Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau ABS edgebanding 716041-313 is an ABS edge banding from Rehau, Inc. that finishes exposed board edges on casework and panels so cut substrates present a clean, uniform edge on the job. The product is identified as edge banding in the Edgebanding category, so it serves as the finishing strip where raw board edges would otherwise show, helping projects match specified materials visually. The manufacturer part number 716041-313 ties directly to this specific color and texture combination, which matters when repeating a design standard or matching prior installations. The SAP description 15/16X.018 CP21156 EMB LAC 600FT confirms this is a narrow, thin band suitable for edging typical panel thicknesses, giving fabricators a controlled, predictable edge width to work with during trimming.
The 15/16 inch width noted in the 15/16X.018 CP21156 EMB LAC 600FT designation gives a margin over typical board thickness, which simplifies alignment during application and allows final trimming back to a tight edge. The .018 inch thickness in the same description defines a thin profile, which helps standard edge-banding equipment process the material without needing unusual setups. Being identified as ABS Edgebanding ties it to common plastic edgeband workflows, so fabricators can run familiar feed speeds and trimming passes when working this part.
The product class Edge Banding, combined with the Rehau ABS Edgebanding, 716041-313 name, places this material directly in cabinet and woodworking edge finishing. The 15/16 inch width works well on standard 3/4 inch panels, offering slight overhang that is later trimmed for a crisp line along cabinet doors, shelves, or case sides. The SAP description 15/16X.018 CP21156 EMB LAC 600FT confirms a continuous 600 foot run, which supports shop environments producing multiple units, such as banks of casework or runs of commercial millwork. The Rehau brand association helps maintain consistency when a project specification calls out Rehau ABS, allowing different shops or phases of work to reference the same manufacturer part number. Because the material is categorized under Miscellaneous|Edgebanding, it fits naturally into mixed-material builds where veneered panels, laminates, and other surfacing materials need a compatible edge treatment.
The explicit 15/16X.018 size designation gives installers a repeatable dimension set for equipment setup, so pressure rollers, trimmers, and scrapers can be dialed in around a known width and thickness. The .018 inch thickness supports a modest glue line at the substrate interface, helping the edge band sit flush once pressed and trimmed. The CP21156 EMB LAC code in the SAP description identifies a specific decorative style, so when the same identifier is used on drawings or cut lists, shops can pull matching Rehau ABS edgebanding without ambiguity. The 600FT length listed allows longer, uninterrupted feeding on edgebanding machines, which can reduce handling at corners and transitions when processing larger panels or extended shelving runs.
Rehau ABS Edgebanding, 716041-313 is an ABS edge banding from Rehau, Inc., so it is used to finish exposed edges on panels and casework for a cleaner appearance.
The SAP description 15/16X.018 CP21156 EMB LAC 600FT shows the band is 15/16 inch wide and .018 inch thick, giving a narrow, thin edge suitable for standard panel edging operations.
The SAP description lists 600FT, so this Rehau ABS Edgebanding, 716041-313 provides 600 feet of continuous material for extended edging runs in the shop or on site.
The CP21156 EMB LAC portion of the SAP description identifies a specific decorative and surface combination, supporting consistent color and texture selection between projects.
The .018 inch thickness in the 15/16X.018 designation yields a thin ABS profile, which trims and flushes cleanly with common edgebanding tools and woodworking workflows.
The 600FT length in the SAP description supports long, uninterrupted runs on edge-banding equipment, helping shops process multiple panels without frequent material changeover.
Rehau ABS edgebanding 716041-313, defined by the 15/16X.018 CP21156 EMB LAC 600FT description, offers a specific width, thickness, and decorative code that support repeatable edge finishing. Using this defined manufacturer part number keeps projects aligned with specified Rehau ABS edge banding across runs and reorders.
Sold In: 1 Roll