Rehau ABS edgebanding 716041-317 15/16 x .018

Rehau ABS Edgebanding 716041-317 For Clean Edges

Rehau ABS edgebanding 716041-317 is an ABS edge banding from Rehau, Inc. that finishes raw panel edges so exposed core is covered, which helps projects present as complete cabinet or furniture components on the job. The 15/16 inch width stated in the 15/16X.018 CP60636 EMB LAC 600FT description gives coverage for standard panel thicknesses with a bit of overhang, so edges can be trimmed flush for a neat line. The .018 inch thickness called out in the same description provides a slim band, which keeps edge build-up modest where tight reveals or aligned doors are important. The 600FT length noted in the description offers continuous material for longer runs, so installers can work through multiple cabinets or a full room layout without frequent material changes.

Key Rehau ABS Edgebanding Details For Jobs

• The product is identified as Rehau ABS Edgebanding, which defines it as ABS edge banding used to cover and finish exposed substrate on panels so cabinet or furniture edges have a uniform appearance around the field surface.
• The 15/16 inch width listed in the 15/16X.018 CP60636 EMB LAC 600FT description covers typical 3/4 inch class panels with extra width, allowing trimming operations to produce straight, chip-free finished edges across cabinet runs.
• The .018 inch thickness specified in the description sets a relatively thin profile, which keeps transitions between face material and band subtle where doors, drawer fronts, or shelves sit close together in built-ins or casework.
• The 600FT length referenced in the description provides a long continuous run of edging, which supports efficient processing of multiple parts on edgebanders or during hand application without frequent material changeovers.
• The Manufacturer Part # 716041-317 gives a precise identifier for this exact edgebanding, which helps shops and installers match existing runs or repeat prior jobs that were built around the same Rehau reference.

Edgebanding Size Details For Installation Work

The 15/16 inch width stated in the 15/16X.018 CP60636 EMB LAC 600FT description gives installers enough edge coverage on standard panel stock so slight panel variation still trims cleanly. The .018 inch thickness named in the same description defines how this ABS edge banding will behave at corners and tight reveals, supporting applications where a low-profile edge is preferred. The 600FT length in the description supports longer installation sequences from a single roll, which fits production environments or larger jobs that benefit from consistent material along all exposed edges.

Using This Rehau ABS Edgebanding In Projects

Where Rehau ABS Edgebanding 716041-317 Fits Best

This Rehau ABS Edgebanding, listed under Category Miscellaneous|Edgebanding and Product Class Edge Banding, is positioned as edge banding for panel-based construction, so it serves cabinets, furniture, and other casework built from sheet goods. The 15/16 inch width stated in the 15/16X.018 CP60636 EMB LAC 600FT description aligns with edging work on panels nominally around 3/4 inch thick, so it works on sides, shelves, and doors sized from typical sheet stock. Because the .018 inch thickness is part of the description, it suits projects where a thinner ABS profile is preferred along visible fronts, helping doors and drawer fronts sit close while still presenting a finished band. The 600FT length in that same description supports shop runs or on-site trimming where multiple cabinets share the same finish, so all exposed edges use the same Rehau ABS Edgebanding 716041-317 reference across the project.

Why These Dimensions Support Repeatable Results

The combination of 15/16 inch width and .018 inch thickness in the 15/16X.018 CP60636 EMB LAC 600FT description gives a specific dimensional profile, allowing shops to set up equipment for this Rehau ABS edgebanding and expect the same trim behavior every time. The 15/16 inch width provides predictable overhang beyond standard panel faces, so trimming tools can be dialed in for a consistent flush cut across large batches of parts. The .018 inch thickness lets this ABS edge banding sit close to adjoining surfaces, helping maintain gaps and reveals planned in the layout without needing to adjust clearances for a heavier band. The 600FT length described supports repeatable work over an extended run, so once equipment is tuned to this material, the same Manufacturer Part # 716041-317 can carry a full set of casework without changing edging parameters midstream.

Common Questions About Rehau ABS Edgebanding 716041-317

Select Rehau ABS Edgebanding 716041-317 For Consistent Edges

Rehau ABS Edgebanding 716041-317 combines a 15/16 inch width and .018 inch thickness, as stated in the 15/16X.018 CP60636 EMB LAC 600FT description, so edges on standard panel work can be trimmed clean and kept low profile. The 600FT length in the same description supports longer cabinet or furniture runs from a single reference, tying a project together visually. Selecting Manufacturer Part # 716041-317 through Wurth Baer Supply aligns material, dimensions, and brand for shops that want consistent ABS edge banding performance across repeat jobs.