Rehau ABS edgebanding 716041-325 is an ABS edge banding product that covers and protects raw board edges, so cabinet and fixture projects present a finished look instead of exposed core. The SAP description states 15/16X.018 CP40837 EMB LAC 600FT, which means the banding is 15/16 inch wide and .018 inch thick, giving enough coverage for common panel thicknesses while keeping a slim profile along the edge. The description also identifies CP40837 EMB LAC, indicating a specific embossed lacquer surface that provides a defined texture and sheen, which helps panels visually match this Rehau, Inc. banding in both color system and finish pattern. The 600FT detail shows this is supplied as a long run of material, supporting continuous edging on multiple components in a single job without frequent spool changes.
The SAP description 15/16X.018 CP40837 EMB LAC 600FT gives practical sizing information for planning installation. The 15/16 inch width gives enough overhang on standard panels for trimming operations, which supports clean edges after routing or scraping. The .018 inch thickness keeps the edge line modest, so adjustments at corners and ends stay manageable when aligning banding with adjacent components. The 600FT length supports setting up edgebanding equipment once and running many panels in sequence, which helps maintain uniform tension and feed settings throughout a job.
This product is identified as Rehau ABS edgebanding, category Miscellaneous|Edgebanding and product class Edge Banding, which positions it for use on cabinet, casework, and general woodworking panels where raw edges from cutting need to be covered. The manufacturer part number 716041-325 and the CP40837 EMB LAC code tie the banding to a specific Rehau surface design, so it can be selected when a project calls for that exact embossed lacquer appearance. Because the width is listed as 15/16 inch, it aligns with common carcass and front panel thicknesses in the woodworking industry, supporting applications on vertical sides, shelves, and doors that share the same face material.
The 15/16X.018 dimension in the SAP description sets clear expectations for how this Rehau ABS edge banding will behave during trimming and finishing. The 15/16 inch width provides a consistent margin beyond the panel edge, giving room for standard trimming tools to track without cutting into the face, which helps keep edges straight from part to part. The .018 inch thickness means the banding presents a slim edge, so alignment at corners and around openings can be dialed in with modest material removal when flushing surfaces. The CP40837 EMB LAC notation indicates an embossed lacquer finish, giving installers a defined surface character to coordinate with matching panels, which supports consistent appearance across cabinet runs. Finally, the 600FT length gives shops enough material per roll to run repeated setups and parts under the same machine conditions, which helps reduce visual shifts from one cabinet or batch to the next.
Rehau ABS edgebanding 716041-325 is described as 15/16X.018, so it is 15/16 inch wide and .018 inch thick, which supports standard cabinet panel edging and typical trimming workflows.
The CP40837 EMB LAC designation indicates an embossed lacquer finish, giving the banding a defined texture and sheen that helps it visually match panels using the same CP40837 design.
This product is identified as ABS edgebanding in the Edge Banding class, so it is intended to cover and protect raw panel edges in woodworking, helping projects present a finished appearance.
The 600FT detail in the SAP description means the roll provides a long continuous run, supporting extended edgebanding setups and consistent machine settings across multiple panels.
The Miscellaneous|Edgebanding category and Edge Banding class indicate use on cabinet, casework, and similar woodworking panels where cut edges need a finished ABS edge treatment.
The manufacturer part number 716041-325 uniquely identifies this specific Rehau ABS edgebanding, which helps align color and finish selection with matching Rehau surface materials.
Rehau ABS edgebanding 716041-325 combines a 15/16 inch width, .018 inch thickness, and CP40837 embossed lacquer finish to support edge treatment on matching panel work. The 600FT length suits production-style edging where multiple cabinets or fixtures share the same design. With its clear sizing and finish designation, this Rehau, Inc. edge banding can be specified when a project calls for the CP40837 EMB LAC appearance across doors, drawer fronts, and case parts.
Sold In: 1 Roll