Rehau ABS edgebanding 716041-324 is an ABS edge banding product from Rehau, Inc. listed under edge banding, so it is intended to finish and protect exposed panel edges on woodworking projects where a matching banded edge is required. The 15/16 inch width gives coverage for typical panel thickness with a slight overhang, which allows trimming the edge flush for a crisp, straight finish on cabinets or casework. The .018 inch thickness keeps the banding relatively thin, so it lays down tight to the substrate and helps maintain a clean transition between the face material and the edge. The ABS material provides a uniform, consistent surface along the full length, which supports even color appearance when the banding matches a CP21094 reference. The 600 ft length described in the product data provides extended run capacity, reducing changeovers during repetitive edge-banding work.
The 15/16 inch width specified for this Rehau ABS edgebanding gives working room beyond the face of typical panels, which allows installers to apply the banding, then trim both edges back to the panel for a straight, uniform reveal. The .018 inch thickness indicated in the description keeps the edge slim, which helps reduce the lip at the transition where the banding meets the panel surface once it is trimmed. The ABS material stated in the product name provides a consistent feel along the edge, which is useful when aligning banded edges with doors, drawer fronts, or adjoining panels for a continuous appearance.
This product is classified as edge banding and identified specifically as Rehau ABS edgebanding, 716041-324, which positions it for use anywhere an exposed panel edge needs a finished ABS edge. The 15/16 inch width works well along cabinet sides, shelves, and vertical partitions where standard panel thickness calls for slight overhang before trimming, so fabricators can process parts through an edgebander and then trim flush. The .018 inch thickness described in the SAP data means the edge remains relatively thin, which supports a tight, neat look on doors or drawer fronts when they sit close together. The CP21094 reference in the description signals a defined color or design match point, so shops can select this banding when coordinating with corresponding decorative surfaces that reference the same CP21094 designation. Because the length is listed as 600 ft, the roll supports repetitive runs on larger projects such as full kitchens, banks of office casework, or longer shelving sections where continuous color and thickness control overall visual alignment.
The combination of 15/16 inch width and .018 inch thickness in this Rehau ABS edgebanding helps create predictable trimming results, because the width provides enough excess for clean routing while the thickness stays manageable for common edge processing equipment. The ABS material noted in the product name offers a consistent edge profile along the full 600 ft length, which is important when many parts are run in sequence and need edges that line up visually when installed together. The CP21094 EMB LAC identification in the SAP description defines a specific design line, which helps maintain color consistency across replacement parts or additional phases of a project that use the same reference. The manufacturer part number 716041-324 ties the roll directly to that specification, which reduces confusion when reordering for matching installations or expanding an existing layout using the same edgebanding.
Rehau ABS edgebanding 716041-324 uses ABS material, which provides a uniform, consistent edge surface that supports a clean finished appearance on cabinet and furniture panels.
Rehau ABS edgebanding 716041-324 at 15/16 inch width and .018 inch thickness gives slight overhang for trimming while keeping a slim edge profile after processing.
Rehau ABS edgebanding 716041-324 is listed with a 600 ft length, supporting extended runs on larger cabinet or casework projects without frequent roll changes.
Rehau ABS edgebanding 716041-324 is categorized as edge banding, so it is used on exposed panel edges in woodworking projects such as cabinets and casework.
Rehau ABS edgebanding 716041-324 lists CP21094 EMB LAC in the description, signaling a specific design reference that aligns color and finish with matching surfaces.
Rehau ABS edgebanding 716041-324 uses manufacturer part number 716041-324 to tie directly to this size and design, which supports accurate reorders for matching work.
Rehau ABS edgebanding 716041-324 combines ABS material, a 15/16 inch width, and .018 inch thickness with a defined CP21094 reference and a listed 600 ft length, giving shops a repeatable option for finishing panel edges on coordinated cabinet and casework projects.
Sold In: 1 Roll