716041-310 For Defined Edge Runs

The Rehau ABS Edgebanding 716041-310 gives you a clearly defined 15/16 inch by .018 inch ABS edge solution in a 600FT roll, with CP41542 EMB LAC specifying its design family. These fixed details let shops plan edge coverage, trimming, and run length around a single consistent Rehau part number when laying out cabinet, furniture, or panel jobs.