Rehau ABS edgebanding 716041-338 15/16 x .018

Rehau ABS Edgebanding For Clean Panel Edges

Rehau ABS edgebanding gives cabinet and woodworking shops an ABS-based edge treatment under manufacturer part number 716041-338, so panel edges can be finished with a consistent material that matches project specifications across multiple runs.

This Rehau, Inc. product is classified as edge banding in the edgebanding category, which means it is intended for covering and protecting raw edges on sheet goods or similar substrates where a banded edge is required.

The SAP description 15/16X.018 CP40500 EMB LAC 600FT defines a 15/16 inch wide band at approximately .018 inch thickness on a 600 foot roll, giving installers a long, continuous length for repetitive cabinet or furniture components in the same project.

The ABS construction identified in the name aligns this material with common edgebanding machinery and shop processes that are already set up to run ABS banding, helping maintain predictable trimming and routing behavior during fabrication.

Key Rehau ABS Edgebanding Details For Projects

• The 15/16 inch width identified in the 15/16X.018 CP40500 EMB LAC 600FT description covers standard panel thicknesses near that dimension, giving installers enough overhang to trim back to a clean, flush edge on cabinets or casework.
• The .018 inch thickness stated in the same SAP description sets a slim yet defined edge profile, which helps trimming tools cut cleanly while keeping the edge visually light on doors, drawer fronts, or shelving.
• The 600 foot length in the product description provides an extended continuous run, supporting production of multiple components in the same color and profile without frequent material changes during edgebanding operations.
• The CP40500 EMB LAC detail in the SAP description identifies a specific finish and style variant within Rehau offerings, helping shops align this banding with matching decorative surfaces for consistent appearance.
• The manufacturer part number 716041-338 ties directly to Rehau documentation, so repeat orders can match the same edge material when shops standardize on this banding for a program or product line.

Edgebanding Size Details For Installation Planning

The 15/16 inch width specified in the SAP description supports setups where banding is applied slightly proud of the panel and then trimmed, giving edge-banding machines enough material to track knives or routers accurately along cabinets and panels.

The .018 inch thickness provides a predictable layer for trimmers to remove minimal material, which helps maintain consistent edges on cabinet doors or furniture components when using standard ABS-capable machinery.

The 600 foot roll length in the description supports extended production runs, reducing downtime between jobs and allowing installers or shops to edge many parts from a single roll when working on larger woodworking projects.

Where This Rehau Edgebanding Works In The Shop

Using ABS Edgebanding In Woodworking Applications

This product is listed under the edgebanding category and edge banding product class, positioning it for use on cabinet parts, shelving, and similar woodworking components where raw panel edges need covering.

The ABS identification in the product name signals compatibility with typical ABS edgebanding processes, so shops set up for ABS can run this material through edge-banding machines, trimmers, and routers using established parameters.

The 15/16 inch by .018 inch sizing from the SAP description matches common applications on panels close to that thickness, allowing fabricators to apply the band slightly proud and trim back to a tight, square profile on cabinetry or fixtures.

The 600 foot length referenced in the description supports repetitive production, so casework, doors, and drawer fronts within the same project or program can be finished from one continuous roll for consistent visual results.

Because the manufacturer part number 716041-338 uniquely defines this Rehau banding, shops managing multiple finishes or profiles can track this exact edge material in their job and inventory systems for repeatable project sourcing.

Details That Support Consistent Edge Results

The 15/16 inch width in the 15/16X.018 CP40500 EMB LAC 600FT description gives room for minor panel size variation, helping edge-banders maintain full coverage even when panels are slightly undersized, then trim back to a uniform reveal.

The .018 inch thickness supports smooth transitions between the face material and the edge, which helps minimize noticeable steps after trimming and finishing on cabinet fronts or casework ends.

The ABS material referenced in the product name provides a stable thermoplastic edge, which supports routine trimming and scraping operations used in ABS-focused shops, contributing to predictable finishing time per part.

The CP40500 EMB LAC designation in the SAP description represents a particular decorative and surface configuration, guiding shops to pair this edge banding with matching boards or laminates when aiming for coordinated surfaces.

The 600 foot roll length helps maintain color and appearance consistency across many parts, since panels within a job can be edged from the same run of Rehau ABS edgebanding, supporting uniform results from part to part.

Common Questions About Rehau ABS Edgebanding 716041-338

Select Rehau ABS Edgebanding 716041-338 For Matching Edges

Rehau ABS edgebanding 716041-338 combines a 15/16 inch width, .018 inch thickness, and 600 foot length, giving woodworking and cabinet shops a defined ABS edge solution sized for panel work and repeatable projects.

The CP40500 EMB LAC designation and Rehau branding identify a specific finish and configuration, so when panel work calls for this exact edge detail, this banding aligns material, appearance, and sizing in one stocked item.