Rehau ABS edgebanding 716041-358 is an ABS edge banding from Rehau, Inc. that covers raw panel edges so cabinet and furniture projects get a finished, unified appearance. The 15/16 inch width spans standard panel thicknesses with overhang to trim, which helps installers flush-cut and profile without exposing the core. The .018 inch thickness provides a slim, workable band that bends around edges efficiently, supporting fast, repeatable runs on edgebanders or manual application. The CP10081 designation identifies a specific design match, which matters when aligning edges with coordinated surfaces in a job set. The EMB reference indicates an embossed texture, giving the edge a defined surface that visually aligns with textured panels. The LAC notation signals a lacquer-related surface detail, which supports a consistent look across panels and edges on finished cabinetry.
The 15/16 inch Rehau ABS edge banding spans standard carcass and door panel thicknesses with room to trim, which lets fabricators center the band on the substrate before machining both faces. The .018 inch thickness works well in typical edge banding processes, so feed systems can grip and guide the material without excessive stiffness. The ABS construction supports consistent cutting and scraping, which helps maintain clean reveals when sizing doors and drawer fronts after edging. The specific CP10081, EMB, and LAC identifiers define the look and surface character, so installers can align this roll with matching specifications on shop drawings for a coherent edge treatment.
This Rehau ABS edge banding belongs in cabinet, furniture, and fixture projects where raw substrate edges need to be concealed with a coordinated finish. The 15/16 inch width makes it well suited to edging panels that approximate 3/4 inch thickness, because it leaves enough excess on each side for post-trimming while still handling efficiently in common edgebanding setups. The .018 inch thickness helps the band conform along straight cabinet sides and shelves, so long runs can be processed with consistent pressure. The CP10081 design reference, combined with the EMB embossed texture and LAC surface notation, positions this band for use wherever the specified surface system calls for that exact visual match on doors, drawer fronts, and exposed carcass edges.
The combination of a 15/16 inch width and .018 inch thickness in this ABS edge banding supports repeatable trimming, because installers can align the strip to the panel and still remove material cleanly from both faces. The ABS material responds predictably to cutting, which helps keep edges straight when passing parts through saws or routers after edging. The embossed EMB texture provides a tactile surface that follows the specified design, so the edge reads as part of the overall finish rather than an afterthought. The lacquer-related LAC surface detail helps maintain a consistent visual tone between faces and edges, which reduces visual distractions on door and panel lines. The CP10081 identifier anchors this roll to a defined look in the Rehau system, which simplifies reorders and supports consistent results across multiple phases of a project.
Rehau ABS edgebanding 716041-358 is an ABS edge banding from Rehau, Inc., used to cover and finish exposed edges on cabinet, furniture, and fixture panels.
The 15/16 inch width gives coverage across typical panel thicknesses with extra material, so installers can trim both faces back to a clean, flush edge after bonding.
The .018 inch thickness keeps the edgeband relatively thin and workable, which helps it conform along edges and run smoothly through standard edgebanding equipment.
The CP10081 reference identifies a specific visual design in the Rehau system, helping shops match this edge banding to corresponding decorative surfaces on a job.
EMB indicates an embossed surface texture on the edge banding, which supports visual alignment with textured boards and gives edges a defined surface character.
The LAC notation relates to a lacquer-oriented surface detail, helping this ABS edge banding present a consistent look alongside matching lacquer-based panel finishes.
This Rehau ABS edgebanding 716041-358 combines a 15/16 inch width, .018 inch thickness, and ABS construction with CP10081, EMB, and LAC identifiers, giving shops a defined match for projects built around that design system. For cabinet, furniture, or fixture runs that specify this look, choosing this edge banding supports consistent edges from part to part and phase to phase. Add this Rehau edge banding to align exposed edges with the same visual language as your specified surfaces.
Sold In: 1 Roll