Rehau ABS edgebanding gives you a dedicated edge treatment for boards in projects where ABS is specified, so you can finish exposed edges in a consistent way along the entire run. The 15/16 inch width covers typical panel thicknesses with a small overhang for trimming, which helps installers flush the edge cleanly after bonding. The .018 inch thickness provides a low-profile edge layer, which matters when you want a slim transition from face material to edge. The CP21053 reference identifies the specific decor family, so matching other components using that same code stays straightforward on the job. The embossed lacquer (EMB LAC) description indicates a textured, coated finish on the band, which supports a more finished edge appearance compared to a raw strip. The 600 foot length is sized for production or multi-cabinet work, reducing roll changes during longer edge runs.
The 15/16 inch width on this Rehau ABS edgebanding gives installers extra material beyond the face of typical boards, which helps during trimming for a straight, chip-free edge. The .018 inch thickness keeps the band slim, which matters when you want the edge to sit close to the board surface without a bulky step. The embossed lacquer finish works as the final visible layer on the edge, so the surface seen after trimming reflects the CP21053 decor and texture. The 600 foot roll format lets shops set up for repeated passes on the same job, which supports consistent results from the first part to the last.
This Rehau ABS edgebanding, under manufacturer part number 716041-356, serves as edge treatment on panels where the CP21053 decor is specified, so it ties into that visual program across doors, ends, and shelves. The 15/16 inch by .018 inch size makes it suitable wherever a modest overhang is needed for trimming without excessive waste. In cabinet shops, this format fits into runs where operators want a repeatable edge dimension at the machine, which is supported by the fixed width and thickness. Because it is identified as ABS edgebanding, it aligns with projects calling for ABS material on exposed edges. The embossed lacquer description defines the final surface that end users will see along the edge, giving designers and builders a predictable look tied directly to this code.
The defined 15/16 inch width on this Rehau ABS edge banding provides a consistent reference for edgebander setup, supporting repeatable trimming across different parts in the same batch. The .018 inch thickness gives operators a known edge height, which helps when dialing in trimming and scraping tools to avoid cutting into the panel face. The CP21053 identifier acts as a reliable label for reordering or matching, so replacement rolls maintain the same appearance over future runs. The embossed lacquer finish noted as EMB LAC establishes the texture and sheen you can plan around when coordinating adjacent surfaces. With a 600 foot roll length, shops can run multiple cabinets or casework sections from a single roll, which supports uniform color and surface character across the whole project.
Rehau ABS edgebanding 716041-356 is specified at 15/16 inch wide by .018 inch thick, giving a modest overhang for trimming while keeping the edge layer slim on the panel.
The CP21053 EMB LAC description indicates a specific decor reference with an embossed lacquer surface, so the band provides a textured, coated finish that matches that code.
The Rehau ABS edgebanding roll is specified at 600 feet, supporting extended cabinet or casework runs from a single roll in shop or job settings.
The 716041-356 product is listed as Rehau ABS edgebanding, so it uses ABS edge banding material for finishing exposed panel edges.
The 15/16 inch width extends slightly beyond typical panel thickness, providing some margin for trimming tools to create a flush, clean edge line.
The manufacturer part number 716041-356 uniquely identifies this Rehau ABS edgebanding, helping buyers match the same decor and size on repeat orders.
This Rehau ABS edgebanding 716041-356 ties a 15/16 inch by .018 inch band to the CP21053 embossed lacquer decor, so edges can follow the same reference across a project. The 600 foot roll supports shop runs where consistent appearance and dimensions matter from part to part. For work that specifies ABS edge banding with this decor code, selecting this product gives a defined material, size, and surface description to build into planning and layout.
Sold In: 1 Roll