Rehau ABS Edgebanding 716041-345 is ABS edge banding from Rehau, Inc. that finishes exposed panel edges, so cabinet and furniture projects get a defined, uniform edge profile. The 15/16 inch width covers typical panel thickness with a small overhang, which allows trimming flush without exposing core material. The .018 inch thickness provides a thin, work-friendly edge that follows panel lines closely, helping installers keep corners crisp on straight runs. The CP21117 designation identifies the specific design in the Rehau system, which keeps color and texture matching consistent across multiple jobs and repeat orders. The embossed lacquer surface adds a textured lacquered finish that reads as finished casework, so the edge visually ties into the panel face. The 600 ft length supports longer production runs or multiple smaller jobs from one roll, reducing changeovers during fabrication.
The 15/16 inch width of this Rehau ABS Edgebanding, 716041-345, gives installers a modest margin past standard panel thickness, which simplifies alignment at the edgebander or during manual application. The .018 inch thickness offers a low-build edge that responds well to trimming operations, supporting clean passes with standard edge trimmers. The embossed lacquer finish on the CP21117 design means the surface is already finished in a textured lacquer look, so the edge is visually ready once applied and trimmed. The 600 ft length per roll aligns with batch production, allowing shops to process a series of panels to the same standard before changing material.
This Rehau ABS Edgebanding, 716041-345, belongs to the Edge Banding product class, so it is suited for closing exposed edges on panel-based construction. The 15/16 inch width is sized for edges on casework, cabinet components, and similar assemblies built from sheet goods, giving coverage that supports both faces with trim margin. With an .018 inch thickness, the banding lays close to the substrate, which is useful where a low-profile edge is preferred over a heavy build. The CP21117 embossed lacquer design links the banding to a specific finish style, so shops working under a defined material schedule can keep this edge appearance consistent across doors, drawer fronts, and carcass components on related jobs.
The matched set of 15/16 inch width and .018 inch thickness on the Rehau ABS Edgebanding 716041-345 supports predictable trimming, which helps reduce rework when running multiple panels through the same setup. Because the banding is ABS, it is part of a known plastics family used widely for edgebanding, so its behavior under routing and trimming is familiar to many woodworking shops. The CP21117 identifier gives a repeatable reference when specifying or reordering this design, so future runs can use the same code rather than relying on visual guesswork. The embossed lacquer finish also adds a consistent surface character that does not require separate finishing steps, which streamlines the path from edgebanding to assembly. With 600 ft on each roll, shops can plan jobs knowing that a single roll supports extended runs under the same appearance standard.
Rehau ABS Edgebanding 716041-345 is 15/16 inch wide and .018 inch thick, which supports edge coverage on common panel thicknesses while keeping a thin profile for trimming work.
The CP21117 designation identifies the specific Rehau design for this edgebanding, which helps maintain consistent color and texture selection across multiple projects and reorders.
The embossed lacquer finish gives the edgebanding a textured lacquered surface, so the finished edge visually aligns with lacquer-style casework surfaces after trimming.
The 600 ft roll length supports production-oriented work by allowing long or repeated runs of panels to be edged under the same material setup before changing rolls.
This product is ABS edgebanding from Rehau, so it uses ABS plastic, a common edgebanding material that works well with standard trimming and routing operations.
The 15/16 inch width provides slight overhang on typical panels, giving room to trim both faces flush so the core edge remains concealed after processing.
The Rehau ABS Edgebanding 716041-345 combines 15/16 inch width, .018 inch thickness, and an embossed lacquer CP21117 design to support consistent edge appearance on panel projects. The 600 ft roll length aligns with shop workflows that favor longer, uninterrupted runs. For cabinet, furniture, or casework jobs where matching a specific ABS edge design matters from one batch to the next, this Rehau edgebanding provides a defined size, material, and finish combination ready for production use.
Sold In: 1 Roll