Rehau ABS edgebanding 716041-354 15/16 x .018

Rehau ABS Edgebanding 716041-354 For Clean Edges

Rehau ABS edgebanding 716041-354 provides an ABS edge banding solution for finishing raw panel edges on woodworking and cabinet projects, so exposed core material is covered and workpieces present a uniform, job-ready edge. This Rehau, Inc. edge banding is part of the Rehau ABS Edgebanding line, giving shops a consistent material choice across multiple projects. The 15/16 inch width works with standard 3/4 inch panels, giving extra overhang for trimming so edges can be flushed accurately after bonding. The .018 inch thickness keeps the edge profile slim, which helps panels stack and align without a bulky build-up at the edge. The CP40729 reference ties this edgebanding to a specific decor match, helping maintain visual continuity across panels using that decor. The EMB LAC notation designates an embossed lacquer surface, so installers get a textured, lacquered look on the banded edge to match corresponding embossed lacquer boards in a run.

Key Rehau ABS Edge Banding Job Advantages

• The 15/16 inch width covers standard 3/4 inch board edges with trim allowance, supporting clean routing or trimming for a straight, professional edge line along cabinet parts and casework.
• The .018 inch thickness creates a slim profile at the edge, helping doors and panels align closely while avoiding a pronounced lip where edgebanding meets the surface during assembly.
• The ABS material format defines this as an ABS edge banding, supporting shops that standardize on ABS instead of PVC when selecting edgebanding materials for cabinets and fixtures.
• The EMB LAC designation identifies an embossed lacquer surface, which provides a textured, lacquered appearance so the edge presentation aligns visually with embossed lacquer panel finishes.
• The CP40729 decor code ties this edgebanding to that specific decor, helping maintain consistent color and pattern transitions from panel face to edge across a project.
• The 600 ft length groups substantial footage on a single roll, supporting longer production runs or multiple cabinets without frequent material changeover at the edgebander.

Edgebanding Size And Finish For Straightforward Runs

This edge banding uses a 15/16 inch width, giving a modest overhang on typical 3/4 inch panels so trimming operations can remove slight misalignment and leave a crisp, flush edge. With a .018 inch thickness, the band forms a fine edge line that blends closely with the panel surface, which helps maintain tight reveals on doors and drawer fronts in a cabinet layout. The EMB LAC embossed lacquer finish places a textured, lacquer-style surface on the edge, so the banded edge visually relates to matching embossed lacquer panels in the same decor family. The CP40729 decor reference on this Rehau ABS edging connects it to that decor pattern, which supports consistent appearance when fabricating all visible edges for that design series. This combination of width, thickness, and surface treatment supports repeatable processing on standard edgebanding equipment.

Using This Rehau ABS Edge Banding In Production

Where Rehau ABS Edgebanding 716041-354 Fits Best

This Rehau ABS Edgebanding product sits in the Edge Banding class, placing it directly in cabinet, fixture, and general woodworking edge finishing workflows. The 15/16 inch by .018 inch format is suited to edging components cut from 3/4 inch sheet goods, such as cabinet sides, shelves, doors, and drawer fronts, where a small overhang is preferred before trimming. The EMB LAC embossed lacquer finish aligns with embossed lacquer panel programs, so the banded edges can visually coordinate when using panels carrying the same CP40729 decor reference. Because it is an ABS edge banding, shops using ABS-based programs can integrate this roll into existing ABS-only material standards for interior fittings and casework projects that specify that substrate.

Why These Edgebanding Details Support Consistent Results

The defined 15/16 inch width gives operators predictable overhang on standard thickness boards, helping edge-banding machines and hand trimmers remove excess material cleanly and maintain straight edges along long cabinet parts. The .018 inch thickness keeps the transition between face and edge subtle, which can reduce touch-up on joints and help doors sit evenly when aligned in a bank. The CP40729 decor link on this Rehau ABS edging connects the tape to that decor system, so matching edge material can be selected whenever that design is used, reducing visual mismatch risks across replacement parts or multi-phase projects. The EMB LAC designation signals an embossed lacquer surface, giving fabricators a clear indicator when selecting edge material to coordinate with lacquer-textured boards within the same design family. The 600 ft roll length supports extended production runs on a single change, which helps maintain color continuity and reduces interruptions once an edgebander is dialed in for that material.

Common Questions About Rehau ABS Edgebanding 716041-354

Choose This Rehau ABS Edgebanding For Matching Edges

Rehau ABS edgebanding 716041-354 combines a 15/16 inch width, .018 inch thickness, and EMB LAC embossed lacquer finish tied to CP40729 decor, so panel edges can match corresponding embossed lacquer designs. For shops working with ABS edge banding programs, selecting this 600 ft Rehau, Inc. roll supports consistent appearance and straightforward processing when edging 3/4 inch components in a coordinated cabinet or fixture run.