Rehau ABS edgebanding identified as 716041-349 is an ABS edge banding that covers and protects raw panel edges, which helps give cabinet and furniture projects a finished, professional look using this specific color and finish match in a single step. The 15/16 inch width stated in the SAP description means the banding spans standard 3/4 inch panel edges with overhang, which allows trimming back to a flush, tight edge along the entire run. The .018 inch thickness noted in the SAP description provides a thin edge profile, which suits applications where a slim, unobtrusive edge line is desired on casework and shelving. The CP20780 EMB LAC reference in the SAP description denotes a defined color, embossed surface, and lacquer finish, which supports visual coordination when matching to corresponding surfaces in the same specification. The 600FT length noted in the SAP description describes a long production run per roll, which supports extended edging of multiple components without stopping for frequent roll changes during fabrication.
The 15/16 inch width listed in the SAP description provides extra coverage past typical 3/4 inch substrates, which gives installers trimming allowance to achieve clean, flush edges without exposing the core at minor alignment variations. The .018 inch thickness specified in the SAP description sets a relatively thin edge, which reduces the step between face material and banding so final sanding and finishing steps remain minimal. The combination of this width and thickness in a single SAP description line gives clear dimensional guidance, which supports accurate setup of edgebanding equipment and predictable results across repeated production jobs. The ABS material reference in the product name indicates a consistent thermoplastic edge, which allows shops already configured for ABS banding to integrate this item into existing machine parameters and workflows.
The Category listing of Miscellaneous|Edgebanding and the Product Class of Edge Banding establish this Rehau ABS edgebanding, 716041-349, as a solution for covering exposed edges on panels, which positions it for cabinet boxes, shelves, and similar components needing a finished edge. The 15/16 inch width from the SAP description suits edging work on standard 3/4 inch engineered wood panels, which are widely used for cabinet sides, bottoms, and vertical partitions. The .018 inch thickness specified in the SAP description creates a slim edge profile, which is useful wherever a light, unobtrusive edge presence is preferred, such as on interior cabinet parts or shelving. The CP20780 EMB LAC notation in the SAP description points to a defined visual specification, which supports use on jobs where color and surface pattern continuity between faces and edges is part of the design requirement. The 600FT run length described in the SAP description supports application across many parts on a single job, which aligns with production of multiple cabinets or casework sections cut from the same material program.
The Manufacturer Part # 716041-349 provides a precise identifier for this Rehau ABS edgebanding, which helps buyers and production staff call out the exact banding whenever they repeat a job or standard cabinet line using this specification. The product name reference to Rehau ABS edgebanding connects the material and brand in a single label, which supports consistent sourcing where Rehau ABS is already part of the shop material library. The SAP description "15/16X.018 CP20780 EMB LAC 600FT" gathers size, finish code, and length into one string, which simplifies documentation on work orders and helps avoid mix-ups with other widths, thicknesses, or finishes. The 600FT length indicated in the SAP description offers substantial footage per roll, which supports more continuous runs on edgebanding equipment and reduces downtime between changeovers on recurring cabinet or shelving components. The ABS classification in the product name designates the banding as an ABS thermoplastic edge, which enables operators to rely on established ABS-specific settings and handling practices for consistent results across multiple projects that use this same part number.
Rehau ABS edgebanding 716041-349 is an ABS edge banding classified under Edge Banding, which means it is used to cover and finish exposed panel edges on cabinets, furniture, and similar casework components.
The 15/16X.018 reference in the SAP description indicates a 15/16 inch wide banding with .018 inch thickness, which guides equipment setup and fit when edging standard panel materials.
The 600FT length noted in the SAP description provides extended linear footage on one roll, which supports longer uninterrupted edgebanding runs and can reduce time spent changing rolls during repetitive jobs.
The CP20780 EMB LAC notation in the SAP description identifies a specific color, embossed texture, and lacquered finish, which supports visual matching on projects using the same code across faces and edges.
This Rehau ABS edgebanding is identified by Manufacturer Part # 716041-349, which provides a consistent reference for purchasing and for documenting material specifications on repeat cabinet or furniture projects.
This product is listed under the Category Miscellaneous|Edgebanding and Product Class Edge Banding, which confirms its role as a dedicated edge-finishing material for woodworking and casework applications.
Rehau ABS edgebanding 716041-349 from Wurth Baer Supply combines a specified 15/16X.018 dimension, CP20780 EMB LAC finish notation, and 600FT length in one clearly defined part, which supports consistent edging across cabinet and furniture projects that call for this exact ABS banding.
Sold In: 1 Roll