Rehau ABS edgebanding 716041-331 is an ABS edge banding from Rehau, Inc. that finishes exposed panel edges so cabinet and fixture parts present a consistent, finished appearance across the job. The 15/16 inch width covers typical panel thicknesses while giving a bit of tolerance at the edge, which supports straight trimming passes and neat corners on standard cabinetry components. The .018 inch thickness provides a slim, workable edge that blends closely with board faces, aiding in a flush profile after trimming operations. This edgebanding is supplied in a 600 ft length, which supports longer production runs or multiple jobs before reordering, helping shops plan material usage around repeated cabinet or fixture builds.
The 15/16 inch width in the SAP description positions this Rehau ABS edgebanding to span the face of typical board thicknesses used in cabinetry or similar constructions, giving sufficient overhang for trimming equipment to cut a clean, straight edge. The .018 inch thickness supports a relatively light edge profile that integrates well with most panel faces, helping create an edge that is not bulky once bonded and trimmed. With a 600 ft length defined in the product description, one roll can support sizable edging runs on cabinet doors, shelves, and carcass parts, which can reduce material changeovers during continuous work.
This Rehau ABS edgebanding, identified by manufacturer part number 716041-331 and classified as Edge Banding, is applied to exposed edges of panels within cabinet, furniture, and interior fixture builds, so raw board edges are concealed. The 15/16 inch width from the SAP description targets panel edges in the general cabinet and casework range, allowing fabricators to cover the thickness of the substrate with a modest margin for trim waste. Because it is described as ABS edgebanding, it fits into workflows that already use ABS-based edges on melamine, laminate-faced, or painted components, supporting visual consistency along verticals, shelves, and door fronts.
The 15/16 x .018 CP20514 EMB LAC 600FT description gives a dimensional and finish reference that installers and shop leads can match when repeating or extending an existing job, helping avoid mismatch in edge appearance. The .018 inch thickness keeps the edge modest, which supports creating a nearly flush transition from face to edge once trimmed, limiting noticeable steps between the board surface and the band. A 600 ft length enables edging many parts before switching rolls, which suits both custom shops running series of cabinets and production settings handling repeated panel sizes. The manufacturer identifier CP20514 EMB LAC in the description gives a coded reference to the specific embossed lacquer style in this ABS edgebanding, which matters when aligning new work to previously supplied components using the same specification.
Rehau ABS edgebanding 716041-331 is an ABS Edge Banding from Rehau, Inc., used to cover and finish exposed panel edges in cabinet, furniture, and fixture components.
The Rehau ABS edgebanding 716041-331 is described as 15/16 inch by .018 inch, giving coverage for typical panel thicknesses while keeping a slim, easily trimmed edge profile.
The SAP description lists 600 ft, allowing extended edgebanding runs so shops can process many cabinet or fixture parts from a single roll.
This ABS edge banding is manufactured by Rehau, Inc., so it aligns with other Rehau edgebanding products used in woodworking environments.
The .018 inch thickness of Rehau ABS edgebanding 716041-331 yields a relatively slim edge that blends closely with panel faces after trimming.
The CP20514 EMB LAC reference in the description identifies the specific embossed lacquer style, aiding jobs that repeat the same ABS edgebanding look.
Rehau ABS edgebanding 716041-331, defined as 15/16 x .018 CP20514 EMB LAC 600FT, gives shops a clearly specified ABS edge banding for cabinetry and similar builds. The combination of 15/16 inch width, .018 inch thickness, and 600 ft length supports consistent edge appearance across multiple parts, while the Rehau, Inc. branding and precise part number 716041-331 help align new work with prior projects that used the same edge profile.
Sold In: 1 Roll